800cc Honda Odyssey Engine Swap Ep.3

[@darrellcoy]

Technical term of the day, "super extra strong". It lies somewhere between "it aint goin no where" and "its bullet proof".

[@GrindHardPlumbingCo]

Word haha

[@h.r.puffnstuff8705]

I hear you. I convert metrics to Chunthairs.

[@andrewhowell6584]

"It's good enough for that "

[@iamlonefrog4252]

When I'm woodworking in the shop now, I have this epic "Grind Hard" stance I take and play U-132 in my head and vision myself routing in slow mo with the wood chips flying like grind sparks. I think I leveled up.

[@GrindHardPlumbingCo]

Heck yeah that is awesome! Glad you dig my music too. You should make a woodworking video to it!

[@garypaisley]

I appreciate the fact that you take the time and effort to properly engineer and fabricate your projects.

[@DiversifiedMachinist]

As a machinist/fitter/ fabricator, I can get into this kind of thing. Great work.

[@bradylowther824]

I hope you guys never quit building cool stuff I honestly love watching these videos

[@MrNosajwhitey]

Like seeing safety being priority especially when you should have a lot of power

[@JnixMarshel]

Man y'alls channel is getting pretty good traction. I got here in the middle of the turbo Barbie car and you guys have grown so much. Keep up the great work fellas, from a Texas plumber.

[@GrindHardPlumbingCo]

Thanks man! We appreciate the support!

[@JnixMarshel]

@@GrindHardPlumbingCo no problem , I appreciate the awesome content.

[@wouterveidhuis8653]

I just noticed that the amazing music you guys always use is made by Edwin! I love how Edwin does the filming/music and Ethan the fabricating(mostly). You guys work so perfect together!

[@DkzFrank]

The ethan cam is great. I love your vids. Been here since the barbie car. You're projects are great. I wish i had the tools and materials for theese kind of things :)

[@luiscovarrubias1075]

1:30 the welding mask makes the shadow look like a dog 🤣

[@corndawg0024]

Luis Covarrubias 😂😂😂 can never be unseen

[@robot538]

Is that actually the dogs bowl? Dunno if that is safe for the dog to drink that haha...

[@dashfax]

woahh

[@kirkjohnson9353]

They had a dog two years ago that was brutally murdered by a bear- right in the shop. Sometimes when the moon is full they can hear howling coming from the cold, empty building. Poor Arfy. RIP

[@eyeballengineering7007]

Fricken EXCELLENT as always! I did a 440cc snowmobile swap in a 250 Odessey as a kid. I'm sure this will be leaps and bounds better. I notice you guys are on a very fast learning curve. Bravo!

[@GrindHardPlumbingCo]

Like our Facebook here facebook.com/grindhardplumbingco/ Shout out to Moto Mule for the custom part check his channel here kzbin.info Music By Akina Boy 0:00 Companion Cube - OP1 kzbin.info/www/bejne/qpesdmSqjpWggas 2:00 U132 kzbin.info/www/bejne/sKHSYmqlhNydfMU 7:42 Rally Track kzbin.info/www/bejne/kH-wmqGqmKqppac 10:36 Grind Hard soundcloud.com/akinaboy

[@motomule]

Thanks so much for the huge shout-out!! I need to get to work on my golf cart, you guys are way ahead of me now!!! Awesome video as always!!

[@benjamincostantino4877]

Saludos desde Argentina🇦🇷!

[@DiversifiedMachinist]

Just made my weekend seeing another Odessey video!! Can't wait till next week.

[@GrindHardPlumbingCo]

Awesome to hear! Thanks for watching

[@dillinheater]

Love it man, the Ethan cam was a great new addition. 90s kid right here🤘🏼

[@GrindHardPlumbingCo]

Yes awesome we will keep it up!

[@CarswithNash]

Looks great! Awesome fab work as always.

[@GrindHardPlumbingCo]

You are a legend Matt!

[@mikeparker5945]

Nice work guys! Cant wait to see it shred the back tires. That thing would be like strapping yourself to a balloon and letting it go in a hurricane!!!!! Love it. Keep up the good work!

[@philmycracken9372]

Awesome work from both sides of the videos guys. Favorite new channel to binge!

