88-98 Chevy/GMC instrument pannel led install

[@ShannonLooper]

Someone needs to make a kit. The big illumination LEDs with new screw bases (if needed) and all the smaller warning lights with new screw bases. Great video!

[@BryanJohnson81]

That would be nice if you could get a kit!

[@Wildweston214]

subscribed.. watched some of your off-road vids. im from montrose so its nice to see the valley get some love

[@BryanJohnson81]

Right on man. Would you know if there are any trails out your way that are rated 3-5? The ones I know of are 6-10. My big ole truck won't make it through without getting tore up.

[@Wildweston214]

Bryan Johnson there is definitely some gnarly trails out here. look up hwy90 rim road on google maps. it has some bad spots but its perfect for my little f150. honestly theres a mountain southeast of montrose called buckhorn.. bit of a rough ride in a stock truck but the views are breath taking.

[@BryanJohnson81]

DiRtYJew214 cool, thanks man. I'm looking for new places to go wheeling. I'll definitely check em out.

[@OblivioniX17]

Thumbs up simply for the antique Ipod Shuffle touch 😂 we've come a long way!

[@Bearason]

Great video I was looking for a tip on why my LEDs aren't working, I'm going to try putting them in the other way! Thanks. Hope this works they weren't cheap!

[@BryanJohnson81]

Sometimes you do have to turn them back just a little bit. It is possible they aren’t making good contact at full lock.

[@kyle51895]

So if I buy the 194 LED bulbs, do I take the black plastic twist piece off the original bulbs and plug in the LED where the original bulb was?

[@BryanJohnson81]

That is correct

[@kyle51895]

@@BryanJohnson81 awesome, thanks man for the quick response!! I greatly appreciate it. Got a 93 Chevy sportside from my dad to restore

[@tyaz2528]

You get better results if you peel the green film from behind the the indicators. Under the green film is must clear plastic, so you’ll have more of a vivid blue coming through. To do it, you’ll have to take the cluster apart to get to it.

[@Justin-mp7zh]

they are solid plastic green pieces behind each separate compartmented instrument panel gauge not a plastic film you can peel off

[@irishuwould5185]

Way too much trouble for not any noticeable difference

[@NCboy4Life]

Is there a video that shows how to do this? Mine is still green from changin them to white

[@ShannonLooper]

My 94 Burb has an intermittent 'no spark no gas' problem. I tried to read the codes and the CHECK ENGINE bulb was burnt out. I had a few read and blue T10 (194) LED bulbs so after watching this I pulled the dash. Then I realized I need the smaller 74/T5 bulbs. Also, on mine the bulbs do not come out of the twist sockets. So I ordered T5 LEDs and both size sockets from Amazon. I had to install and then rotate a few times to get the polarity right. The right turn indicator evidently pulled too much current and burnt the circuit. I ended up soldering a wire in to fix it. I got all the warning lights working eventually. The T10 illumination LEDs that I got made tiny spots on the dash instead of the light spreading out across the gages. I ended up leaving the stock PC194 bulbs.

[@BryanJohnson81]

Wow! Sounds like that has been one big pain in the butt!

[@williamogden5583]

Don’t really get why but mainly only the needles are lighting up. All of them are on but they aren’t penetrating to see them through the numbers but they look very bright everywhere else. Should I take it apart and take of the film inside the cluster?

[@BryanJohnson81]

I don’t think I’d take the film off but I’d definitely take it back out to see if they aren’t sitting in their holes right

[@timothydollar1274]

Where can I order these? I also saw you video about the climate control lights. I'm needing to get these as well. All help appreciated.

[@BryanJohnson81]

You can get them from Amazon or eBay

[@videobyallen]

besides the 6 bulbs you replaced, were all the other lights T10 (aka 194) bulbs? Like the ones for all the brake, engine, battery, turn sig, high beam, etc. Or were they smaller T5 (aka 74) bulbs? And do you know if you could have used the stock - twist lock - bulb holders? Or were the stock bulbs glued into the holders so you had to use the new holders?

[@BryanJohnson81]

All the other bulbs are t5. I tried getting the bulbs out of the stock sockets but for whatever reason they were a real pain in the ass to get out so I just bought the LED’s and sockets.

[@GeekBoy03]

@@BryanJohnson81 With everyone asking what bulbs, and where to get them, you should be posting referral links so you get a small commission for sales. Like Amazon for example. does that

[@BryanJohnson81]

Oh yeah?! I didn’t know they did that. I’ll have to look in to that. Thanks!

[@GeekBoy03]

@@BryanJohnson81 Right here affiliate-program.amazon.com/

[@jermainegrayson663]

I😮 really want to do this to my 94 GMC suburban 1500 one day 😊

[@BryanJohnson81]

You should! It’s a cool “upgrade” but totally unnecessary lol!!

[@edsog]

From what I can find out, T10 is 1/2 wide at the base, T5 is 12mm, T4 is 10mm, and T3 is 8mm wide.

[@StephenIbendahl]

How many bulbs are in the 4x4 shifter and what kind of bulbs?

[@BryanJohnson81]

There are two and they are 194

[@howlingwolf125y]

Bryan.. Thanks for the video.. Great info. I had a problem with my 1992 Silverado yesterday. I was driving with the headlights on and noticed a small amount of smoke rising from the left top part of the dash.. Next thing I noticed the headlights flickered and then went out. All other lights are working (dome, parking, blinker, brakes).. The Just wonder if you had a clue or guess what the problem could be. thanks so much.

[@BryanJohnson81]

That’s not good! Did you blow the headlight fuse? I’m not sure exactly what the problem is but you might have a wire grounding out somewhere

[@howlingwolf125y]

@@BryanJohnson81 Thank you Bryan.. I will check the headlight fuse and hope that replacing that is the problem.. The wire grounding problem might not be as easy to fix. If you think of anything else, let me know. Thanks again for your help. I hope someday I can return the favor.

