72v Custom Franken Razor SX500 Overview

[@julieannemarcellano2634]

Always a proud wife. No matter how expensive the hobby is 🤣🤣🤣.

[@bolectric]

☺️😘

[@sfgiant79]

🤣🤣🤣

[@bolectric]

@@sfgiant79 you already know 😅😅😅

[@KruseNStuff]

😁

[@onlyhands7183]

Awesome build, nice to hear someone talk specs with detail

[@bolectric]

Thanks, very much appreciated 🙏🏽. I appreciate when other share specs as well so I do my best to reciprocate. I’ll be sure to share specs for future vids 🤙🏽

[@onlyhands7183]

Hey any idea where I may have seen a 72v to 12v 10a converter that isn't from Amazon lol?

[@bolectric]

@@onlyhands7183 I get all my converters/step downs from Amazon lol

[@johnsherby9130]

That luna seat is an amazing idea, also I wanna try stretching my swing arm but I suck at welding

[@thefreitas5573]

Thanks for the shout out!

[@bolectric]

Of course brotha! Your work is solid and I appreciate the link up on this build 🤙🏽

[@knight91066]

♥️♥️♥️From Bangladesh. My wife is always say.. Always with you and with your cazy hobbies " Enen we become homeless☠️ for your crazy hobbies.... Lol So keep it up 👍👌👍

[@bolectric]

Hahaha! My Wife says similar things 😂 Thanks brotha 🤙🏽

[@chuckwillyduece]

Dang I didn't realize the rsf wheels would fit on the 500/650 frame! That's awesome..

[@bolectric]

Yup! You have to play around with spacer combinations but they're pretty much plug n play if you want to try the mini supermoto set up 👍🏽

[@antssta]

Awesome informative and detailed video Molicel definitely the way to go on these smaller amp hour packs Looks like a lot of fun bro, the denzel is one cool little motor

[@bolectric]

Thanks! It's a super fun little street ripper for sure. Going to throw on some knobbys soon and get with the dirt/off road life ha

[@chuyskywlk]

"I don't know if you can hear that" LOL

[@bolectric]

🥴😅

[@RokeroLoko]

Does the motor bolts right up? I have an rsf 650 looking to put one of them motors what do i need

[@bolectric]

Unfortunately not. Look into the Sotion FW11 which is a bolt on motor for the razor bikes.

[@KruseNStuff]

EXCELLENT EXCELLENT Video MAN. Got my Sub NO DOUBT. LOVE the build.🔥🔥💯🍻

[@bolectric]

Appreciate the love 🙏🏽

[@jordanfloyd8081]

Bro so awesome

[@bolectric]

Thank you sir! 🤙🏽🙏🏽

[@daflip1500]

Did you hook up your 72v to 12v voltage regulator to the positive and negative leads on the controller or the battery itself? I was gonna run head lights and rear light for mine but i cant decide weather just to get a xt90 parallel splitter to power my lights or just get another power source for my lights

[@bolectric]

Directly to the positive and negative terminals on the Kelly controller. I have a decent capacity pack (29.4Ah | 2,116Wh) and my lights don't draw much power so it's fine for my set up. I'm also about convenience and didn't want to have to maintain and charge another pack lol.

[@daflip1500]

@@bolectric nice thank-you i wasnt sure if hooking my voltage regulator to my kelly controller will effect the the amps drawn from my battery. Did you put any fuses or relays for your lights or just straight up wire them from regulator ?

[@daflip1500]

@@bolectric my lights came with a wiring harness and im sure these voltage regulators have some sort of overcurrent protection idk how good they are though and if i trust it enough without relays lol

[@bolectric]

@@daflip1500 I have an in-line fuse coming from the step downs positive lead to a wire connector. All my 12v lights are connected to individual switches but my step down isn't connected to a relay or switch. You might want to hook up your step down to a switch if you're concerned about it possibly draining your pack..

[@daflip1500]

@@bolectric so from the kelly controller to the voltage regulator. Then hook up relay and fuse to the positive going out to my device. Thanks

[@The2011tahoe]

Very informative .. thanks for explaining everything in detail.. you just answered like almost every question I had to ask ….. thanks very much

[@bolectric]

You're very welcome! Happy building and ride safe out there 🤙🏽

[@fishermena758]

Keep on making videos like this I love them

[@bolectric]

Will do thanks for the love! I just installed some knobby tires and a 3 speed switch so I'll do another video soon 🤙🏽

[@glitch-light]

Beautiful just beautiful 👍❤👊

[@bolectric]

Appreciate the love 🙏🏽

[@juliovictorcardona2135]

What do you recommend for a Adult 5'8" 170lbs? And whats the difference between the RSF650 AND MX650, SX500? I'm looking to buy and not sure because the mx is 100 dollars cheaper. What ever I buy I will be Modding

[@danielseverino8491]

nice lovit 😍😍😍

[@fifthoneoh]

Quality content!

[@bolectric]

🦾

[@noce1071]

Is the denzel motor a better motor then the my1020. Does it perform better.

