#8 - Controlling Audio of the UX Series Cameras

[@SDPickups]

thanks for doing these videos and the book. I just sent back a JVC that was just awful. You convinced me to go all out and get the UX180 and can't say how HAPPY I am with this camera. It has more features than I'll ever use, but if I ever need to get really nerdy I know those things are there. Also, you've educated me a lot on how to use these cameras and good video procedures to use that I knew nothing about, a newbie in many ways. The UX180 is almost completely faultless, I've used many Panasonic products going back to the late 70's and all them have been exceptionally great and never any problems.

[@KoenLaureij]

Thanks for this explanation. As you say, channel 1 and channel 2 can be seen as your left and right speaker. When I use a microphone at input 1, and another one at input 2, the camera create something like 'mono' sound. Input 1 will be on the left, input 2 on the right. Offcourse I can set it over two speakers later, but then it's a straight line and their won't be a difference between left and right. How can I use two inputs (two different microphones) en still get stereo sound from both of them?

[@Heli4213]

I just bought the panasonic HX 20. I also bought a RODE external stereo microphone. I am new with this and have no clue. I mainly just shoot air shows for fun. Please give me some suggestions on where to put stuff for audio please. Also, somebody mentioned something about a book, maybe that you have????

[@yatoproductions163]

Hi, if you change the input mic level from -60db to -50db will that make the volume louder as you are reducing the DB 10 less?

[@washakiecountyconservation2989]

Can you go over what wireless mic might be good to use?

[@gracaemusica]

Thank you so much! Great explaination!

[@avtarkasoulino.1363]

Very good sar

[@ali_turhan]

can you plug in a lapel mic jack saramsonic

[@realtyvideoproductions7131]

I have the Panasonic HC-X1 same camera your discussing, I also use the Panasonic AG-MC200G shotgun microphone, while shooting video I had a complaint from people around me of a high pitch sound hurting their ears, when I disconnected the microphone the high pitch went away, I was unable to hear the sound myself because I have a high pitch hearing loss. Is there a setting that would cause this high pitch sound coming from my camera?

Where is auto limiter function for built in microphone ? Is in ALC - ON ??

[@slvphotographyrajasekhar8947]

Panasonic cx350 color setting explain sir

[@MrAmERICn]

Great explanation. Thank you

[@outofthebiz]

Regarding Channel 1 and Channel 2. Will I still get stereo sound on my edited program if I just use one channel? On my old Canon, I had to split the signal from one mic into both XLR ports to get this to work.

[@ScottRBeck]

Barry, Is it possible to output hdmi and use the audio out (red and white rca) simultaneously? I am doing legal video and that option would be helpful, I see in the menu option menu>output setup>av out - that is selected but it is not passing audio??

[@agonajeti9029]

Can i Use one shotgun mic to feed two channels with audio ch1 and ch2 , with this set up on audio section input 1 is external mic +48v , ch2 to input 1 mic ?!

[@rhsharp]

Excellent tutorial!

[@0598433759]

ممكن شرح إعادة تعين رقم الصوت الخارجي

[@bruce8209]

i can understand thre is no time to aswer all the q. for you, but panasonic should do this: it's there product and rto get a good name for the service. May be a link on there site to this video's?

[@betleem]

Can I connect this camera to DI and to HDMI at the same time? Or how can I sue an external monitor?

[@Froggygaming16]

Fantastic. Well worth watching

[@joefish1969]

i have a question when recording if i use an external mic on ch 1 input 1 and the internal mic on ch2 will i get 2 seperate audio files. you said in video you use it as backup for safety purposes.

[@CharlieDIYte]

Very good question. I have the shot gun mike in input 2 and a levalier on input 1 on my HC-X1 (the UX180) and in the Premier Elements editing software I use you see two channels in the audio file. However I haven't worked out how to separate them. Thought I'd reply because clearly no one at Panasonic or Mike for that matter curates the comments section which is pretty poor.

[@onesteppictures]

For anyone curious about the terrible delay on the UX90 through the headphones. I may have found the solution! In "OUTPUT SETUP" there is "H/PHONE MODE" and it has a default setting on "RECORDING" which creates the delay we hear. Set it to "LIVE" and the delay is gone! I almost though the preamps on the UX90 were awful or something. What a thing! Terrible default setting if you ask me.

[@jigarparmar1545]

Plz upload video dorts remove in cemera

[@dimco1825]

Thanks OSP, this just saved my day! Our Photogs had been putting up with this issue until now. I just googled it for them and found this video and your comment. Cheers!

[@kckaufmaninla]

Brilliant, thanks!

[@sixto782]

I can't find anything like this regarding the HC-X1 and the manual I'm sorry to say is severely lacking in this department but as far as I can tell everything discussed here is identical on the HC-X1. Is there anything different that I should know regarding audio control on the HC-X1? If not it might be a good idea to re-title this for those working with the HC-X1 or other models that are similar in set up.

This is same camera, I have HC X1, same

[@FrankRRoksy]

A great explanation!

[@carabostock1414]

I've got two Rode Mics plugged into the Inputs and I'm getting a lot of background noise buzzing/fuzzing - does anyone know how to fix this?

[@Pana170]

I see in this video that you are not using the original battery. Is this a CGA-D54? ( The original battery from a HVX or HPX )

[@medlicottjg]

Can I monitor only 1 channel in the headphones?

[@Fogcitycine]

Does anyone happen to know how to turn off audio coming out of HDMI???

[@mediabees4413]

We have ux90, and are facing heavy distortion while recording the video....

[@musthaquetc]

How to input hdmi and record to SD card for agux180 From other live mislxing system out

[@nadafdigitalstudioboroti6793]

I want special UX 90 Tutorial please send

[@JituVyasJAIBHOLENATH]

Very use to for me thank you

[@smsstudionokha5941]

Panasonic ux90 Camera version update video

[@Audiovisualesbmp]

HELLO CUESTION -- MONITORIN THE AUDIO WIHT HEADPHONES - WERE IS THE VOLUMEN WHEN RECORDING?? THANKS.

[@apnewz]

When u use headphone, u will automatically found one option on Display, VOLUME, Select the option using by scroll button, after that press scroll button, enter into the VOLUME, Now scroll up and down to set your desired volume level, #Ascertainindia

[@mikemaki6204]

My camera stopped recording audio altogether for some reason. I am searching all over the place on how to turn it back on.

[@lawrencehawkins7198]

Gratitude.

[@JRFilmsAMStudio]

Very nice.... 4k for video

[@paulcolbourne5555]

Thank you

[@nadafdigitalstudioboroti6793]

For ux90 Panasonic remote control wech company best remote

[@tokemotoke1728]

Thanks

[@williamsancheztv4683]

Spanish toturial Please

[@121opful]

Audio settings /This video in hindi

[@yellowhead8001]

Speaking of audio, you need to speak louder. can hardly hear what you are saying.

[@rodrigobelinchon2982]

The audio preamps in this camera are pure crap. They are so noisy that even though it uses 16 bit 48khz it sounds like a fucking type I cassette. Yes , like a crappy 2 dollar tape . It is insulting.