HOMEMADE MAGNETO CHARGER

[@Engineguy66]

I was told by a old timer to charge the magnet on the mag. He sed it makes a big difference in the charge. Any time u pull the magnet or Armature out it can lose magnesium he sed to always do them as a whole unit when you can. He use to work on these 80 years ago

[@justinhill376]

Seems like that would be a good experiment/video. Magnets on vs off

[@1crazynordlander]

That is a strong electromagnet! Every time you energized it my hair stood on edge clear over here in SW Minnesota!

[@805ROADKING]

Lol!! Now that's Strong!!☺

[@MrGhostVortex]

This is a tool that should just be passed around form shop to shop. Its rarely ever used but when its needed its really needed.

[@wayneriedlinger]

Good job guys. I made one years ago for the mag off an oilpull tractor. it was pretty much the same as yours.I charged the magnets enough that I used it for years before they needed recharging again.

[@805ROADKING]

+wayneriedlinger Thanks Bud!!☺

[@حسندياب-ل8ب]

صديقي هل تستطيع ان تشرح لي بفديو كيفية صنع هذه الالة لاني احتاجها فعلا

[@MichaelSartore]

Fantastic video guys. Can you make a vid illustrating how you made it?

[@shawnmrfixitlee6478]

Such a simple little rig .. But it sure makes a big diff in the magnets strength !!

[@805ROADKING]

Yeah if copper wasn't so expensive we would have built one years ago!!☺

[@derliferreira]

I just love this pair, don't know exactly why but I do.

[@franciscogalindo2454]

Hey Man, very good job...... how is the coils specs?

[@phill903]

Interesting video, Mike is a smart guy.

[@805ROADKING]

Yeah he's pretty Sharp!!☺

[@roncarreon8967]

Can you make a video on how you made this magnetizer. Thank you

[@paulg444]

actually a bigger battery wouldnt change much. The current I= 12V/R where R is proportional to the length of the wire windings. That battery is plenty. Probably should add a capacitor to that system.

[@davidsall5917]

How did you wire the N & S Poles together? Can you send me a Chart of how its wired? Im kinda tired of the Over priced Magneto guys charging me to charge a Magnet on my Tractors or Engine Magnetos.

[@mikeobryan8368]

How many turns on each coil? Do you remember?

[@BAGOTCORNER]

I’ve made one that I will make a public video for by spring . It costs less than $20 and takes less than 1 min to build . It will charge the magnet to almost dbl the Tesla these were charged to from the factory .

[@Justmyopinionlol]

I want to build one just to test if I have any alien implants inside my body.

[@not2fast4u2c]

That was some cool stuff to see !!!

[@805ROADKING]

Yeah Buddy!!☺

[@99carnot]

I know electricity makes magnetism, and magnetism makes electricity. I don't know why, but this is a great demonstration of it! Liked a lot:)

[@805ROADKING]

It's like being back in grade school making little electro magnets eh!!☺

[@thesmallenginekid]

Im no expert but this is my understanding. The magnetic field lines induce a current in the coils by pushing/pulling the electrons in the wires. Magnetizer is basically the opposite, using field created around the coils with electricity the rearrange/polarize the electrons in the rotor.

[@imwhatim7259]

You can use a portable welding machine to power up at higher amps

[@JLHahn]

Do you have a parts list and direction to share?

[@turbocobra]

Cool vid... that Mike is a sharp fellow!

[@805ROADKING]

Yeah Buddy!!☺

[@lillybeanincworkflow9360]

Great video I like your set up

[@SlyvanusAcho-ns6dq]

Your demonstration is clear and real but how can I get my own cherger

[@eillohtims5132]

I could be being silly but I am sure than magnets come off charged at opposite poles to the electric field. So you need to place your magnet at opposite poles, not like poles. I could be wrong but I don't think I am, I believe that's why it appeared as if it didn't work

[@aspensulphate]

That is what he did. Did you see when he suspended the magnet above the charger poles with the string? The North pole of the suspended magnet seeks the South pole of the charger, and vice versa. North to South, and South to North.

[@TheGrissomCat]

leave it up to mike and his maddd inventions

[@805ROADKING]

Yeah ya never know what your gonna see eh!!☺

[@Mopardude]

You guys always have something interesting going on!

[@805ROADKING]

Yeah we try to stay busy!!☺

[@mustie1]

that things going to pull a satillitte out of orbit,,

[@805ROADKING]

We gotta be careful around pacemakers, That thing will rip it right outta ya chest!!☺

[@diesalweasel]

+805ROADKING pmsl just see it now lol

[@brianhilligoss]

That's a big magnet zapper. I have a little tiny one to zap rc car motor magnets. I use a brass hammer to tap them.