[@bolectric]

I'd say yes. Overall it's a better motor and performs better. Better build quality and internals. It could also take a lot more heat than the MY1020 and has an integrated heat sink as part of the motor housing.

[@noce1071]

@@bolectric could you help me in locating a front sprocket of the motor. I have been looking and haven't had any luck. Thanks

[@bolectric]

@@noce1071 I had the same issue. I tried getting help from Denzel for months and months.. They were irresponsive and unwilling to assist..

[@noce1071]

@@bolectric that sucks. Where did you finally get one , from denzel when the finally got back to you

[@bolectric]

@@noce1071 I was running the one that came with the motor which was a custom 428 10t. Was never able to obtain anything different..

[@alvinlax]

👌🏽👌🏽👌🏽

[@bolectric]

🤙🏽

[@GasBrakeSim]

I subbed bro. Good channel man.

[@bolectric]

Appreciate you 🙏🏽

[@jasperhart1188]

show us how to program the kelly controller. I'm about to buy a kelly controller, just a lil intimidated by the computer aspect of the controller. I wanna check that motor out.

[@bolectric]

I highly recommend getting the Kelly KVD7212NX+ from Electro & Co w/their EMX Pre Tune service. I've tried different tunes/programs on the Kelly kvd and they have the best hands down.

[@NiteJerk]

Badass, keep the content coming. Subbed.

[@bolectric]

Thank you! 🙏🏽🙏🏽🙏🏽

[@noce1071]

I'm looking to do a D5500 motor on my RSF650. I've been looking for a motor sprocket. Can you point me in the right direction. Thanks

[@bolectric]

I unfortunately cannot recommend Denzel due to their big lack of communication and after sales support. Have you looked into the QS165 V2?

[@noce1071]

@@bolectric what kind of problems did you have.

[@mintmotos3650]

Great video! Just subbed my guy👊🏾

[@bolectric]

Appreciate it brotha 🙏🏽

[@videntemusic2465]

Hi bro how extended the swing arm for you ?

[@bolectric]

4" stretch

[@daflip1500]

Where are those forks from and is there alot of fabrication involved? Or did they kinda fit?

[@bolectric]

They are the piranha pit bike forks but have been sold out for 6+ months now. I had to get some custom bearing cup adapters made along with aftermarket triples. Any fluid fork on a razor will pretty much require fabrication and modification..

[@monicababy1056]

How can I get in contact with Elmiro pez so he can help me extend 4 inches from my frame like yours. I'm located in San leandro ca as well help me out bro

[@bolectric]

He’s on Facebook.

[@monicababy1056]

Thanks bro

[@OperationEndGame]

Where in the Bay Area? Can I contract you to build one of these?

[@bolectric]

I'm located in the Hayward/East Bay Area. However, I'll be moving out of state next month and have put a temporary pause on building. I do plan on shipping full builds in the future so stay tuned!

[@simmack17]

Where can i buy same motor

[@bolectric]

I have the D4500 which is an older model/motor. They now sell the D5500 here: denzel.bike/d5500.html It's worthy to note that they do not have the best response time and after sales support, so don't have any high expectations if you do decide to pull the trigger 😅

[@simmack17]

Thanks bolectric sweet razor

[@archangel_yt8116]

finally found the tires lmao.

[@bolectric]

👍🏽👍🏽

[@monicababy1056]

We need a video bro

[@bolectric]

Stay tuned!

[@monicababy1056]

Last ? What kid handle bars u have on you're bike they nice i need those thanks again

[@bolectric]

www.amazon.com/gp/product/B0752BSRDD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[@monicababy1056]

Thanks bro

[@noce1071]

Where do I get a set of fork bearing cups . How much were the cups .

[@bolectric]

There are some members on the modified razors and modified razors for adults groups on Facebook that make/sell them. You're looking at around $150+ I believe depending on where you source them..

[@Battshimself]

Any way to use that seat and the CFR plastics?

[@bolectric]

I haven't any experience with the crf plastics yet so I unfortunately wouldn't be able to say. You would def have to mod it regardless.

[@schmeglyomigy6174]

What is the rear shock called? Thanks in advance

[@bolectric]

Fox float

[@schmeglyomigy6174]

Ok thanks. How many mm long is it

[@bolectric]

@@schmeglyomigy6174 210 x 55

[@doraltobravo3206]

What handle bars are you using

[@bolectric]

WEIYINGSI Handle Bar 7/8" 22MM Handlebar with Foam Pad Compatible with CRF YZF KXF KLX RMZ DRZ Pit Dirt Bike Motocross ATV Quad Black

[@simple6786]

How much were the front forks, cups and adapters?

[@bolectric]

Piranha pit bike forks were about $188 shipped but they've been sold out for months now. Bearing cup adapters and aftermarket triple clamps were another $200 or so..

[@simple6786]

@@bolectric Damn, that's a lot. Might just have to stick with the stock one's with a lift. I appreciate the reply.