[@Ethan-ck6iz]

Aaaw, thought you were swapping a Honda minivan engine onto that go kart lol

[@kylebarns7129]

Thank you guys. I just got home from work, your video made my night better. She is coming along nicely.. Have a great weekend gentleman.

[@Dogfish47]

I really liked the episode format and focus on the smaller details, keep being legends!

[@tylermason3341]

I just wanted to say that you guys are my favorite channel to watch I love the way you edite the fab parts instead of taking them out and just the all around fabrication is amazing

[@joshrobinson856]

Got to ride an Odyssey back in the day that had a 440 snowmobile motor in it. That thing was fun.

[@traviscool2121]

What’s up 90’s kids? Where you at?! The Ethan cam, was of utmost need. This video was great, seeing the collaboration & new features as well as some new music(?)! Love it. You guys bust ass & I love that you’re tearing apart a Polaris! lol Ski-doo for life.

[@NSXTACY420]

I would kill to own that Piranha ironworker, whoever is letting you use it is the nicest person in the world. I decided to order a Rogue fab M600 for my next tubing bender, thanks to you guys. Can you give us an update on how much the Rogue fab bender fits the bill?

[@GrindHardPlumbingCo]

The piranha is definitely an awesome tool to have around! And we love our Rogue Fab bender. I’ve never really used any other bender, but I’ve seen them and as far as I can tell the Rogue Fab is definitely superior. It has worked perfectly for everything we’ve used it for! -Ethan

[@NSXTACY420]

I Love fellow youtuber builders helping each other out. That Moto Mule guy is NO JOKE, and neither are you guys!

[@calebpeterson8322]

Everytime I hear your new song is flashes me back to my childhood spending hours playing adventure racing on n64😂 keep up the killer work🤘

[@scottroberts7496]

I thought it was wave race

[@calebpeterson8322]

@@scottroberts7496 could be in that too idk, never played that. I know it's in beetle adventure racing for sure

[@ViperDemonWright]

This channel has definitely given me some ideas and inspirations for my next project. Great content keep it up!

[@GrindHardPlumbingCo]

Great to hear!

[@doomman700]

We use to float secondary’s, easier on belts. Not sure why more folks don’t today. You just don’t want the secondary binding up on the shaft let it float.

[@joshhughes9966]

Was gunna leave a comment being like “yeah the Ethan cam is cool” but I just love how you film your videos in general aha. Keep killin it👊

[@GrindHardPlumbingCo]

Thanks man!

[@andyb4236]

The build quality keeps getting better! 👍🏻👍🏻👍🏻

[@fergusonhr]

Hurry up and make the next video...you have the best project going on KZbin right now...

[@Lord_Verminaard]

This thing is going to be more bonkers than the Barbie Jeep. Great work so far guys!

[@theejoeylee]

First ATV I ever drove was one of these back in like 1990. I was about 10. Bringing back some memories. I've never owned an ATV of any sort, perhaps I should look for one of these and take on a project myself out of nostalgia

[@DylanC828]

Watching this while waiting for a job interview... I got this

[@victoreboli211]

Good luck😀

[@GrindHardPlumbingCo]

Awesome how did it go?

[@DylanC828]

Pretty good actually! Thanks lol

[@JasonStaleyFitness]

Idk what the music is called but it gets me hyped every video lol

[@talinegle6182]

BackWoods Riding same doggo

[@marielarebelo9194]

The links to the music are in the description box, Edwin makes it

[@36voltsson54]

NO!!!

[@LandyXB]

@@VasilyYt Yeah Edwin, just make a new song every single video...

[@stevedixon2630]

kzbin.info/www/bejne/kH-wmqGqmKqppac this is my favorite

[@Mr.clintontoney]

IVE BEEN WAITING ALL WEEK FOR THIS VIDEO!!!

[@GrindHardPlumbingCo]

We will try and post 2 next week

[@Mr.clintontoney]

Grind Hard Plumbing Co 🤘🏻🤘🏻🤘🏻🙏🏻🙏🏻🙏🏻 AWESOME!!!! I freakin love this channel!!

[@D3LTRON92]

Actually punching holes in those flanges can reduce the amount of stress in the part. These are used when the prats are odd shapes and have sharp angles! So you might have actually made it stronger!

