🏁 800+ Horsepower Turbo Buick 🏁 2023 GS Nationals - Watts Performance Solutions

[@kennybodhaine6558]

I'm still doing it in the PNW. 9.77 pump gas/alcohol through three mufflers and stock ECM and using a LS MAF sensor. These are amazing cars👍👍. Glad to see guys still racing Turbo Buicks! Very nice build. Long drive to Bowling Green for us PNW folks.

[@donaldhaddock9538]

I was there, that car is wicked! Great job brother! 🇺🇸🇺🇸

[@mattsiev1]

Cleanest car at the Nats doing laps. Keep up the great work, Team!

[@wattsperformance]

Thank you 🫶🏾

[@EllisWilliams-k9c]

That’s one of the cleanest and Great setup GN I have ever seen I have seen them all I bought my GN in 87 and have owned it an raced it still to this day and I’m retired but not from drag racing

[@wattsperformance]

Thank you. Keeping it sexy with #1CleanT 🫶🏾

[@JohnSmith41893]

[@workturbo]

I love turbo Buicks ;) Great job as always Dev! Cannot wait for what is all to come out of the Watt's Performance Team!! #justgettingstarted :D

[@wattsperformance]

Thanks Reed! We greatly appreciate you and your support! This drivetrain is coming out next week. We're moving on to our new TA build. It'll be powered by another Work Turbo. #BlessedHands 🪄✨

[@bdog3869]

Nice video of 1CleanT. Nice racing too👍👍👍

[@alexcrudello3672]

Love you guys keep the Turbo V6 Torch! 1992- Grand National vs Mustang shoot out. Duttweilder, Buddy Cox’s, Lawrence Connolly, Jim D’ Allesandro,Jim Hause, Otto Jones, ANS performance Barton I believe. Big AL Iskawitz.I wish I could have competed, ! Stay Boosted Guys! Thanks.

[@wattsperformance]

Thank you so much! We'll keep that flame going 🔥🔥🔥🔥

[@ExecuteBrandon]

Great color on that GNX!

[@carlhammar8891]

Dev, where's the time slip for the last round ? I might make it out to Atlanta in the next few weeks, would love to stop by and say hi. It's been a while. Great job on this video and great racing Brother !

[@terrymartin3272]

Been keeping an eye on you guys . Job well done. I have an 86 GN that if some things come together would like to talk. Good job.

[@wattsperformance]

Thanks for the support! When you're ready to build, we gotcha covered!

[@mazterplumber2549]

Love this ,next year I’m going with my car

[@wattsperformance]

Please do! We gotta keep this event going strong

[@Ruger44Redhawk]

Love the GN. Especially when they destroy modern muscle.

[@thefultonfamily2702]

Gloryyyy my dream car I love Gnx best gbody ever

[@dug87m44]

Amazing runs 🫡💪🏽

[@wattsperformance]

Thank you 💪🏾

[@HSTvids357]

How's your 4l80e experience been? Surprised I don't see more of these cars with them, just got my Circle D 245mm triple disk in the mail for my swap. I'm not looking at low 9's, I'm just looking at 10's, but I want that 'set it and forget it' reliability for a few years. That blue just kills me every time!

[@wattsperformance]

4l80e swap = 💕 It's been such a great experience. Our trans is equipped with a rossler D3 Transbrake and it's great for personal best testing. However, considering the amount of time it takes to engage/release we wouldn't recommend it for competition. Within this race event, we just used the two step without Transbrake for racing. In regards to your comment on why more people aren't doing it, I believe the main factor is cost. We've got close to $10k in our swap, which is double the cost of a well built 200-4r build. 9/10 of our clients goals would align better with the factory transmission. && Dark Metallic Blue for the Win 💙

[@rcadventures4342]

Awesome runs…

[@danielanderson8502]

Nice!!!!

[@rondart5405]

Ole boy tried to burn you down on last race

[@wattsperformance]

Of course... But what can we do about it now, besides building something a full second faster? 🤫🤫🤫 Stay tuned. #1CleanT is going to a new level 💯🫶🏾

[@LS2BOI]

Where is this shop located need to ship mine to you asap

[@turbo_ivo]

🔥🔥🔥

[@Mississippi_Money]

When and where can I drop my block off at definitely would love to get a good street build

[@wattsperformance]

Let's further discuss this topic. Please click the link below to book a time to connect with us. ✏️Completely fill out the form so that we can be prepared for the meeting. calendly.com/wattsperformance/30min

[@Mississippi_Money]

@@wattsperformance ok thanks

[@alexcrudello3672]

To Bad Ron Fuchy didn’t make the first shoot out !

[@alexcrudello3672]

Tweeked!

[@1SIK335]

Man I LOVE my 335, especially with the AWD! But I do love GN's and wish my car had a 3.8 instead of a 3.0, that's the only thing I'd change about it! kzbin.info/www/bejne/i3Ktd2akmpqXjqc

[@buickdude69]

I’m a V8 Buick guy but love all BUICK powered Buicks. I unfortunately have 2 turbo cars at the moment, 1 I’ve had over 32 years. Would love to know the combo of the Blue T down to the wheel and tire size. I’m assuming the winner of the last round is with y’all as well . You asked in the video for suggestions for builds. Here is mine, take a Buick 350, and use that turbo on it and everything else. Just need fuel injection, a girdle and forged internals like the 231. The 231 is a Buick 350 with the back 2 cylinders wacked off and that is old news. Would love to see Buick V8s in these cars instead of dog pie chebby’s, like these idiots have been doing .

[@brianmathew09]

talk about being held out at the light,,,hope he at least got an apology ,,and maybe some new ATF.

[@Stevexnycautomotive]

Not 800hp

[@brianmathew09]

really genius?enlighten us as to how much HP it takes to move a 3500Lb car to 143Mph?

[@jonathancrews169]

Considering this GN would be close to taking out a plaid S which has 1020hp and weighs 1000lbs more.i would say this GN is def 800hp or so.

[@rad87gn]

Use an e.t./mph/weight calculator and it is 800 hp!!

[@stephenhans189]

LoL 🙈🏁

[@tonecapone1]

Dialed...

[@wattsperformance]

Thank you! She behaved nicely 😜

[@S58PSHIFTING]

Great set up the GN has, just needs a black paint job and he's good.