[@bolectric]

@@simple6786 np. A lift kit is def the most economic option but fluid forks make a huge difference IMO. I always tell people that you gotta pay to play for quality and performance in this hobby 😅

[@simple6786]

@@bolectric oh yeah I know. But I didn't even put that much into my grom forks. Just upgraded to Oilins stiffer springs and fork oil.

[@AirTsinelas]

That thing is savage! How can I get in touch with the guy that did your swingarm? I need one in my life.

[@bolectric]

Thanks! facebook.com/tattooz.by.pEz

[@AirTsinelas]

Thank you as well, sent my swingarm to him yesterday! Also, did you keep the stock freewheel on for the rear sprocket?

[@bolectric]

@@AirTsinelas Np and awesome! I had my stock freewheel welded. Feels a great deal better over stock.

[@AirTsinelas]

Yoo, received my swingarm back from Pez and RSF wheels, 420 chain/sprockets. Did you have issues with sprocket alignment? With everything mounted besides chain and caliper, I can see it’s pretty far off. Thoughts?

[@bolectric]

@@AirTsinelas that's pretty typical when you start modding and use a different wheel set up. Try different spacer and washer combos till you can get it aligned. You can also use something like a ruler or straight edge against the rear and motor sprocket to help you get the proper alignment.

[@schmeglyomigy6174]

How much did the swing arm cost you

[@bolectric]

I think around $125. I'm running this swingarm on my latest SX500 build: electrocyclegarage.com/products/bolt-on-extended-swingarm?variant=44793550733601

[@schmeglyomigy6174]

Oh nice. That swing arm you linked is very expensive though. How does it compare to the $125 one you bought?

[@bolectric]

@@schmeglyomigy6174 that's actually one the best priced swing arms for what you get as you'll be paying upwards of $400 for something completely custom. The electrocycle swingarm is better as it's slotted so you don't have to run a chain tensioner along with an adjustable brake mount. It also comes with a nice rear axle and axle nuts. Very well thought out and designed piece IMO.

[@schmeglyomigy6174]

I started looking around and I see what your are saying. I was getting quoted for $500 from keaton scarlott. Where did you get the swingarm for $125 and where can I get one that cheap?

[@bolectric]

@@schmeglyomigy6174 I personally would go with Royce Ramirez if you're looking for a fully custom swingarm or www.midwestminimods.com I only paid $125 since it was a 4" extension to the existing swingarm and that was about 2+ years ago. Prices are a lot higher now..

[@Bucketttttt]

How much was the build? And would u sell these

[@bolectric]

About $2,800. I do plan on selling some fully built bikes in the future.

[@1790jman]

What bars u running my mx500 needs to look like that lol

[@bolectric]

WEIYINGSI Handle Bar 7/8" 22MM... www.amazon.com/dp/B0752BSRDD?ref=ppx_pop_mob_ap_share

[@1790jman]

@@bolectric I never would have guessed that lol sweet bike tho I’m building the same bike I wanted the fork u have sold out

[@joshuadarrington.]

Would I be able to pay for a build from you?

[@bolectric]

I do plan on shipping in the continental US in the future so it'll def be an option 👍🏽

[@joshuadarrington.]

@@bolectric how can I keep in contact bro, planning to purchase one in the next year. Will pay well for a build

[@bolectric]

@@joshuadarrington. Sounds good and I'd be honored ☺️! [e-mail] IG: @_bolectric_ Facebook: facebook.com/bolectric/ 🤙🏽🦾

[@KeatonsCarlott]

Flattered. Looks like a near exact copy of ours !!

[@bolectric]

The hall sensors on my 72v 3kw Vevor decided to stop working right before a group ride so I just transplanted all my parts onto the sx frame w/a better motor hehe

[@GrowDatSolja]

Link for rotor and HD brakes system

[@bolectric]

Bicycle Disc Brake Rotor, 160mm Stainless Steel Bicycle Rotors, Mountain Bike Flange Disc Brake Kit, Threaded Hubs Brake Disc Rotor Flange Adapter with 6 Bolts a.co/d/hKbMcRA Magura USA MT7 Pro Disc Brake Black/Neon Yellow, Left or Right a.co/d/inwRur8

[@Chasedroog]

Very nice build, the qs motor seems like it has tons of power. Check out my build if interested, one love

[@bolectric]

thanks! It's actually a Denzel D4500 motor but I do have a qs build in the works = ) I'll def check out your stuff.

[@archangel_yt8116]

Ik what im building when i can. Lol

[@bolectric]

👊🏽. I unfortunately can't recommend purchasing a Denzel motor though. Although it performs well and can take quite a bit of amps, their customer service and after sales support is pretty much non existent 😬

[@archangel_yt8116]

@@bolectric i was thinking of doing a different motor tbh. But the rest looks really nice

[@bolectric]

@@archangel_yt8116 ok good lol and thanks!

[@ProMountainBiker]

Rattanak just died if you didn’t know. Very sad

[@bolectric]

We're aware and deeply saddened by this tragic loss..