[@thecannabiskidfortier6219]

That song at 7 mins and 44 seconds was featured in one of my favorite video games. Adventure beetle racing for Nintendo 64.

[@bigtopmedia]

7:44

[@GrindHardPlumbingCo]

It's such a good game. I had some fun with the tune here kzbin.info/www/bejne/kH-wmqGqmKqppac

[@dylanbell4516]

Watching your content from Australia 🇦🇺, Keep up the awesome builds been watching since the barbie car build 🤘

[@ThinkHarder]

Nothing beat like body part as a temporary work bench, what could possibly go wrong,, btw , you sir are a technical engineer because you actually apply in real life what you imagine in your head, like me, cheers a huge A++ for this entire project and the barbie jeep

[@93xcr440]

Hell yeah brother that thing is going to be awesome love the builds and the filming you guys are bleeping sweet I've been wanting to get a t-shirt but funds are tight I have a couple projects I'm working on myself love it guys keep up the great work

[@GrindHardPlumbingCo]

Well thanks for watching! And if the funds are tight we would definitely way rather you put your money towards your builds!

[@killakwik]

Now doing the Red Means Recording stuff over here too. Love it.

[@GrindHardPlumbingCo]

Oh yeah it makes everything better!

[@ryanmenke9554]

This is how real artist get things done! We can win, Revolution!

[@lex2715]

I love this episode, just watching and learning. I am building my first go kart, and I have learned that it cost a lot😧. So its a little bit going slowly but I am trying. I just Learn a lot from your video's. Thx

[@GrindHardPlumbingCo]

Yes we noticed the same thing. a lot of the parts individually are cheap but they really add up quick when you start putting them together. But it's so much fun and so worth it

[@jastark22181]

Another great video! I REALLY can't wait til this one is done... This project is one that I have always wanted to do!

[@MarkCarr331]

you guys are very smart engineers/fabricators even if its all for fun... epic channel

[@GrindHardPlumbingCo]

Thanks!

[@theirishaxe9405]

This is gonna be awesome 👍👍 some of my best memories as a kid was getting to ride my cousins Odyssey and pilot

[@johnsmithfakename8422]

I would like to see a modern Honda Pilot/Odyssey, this is why I like watching honda FL250/FL350/FL400 builds. Good work and good luck. I personally would have liked to see a honda CB500 engine in the honda Odyssey ... but that engine is around 50 HP.

[@RVCrazy]

Mike's golf cart is badass. I was thinking about offering to race you guys with my 1000cc golf cart but my suspension is from a Banshee and it would be the hindering factor for sure. My golf cart is an old metal ez-go with a 2004 cbr1000rr engine in it. Saw it on craigslist and knew I needed to go get it and fix it up. I was planning on building the long travel setup this summer but life started changing and I'm moving so it's going to get stored with a friend for now.

[@travishurt3796]

Nice I have a similar setup but with a Honda cbr 900 it's wicked fast has the 6 speed . No reverse is its downfall . I'm ashamed to say mines bought not built by me . You are inspiring though ! Got a new subscriber here in central Oregon !

[@GrindHardPlumbingCo]

Hey at the end of the day if you use and enjoy your toys that's all that matters right! Thanks for watching!

[@shifty1927]

damn that adapter is awesome. better than machining the secondary for the sled belt

[@ROTAXD]

stephen s machining the driven clutch (socondary) would have been useless with that much torque & hp going through it. The helix would likely shatter & there’s no spring (either honda oe or aftermarket) that would work well. As soon as the drive clutch enguaged, the driven would open/shift out. With the polaris setup, they can play with custom/multi angle helixes & different springs to get the shift point where they want it & keep the motor in the powerband.

[@shifty1927]

@@ROTAXD I've machined about 6 for my 670ho swaps (guessing by the name u know what that is) . if u go by what power level parts are supposed to hold then the fnr trans is useless too. lol years beating on both.

[@MattySlice21]

@@shifty1927 run the stock secondary on my pilot with a 700 swap. No issues yet!