[@805ROADKING]

That's cool!!☺

[@coolrides]

Cool to see the result of the windings video! :) Jack

[@805ROADKING]

He's winding a coil for the Bessemer he's working on now!! I think he said it has 60K turns, aye yi yi!!☺

[@KrisKustomPaint]

Thanks for sharing this.

[@safourgardpa5459]

Where'd you guys get that magnet clamp at the end there?

[@udizzy1969]

I seen it, I seen it, I seen the light, lol cheers guys

[@805ROADKING]

I'm glad someone seen it!!☺

[@ziggassedup]

Good stuff.

[@805ROADKING]

Thanks Mate!!☺

[@500passwords]

so this is where the x-men's arch nemesis magneto gains his power ? damn you mike , wolverines coming for you

[@deutz68]

Nice work...how are the cables connected,its hard to se on the backside..

[@805ROADKING]

On the charger they are soldered to the post under the windings and at the battery they are just held in place by hand when charging!!☺

[@Cheekyboyspeedruns]

does this thing produce permanent magnets?

[@RamblinAround]

That's really cool.

[@805ROADKING]

Yeah we should have made one years ago!!☺

[@davidabraham3873]

alright thanks do you think it is possible for me to make a 4 cylinder engine for my lifted lawn mower with a vertical shaft thanks

[@500passwords]

and now all your guys credit cards don't work . lol

[@805ROADKING]

Lol!! I didn't even think of that!! Luckily we didn't have any with us eh!!☺

[@eloquentpixellawl7841]

see how much stronger a neodymium magnet would get

[@جلالمصلحعليعلي]

هل يمكننا صهر قطع النيوديميوم وصنع قطعه كبيره

[@1shanimehar1238]

Dear i am interested and making megnet can you help me making how to megnet charge maker

[@rammahsss]

is it going to work if you heat it while CHARGING it ??

[@killybing1]

Dear 805ROADKING I like the simplicity because I'm not technically minded the music wasn't bad but i would have used Sound tracks by Soft Cell or Kraftwork ;) on a serious note can you look at Michael Chapala on you tube under Morgellons he claims to have built a magnetic pulser machine that will take these nano fibres from my skin , I have Morgellons I'm not going to go into detail because I begin to start sounding crazy so I need to know if you can make one of his machines I can't afford the money hes asking & I'm intrigued to know exactly how it works thank you for your time. God bless

[@raymays7030]

Now we all have single wall nanu tubes

[@bldcindiaforindia]

Bro how to make a charger for neodymium magnets?

[@ligebellbuckletn]

Good stuff,,,, watching in middle Tennessee ,,, Start it up? :-)

[@805ROADKING]

Thanks Bud!!☺

[@davidabraham3873]

hey road king do you mind kind of showing or telling me how that is wired up and was made thanks

[@805ROADKING]

We didn't make any videos of building that thing but it is wired up just like the electro magnets everybody makes in grade school just a whole lot bigger!!☺

[@fishbake7]

Are the coils in series? or parral? Are they both in the same phase?

[@killybing1]

Jon Fisher please watch Michael Chapala on you tube under Morgellons cure he has a machine called a magnetic pulser machine that will take these nano fibres from my body I can't go into detail because I begin to start sounding crazy so I need to know what that machine is he's using and how it would possibly work ? Thanks in advance William

[@AzamKhan-ge3cn]

How I made this machine

[@wmonger]

Ahhhhhh forget about it.

[@1944johndeerel]

we have a BIG one of these I think it must weigh 100lbs or better my grandpa made it and it really works well

[@805ROADKING]

Yeah this one is pretty hefty too, not quite 100lbs though!!☺

[@1944johndeerel]

copper is heavy when wound that tight lol.

[@stefvdiepen]

If you heat that magnet real hot and than energise it til it has cooled down it will be much stronger, that's how super magnets are made

[@805ROADKING]

I don't think I'd want to experiment with a $400 Magneto!! I've never heard of anybody else do it like that!!☺

[@brianhilligoss]

Super mags come out of the earth that way. Hence the name rare earth. Heat kills them.

