80 volt Atlas Chainsaw

Рет қаралды 3,274

Күн бұрын

Пікірлер: 54

@gordonbickel7182 Жыл бұрын

I own one for three-year now and now the battery will get thru 6 cut and the batteries are out of power. Anyone else having this issue?

@timberandtools Жыл бұрын

I never run it very long but I’m Not suprised to hear that! Harbor freight is usually great with most stuff but definitely not these 🤦‍♂️

@gmeister03 6 ай бұрын

Idk if you got a new one, but you can hear the rpm’s are down. Might be a bad motor. Did you replace it yet?

@timberandtools 6 ай бұрын

@@gmeister03 no not yet

@timberandtools 6 ай бұрын

@@gmeister03 it was never right

@davidallen3451 2 ай бұрын

Which one did you get? The 16 inch or the 18 inch? The 16 inch runs 40v and probably has issues with anything bigger than a hedge. I have the 18 inch that runs 80v and i chopped up a 30-40ft tree that came down during a storm with 2 fully charged batteries.

@timberandtools 2 ай бұрын

18” but I dropped to a 16 to see if it helped it didn’t haha. Think it’s just a defective hnit

@mylesm7947 4 ай бұрын

It doesn't like that echo bar

@timberandtools 4 ай бұрын

@@mylesm7947 ahahaha it didn’t like the atlas bar ether 😂😂

@cron410 3 ай бұрын

I have a Husqvarna battery climbing saw that does this, but it's from being dropped out of a tree at maybe 40ft. The shaft that goes through the brake assembly is bent and this causes excessive load on the motor, so it shuts down and blinks the overheat protection light.

@timberandtools 3 ай бұрын

Dang those are expensive!

@EvanWolfe-ec2fk 6 ай бұрын

Take it back to HF and they will replace it! Sounds like it may have a thermal switch that’s tripping.

@timberandtools 6 ай бұрын

@@EvanWolfe-ec2fk sounds like a culprit no doubt

@brandonblankenship5293 10 ай бұрын

I love mine. I use the xtreme batteries. Plenty of power and cuts a long time. I think you probably have. Bad battery. If it’s not the battery it’s an issue with the chainsaw.

@timberandtools 10 ай бұрын

Two batteries so def a saw issue! Tbh first bad hft tool I’ve gotten in a long time

@brandonblankenship5293 10 ай бұрын

@@timberandtools it happens..I get the two year replacement when I get something from them.

@timberandtools 10 ай бұрын

@@brandonblankenship5293 not a bad idea!

@Derrek4Real 10 ай бұрын

I always get the 2 year replacement and then before 2 years is up get a new one and add replacement again. I saw a few reviews like that. Same issue as u.

@timberandtools 10 ай бұрын

@@Derrek4Real yeah it works for my needs as I only make small cuts with it but it sucks for sure ! The warranty is worth it

@DanaKing-uf6oy 7 ай бұрын

Try putting the original bar and chain back on and see if it cuts any better.Thanks for the video.

@timberandtools 7 ай бұрын

It is exactly the same with bar it came with. I am using this one because it’s 16 inches instead of 18 and I thought it might help but it did not.

@noeenriquez4221 3 ай бұрын

Awesome! I need to buy me one a lot of the lines and oaks around my home fell during hurricane Helene and I need to clean up and use as firewood

@timberandtools 3 ай бұрын

@@noeenriquez4221 I didn’t have a great experience with mine but just get the warranty

@jamessutherland1911 11 ай бұрын

I've had pretty good luck with mine

@timberandtools 11 ай бұрын

That’s good to hear 👌🏻 I love HFT and rarely get a dud product from them!!

@MountainMythos 11 ай бұрын

Yeah... most people have a good experience with that saw. I believe your just one of those kind of guys who will down a product when your the problem. Don't leave your battery powered ANYTHING laying on the ground, it will ruin the battery. And if your just trolling to try to get people in the comments for engagement find a better way.....be better broham. Be better.

@MountainMythos 11 ай бұрын

Lol....

@timberandtools 11 ай бұрын

@@MountainMythos yeah, I guess you haven’t looked at the rest of my KZbin channel… I guess you need to be better🤣

@mike7044863 6 ай бұрын

Actually it's a good thing . Ever notice on a gas chainsaw you get half way through and it binds up ......we'll this is just the same thing only it shuts the chain saw off to protect it . Same way with the lawnmower ect

@timberandtools 6 ай бұрын

@@mike7044863 no it’s not that at all. It’s legitimately broken. I run a chainsaw for a living and this isn’t binding or getting cut in the cut…

@mike7044863 6 ай бұрын

@timberandtools I have the 80volt lawnmower and its the bomb . Yet it will shut down if I hit a hayfield . I think as long as you keep the blade xtra sharp it'll make a diff. I've seen a few other vids and they seem pleased with it

@timberandtools 6 ай бұрын

@@mike7044863 I have the 80v weed wacker and it’s great. This chainsaw sucks lol it is definitely broken.

@mike7044863 6 ай бұрын

@timberandtools ya I got the weed Wacker as well . Batt on lawnmower obviously goes out quicker under stress but I can do my back yard , front yard and both of my neighbors front yards with 2 bars left on batt after I'm done . Chain saw I'm sure that blade needs to be sharpened each use .....I sharpen my own with a dremel while it's on the saw so I'm going to give this a shot

@timberandtools 6 ай бұрын

@@mike7044863 chain was sharp, even put a smaller 16” bar on it too same

@hodaboy1 7 ай бұрын

could it be that the bar and chain are not good for the chainsaw.. maybe a thinner bar like the original is needed.

@timberandtools 7 ай бұрын

No definitely not the case. I had the same effect with the original bar and chain. I reduced the bar size down to 16 inches in hopes that it was going to help with no change at all.