[@shifty1927]

@@MattySlice21 I feel like the trans or axles are going to go b4 the secondary . also not going hard on pavement and most importantly letting off mid air. my cousin broke his trans case right in half from staying full throttle on a jump. lesson learned cause them gear boxes were hard to find in like 2011 2012ish can't imagine now.

[@MattySlice21]

@@shifty1927 yeah the oddeyseys don't have that slipper clutch like the pilots do. I beat the hell out of mine and haven't had issues. But this build they have going makes more or equal power to my 700. I feel like they might explode that transmission. I hope not though!

[@marielarebelo9194]

Amazing video! So entertaining. Good job, guys! Getting better by the minute

[@GrindHardPlumbingCo]

Thanks girl

[@rammatic7881]

Roses are red Violets are blue I'm on the notification squad How about you?

[@nap8187]

Rammatic ye

[@anonymousperson4280]

Nah cause KZbin doesn’t flipping notify me when they post and it’s annoying

[@GrindHardPlumbingCo]

I wish we could pin two comments...

[@matthewevers9442]

Absolutely, I am waiting for this video each friday!!

[@Psycoticjim]

Yes always n forever

[@quinstickman]

I really enjoy these cool builds. Your fabrication work is amazing.

[@danmcelroy6584]

Sweet she's almost done! I can hardly wait to see her run!

[@tazyt3388]

Oooh getting close now guys guna be a monster can't wait keep at it cheers

[@nate32185]

Awesome video you guys! Great shots and editing. And of coarse that fl800 is awesome. It’s going to be stupid fast. Best of luck. Be safe.

[@b.d.b.d]

Good job man. You r building every 90s kids dream. Please make it work. In 1989 I asked my parents for a 350 just like that one and they bought me the plastic battery powered version, power Wheels I think. It was the worst Christmas of my life, literally heart broken to find some plastic piece of shit in the garage Christmas morning. It absolutely destroyed me to have to choke it up and tell my parents how cool it was but at heart I was screaming ( u bastards, how could u do this to me.) I'm over 40 now and still I will never forgive them for that.... I hope your rips and u have tons of fun...

[@rc.obsession8207]

Been here since 3K

[@tracerichmond7203]

That Subaru beat needs some love! It would be awesome to see it running laps as an all wheel drive rally monster.

[@14mirage]

That music... it’s wonderful!

[@fareedbarakat4663]

That's hard that work got you a new subscriber!!

[@GrindHardPlumbingCo]

Thanks! We won't disappoint!

[@shawnpecor862]

Grind hard plumbing Make that 2 new subscribers I really enjoy the projects u build keep at it if u ever get a minute and u can message me I would love to talk over an awesome project that if we could mass produced talking bout making millions I always wanted to build it but then I got in an accident hit by a semi while riding with my ex girlfriend so that projects over for now sorry so long

[@kingofkings2385]

this thing is sweet!! I had a Honda odyssey years ago but when I bought it the guy swapped the motor out with a motor from a concrete saw lol... not sure what he was thinking there

[@boatscrypto5856]

Dopppppeeeee. Keep killing it. The kart looks sick

[@narxic]

Awesome video, love the all details your adding about the build. Great tip for the breaks. Thanx for the explication and thought process, what didn’t work so I know what not to try, and the unconventional fix. Subscribed.

[@GrindHardPlumbingCo]

Thanks! When I edit I try to tell the full story just for that reason. And I really think Ethan's problem solving process is cool so I like to keep in as much as possible without getting boring. -Edwin

[@MASTERoQUADEMAN]

90s kid here! Shoutin back!

[@jorgevalverdequiros6566]

I love that the videos are more longer❤

[@randyschock7374]

This is awesome. I just blew up the motor in my oddesey. Can't wait to find another motor for it.

[@chrishorbatt3504]

Clever how you freed up the master cylinder. I worry about that trans surviving with that clutch so far out there maybe the adaptor shaft should have been longer and you could have had a support bearing outside end of the clutch

[@jaymugridge1810]

Always thought the odyssey and pilot would have sold better if they were two seaters instead of single. Honda was ahead of there time on these .

[@robsorgdrager8477]

And then they turned em into stew-pid people movers .

[@grahampotter5095]

This build is the most epic by far.... that 800 two smoke is gonna wail !