[@killybing1]

brian hilligoss please watch Michael Chapala on you tube under Morgellons cure he has a machine called a magnetic pulser machine that will take these nano fibres from my body I can't go into detail because I begin to start sounding crazy so I need to know what that machine is he's using and how it would possibly work ? Thanks in advance William

[@killybing1]

Stef Van Diepen please watch Michael Chapala on you tube under Morgellons cure he has a machine called a magnetic pulser machine that will take these nano fibres from my body I can't go into detail because I begin to start sounding crazy so I need to know what that machine is he's using and how it would possibly work ? Thanks in advance William

[@MichaelSartore]

Bill King research kundalini awakening symptoms

[@creamofcardstv]

That's a pretty useful gadget

[@805ROADKING]

Yeah we'll get alotta use outta it!!☺

[@-M.C.--]

Looks good buddy :)

[@805ROADKING]

Thanks Mate!!☺

[@polkiju7]

Turn the lights off to see the spark

[@homotorsports]

I saw something…But the government said it was "Swamp Gas"

[@805ROADKING]

As long as it wasn't Swamp Ass you saw we're OK!!☺

[@BrittanyNicole1990]

neat stuff right there

[@805ROADKING]

Yeah Buddy!!☺

[@SamratSinh-wd6kn]

Make a video on how made super electronic magnet

[@1974UTuber]

Just wondering if you have ever tried replacing the horseshoe magnet with a neodymium magnets to see if it makes a hotter spark? Or does the magneto rely on having the curved metal shape in there?

[@805ROADKING]

I've tried it unsuccessfully but I think I must have been doing something wrong because I've seen it done with the Maytags before!!☺

[@maheshkumardevipujakgujrat7395]

How to make a permanent magnant charger

[@Jan46]

Nice!

[@2-stroke748]

2:38

[@mirodeogrl]

lol I bet ya my boys would have alot of fun (aka trouble) with a few magnets.

[@805ROADKING]

Lol! Yeah they would love this one!!☺

[@starpuss]

That sure looks a lot cheaper then sending it out lol!

[@805ROADKING]

We get them done for free but we have to wait for an engine show!! This way we can do it when we want!!☺

[@MichaelSartore]

What do you mean by sending it out? To a foundry to have it charged?

[@sojournsojourntraveler1203]

Why doesn't anyone show how to wire up the magnets to achieve the desired polarity ?

[@iridios6127]

Is not a rocket science. Most of the human can figure it out, by using basic physics and Wiki.

[@sojournsojourntraveler1203]

@@iridios6127 Well ain't we special. Some time it is just necessary to re-magnetize a coil on a old pony engine and are not making youtube videos to demonstrate how smart we are. Thanks for the curse.

[@sojournsojourntraveler1203]

@@iridios6127 Do you know how to inoculate a culture in a PDA mixture. I do and I could say it is not rocket science. Point is it's a specific arena you are failure with that others may not be. So please don't be rude and just answer when you. Shalom

[@iridios6127]

@@sojournsojourntraveler1203 These things are taught around 6-7 years from the beginning of school edu. ? If not - it is not comparable with base physics.

[@sojournsojourntraveler1203]

So its so basic describe it in detail now. Please Or you just enjoying being abusive ? Thank you

[@EmilyTienne]

Instead of using a lawn mower battery, why not just plug it into the wall?

[@joostderidder]

just a little tip here ... do not put the magnet on a piece of iron directly after "recharging" it. You'll loose a tad of the re-formatted magnetism. But excellent job anyway !!! Thanks for this excellent idea and vid!

[@paradiseroad6405]

...speed has to synchronize with the camera... ...right speed the camera will see all the sparks... ...change the speed and it won't see any...

[@crackafilliacs1]

Called the skin effect

[@41Zman]

been looking at making one but the cost of wire is insane.

[@805ROADKING]

Yeah even if you can find them used they're still too expensive!!☺

[@41Zman]

805ROADKING darn right. or too heavy to ship

[@randallmarsh446]

can you heat the item being magnetized and get better results besides tapping on the object being magnetized?

[@killybing1]

please watch Michael Chapala on you tube under Morgellons cure he has a machine called a magnetic pulser machine that will take these nano fibres from my body I can't go into detail because I begin to start sounding crazy so I need to know what that machine is he's using and how it would possibly work ? Thanks in advance William

[@231flash]

Put your tongue on it , you'll "see" it..

[@805ROADKING]

That'll work!!☺

[@a.a.apanchal2587]

Nice

[@devilswish8876]

its not the mather how strong the magnetism is its a mather that you can and are abel to magnetise any thing out of steal and other metas the use of it is by creation of a multi pole piece of diferent shapes used mainly for ac generators ore motors ore dc motor/generator just like the good old magneto power out of any thing simply that can spin thats what peopel are after the free rate of spining objects that are normaly not used at all so any cinde of movement can by turned from wasted to usabel work simply and logicaly and that "any thing" you want only by that litel info is enough reason to use that old tehnology!!!

[@AzamKhan-ge3cn]

Please let me know I need this

[@dennipramukti6732]

Scematic sir......