[@tebeardenkahboom1]

Just a little FYI guys I am betting that pull rope is going to be cutting a Groove into that plastic tank. Every time you pull on that rope it's going to cut into that plastic tank and next thing you know you're going to have a hole in it keep an eye on it the best thing that I could think you could do is get a piece of sheet metal and wrap it around that plastic tank and make sure that it is a smooth transition around that corner because then it will start cutting into your rope and it will cut the rope. I think you got enough common sense to know what I'm talkin about. Looking good guys can't wait to see that thing scream. And yes you are one of my favorite channels out of all of them you build the most badass!!!

[@davee6161]

I absolutely love your builds, I wish I had a quarter of your talent.

[@millboss1372]

Great video gentlemen.. love watching your builds.

[@browndog9402]

looks awesome guys, coming along very nice. cant what to see it ripping around.

[@jordanmowday]

Freaking genius freeing up the seized pistons like that

[@GrindHardPlumbingCo]

Thanks man! It was a moment of inspiration for sure!

[@h.r.puffnstuff8705]

Anyone here old enough to recall Mickey Thompson SCORE OFFROAD. They had a class for Odysses and that morphed into custom frames and outlaw engines. It got crazy towards the end. Many of the custom frames live on in Australia today.

[@rnl9520]

Love watching your projects! I am going to say it again this week - You guys need to build a badass tank like tracked vehicle!

[@GrindHardPlumbingCo]

Thanks man! We’ve actually talked about a tracked vehicle!

[@thatbikekid6410]

When u get those new rims and tires stud the old ones

[@wheelman5600]

I'm going to say music reference to N64 game is Adventure Beetle racing I used to play the Daylights out of this game lmao

[@MrTuttman]

I learn something new every time I watch the video, awesome job guys

[@daveshively3295]

Your builds are awsome! That Odesey is gonna be hella fun! Allready is.

[@donniefish6362]

You guys have all the great toys love watching your video keep up the good work👍👍

[@GrindHardPlumbingCo]

Thanks man! Really appreciate it!

[@coolhanddruid]

Nice idea on using the hydraulics to free the pistons. Not sure if I would have came up with that one myself.

[@rammatic7881]

You can also use a master cylinder to unclog and clean brake lines

[@FairlaneFox]

yeah i recognized the beetle adventure racing announcer too, lol. nostalgia is real. just recently found this channel though, really good content guys. so you made the music? even the one that starts at 5:55? pretty dope. i could work in the shop to that one at 5:55.

[@toddbertram6556]

Why not create a mount on the outside of the pully with a recessed bearing to support it at its weakest point? Yes the mount would need to be quick release for belt changes but would be much stronger. Either way, keep on building, always fun to watch you guys hack things together. May be time to grab up a mill and lathe boys so you can do work. How could you desecrate the Brat? That's the build you guys need to do.

[@nathanwilson6670]

I think there's a place for the Ethan cam where it can support a specific activity. It just seemed a bit much this time. I was getting motion sickness

[@user-neo71665]

That damn moto mule gets around, lol. Good work Mike I been following your build thread since the start.

[@davidespinosa3372]

Dude yes "beetle adventure racing" dude. The snowy👽 ship level and buggy was my fav. I look forward to your vids. Keep up the good work!

[@GrindHardPlumbingCo]

It's a blast!

[@justinlyons5159]

Man dude is really smart good idea with the stuck master cylinder

[@joenels4356]

might wanna beef up that support bearing mount theres alot of forces and pressure on it id say eh?

[@themrkeebler2]

3 . 2. 1. Go! Fusion Frenzy!!!

[@jonaathansimons7938]

With all the attention to detail, I sure hope you're gonna fix the backwards directional tire on the left hand side!!

[@Timmy.clevenger]

No such thing as scrap metal at grind hard 👌🏼

[@stormscustoms2578]

That new pov is awesome, love the vids

[@matthewschultz8462]

impressive videography, pro level work

[@deangelolawson6184]

Looking forward to y'all future endeavors

[@brianj123458]

Cant wait to see this bad boy up and running

[@Aussie_Aaron]

Love the work guys excited to see it run and drive

[@EvanMoon]

I’m getting pumped for the awesome music... 7:40 I find it