[@BryanJohnson81]

If it is a bad wire that’s not gonna be much of a fun one to track down. I hope it’s an easy fix!

[@howlingwolf125y]

@@BryanJohnson81 I will start with the fuse.. If its not that, I have to check the wires.. It is a shame. My truck is build like a tank .. and I have had only very minor problems with it for the past 20 years. Thanks again and may Jesus alway be with you!!

[@BryanJohnson81]

I hope you can find the problem and it lasts many more years for you!

[@TheProjectGuy04]

Aren't those t10 lights for the black ones to change the dash light?????

[@BryanJohnson81]

Yes

[@TheProjectGuy04]

@@BryanJohnson81 Thank you

[@gustavojuarez6088]

I have a 94 Silverado and only my needle pointers and my gear box light up, I’ve tried to turn them…but it does not seem to work lighting up the rest of my gauge

[@BryanJohnson81]

It’s either a bad connection or bad bulb. Try new bulbs and see what happens

[@Atuzzo]

I just purchased a 89 C1500 with a standard transmission, but it has the old moon cluster with no tachometer. Are these new clusters with the tachometer a plug and play option? Or is there more to the process in order to fit the cluster and get the tachometer working?

[@BryanJohnson81]

If you are wanting to swap clusters the wiring is different. The shift indicator is also different on all three year separations

[@beauwilson3563]

I was just wondering where you got your led lights from and what kind are they. I have a ‘92 full-size blazer and am wanting to do this to my gauge cluster

[@BryanJohnson81]

I bought them off of eBay. They are 8 smd LEDs

[@DJmemo20]

Quick question. How did you change the yellow pointer to a blue pointer one ?

[@BryanJohnson81]

I’ve been meaning to do a how to video on how to do that. I’ll get around to it soon hopefully. There is a little process to doing it. First thing, with the engine cool, turn the key on and take a picture of the needle positions. Take the trim piece off, then the clear face, and then pry the needles straight up with a fork or something similar. Turn the key back on and put the new needles on in the same position as in the picture. Don’t put the clear face on yet. You might need to do some adjusting. Take it for a drive and make sure everything reads right. Once everything is good then you can put it all back together. Hope that helped. 👍🏼

[@GeekBoy03]

@@BryanJohnson81 We still waiting on the video

[@BryanJohnson81]

@@GeekBoy03 I’ve sold the truck and never did get around to doing the video 😕

[@GeekBoy03]

@@BryanJohnson81 "come on man!" You killing us. Maybe at least put in the description which ones you suggest for that. Thanks. By the way, how much did it sell for?

[@BryanJohnson81]

@@GeekBoy03 I sold it for 2,800 bucks

[@lastkingof9971]

Will that instrument cluster work in my 89 GMC Sierra c1500

[@BryanJohnson81]

I don’t think it will. You’d have to change the plugs

[@lastkingof9971]

Bryan Johnson ok thanks for the reply my man

[@INTERNATIONAL_RDF-D]

I have a 91 with the old 180* dial cluster Instead of the needle style Love it actually. Buuuuut my truck never had the head unit in it. Only a delco tuner in the dash. It had three seperate plugs into it. Instead of one consolidated harness plug Any idea on a wiring harnes that will just plug into these existing connectors for an after market stereo....

[@BryanJohnson81]

Hmm. That's interesting. I've never seen or heard of them having 3 plugs. I'd have to research that.

[@LobbsTrucking]

I have a 92 gmc and have a different cluster. The one with the white roll up bars if that makes sense. Same layout? And can I change the climate control lights to blue too?

[@BryanJohnson81]

kzbin.info/www/bejne/f53YmIhpnJhonLs Here’s a link to your cluster. You can change your climate control too. I have a video on how that’s done also

[@allentownsend8804]

How did you get the radio unit out my is stuck and won’t come out and has screw in the bottom attaching it to some bracket?

[@BryanJohnson81]

It’s been so long since I did it but I’m pretty sure there were just 4 screws holding it in is all.

[@22bigstew]

Did you have to the bulb sockets when switching to the LEDs?

[@BryanJohnson81]

I could have re used the sockets but I bought bulbs with sockets too

[@22bigstew]

Bryan Johnson I ran into an issue with the bulb in my original sockets not working. Having to return the lights and going to get the ones with the sockets. Thank you for the help

[@BryanJohnson81]

glad I could help

[@22bigstew]

Bryan Johnson I forgot to ask, where did you purchase you bulbs that came with the sockets and the brand?

[@BryanJohnson81]

I found them on eBay. They were cheap ones so I don’t think they had any particular brand name

[@84montecarlo]

I did this in my 96 then sodered the pwr window and lock buttons air bag and cargo light and head light switch was t5 along with HVAC control I should make a vid If u want to see let me know looks great . Good job!

[@BryanJohnson81]

That’s cool, I’d like to see that. I didn’t go that far with mine. Just the cluster and hvac controls

[@GeekBoy03]

Where is the video?

[@adrianm357]

Ok I was making sure because I have a 94 Chevy Silverado c1500 and I was thinking about doing the same thing but making the range selector green but it doesn’tSound like I can correct?

[@BryanJohnson81]

If I remember right that is correct.

[@LobbsTrucking]

Hey Mr. Bryan! I was trying to install my blue leds I have the early 92 with the 180 roll up. Mine definitely didn’t come out as easy as yours? Should it have more slack? I am just worried I don’t wanna snap my shift wire. Thsnks

[@BryanJohnson81]

They are a little tight. You have to twist them around to get em out

[@LobbsTrucking]

Bryan Johnson twist them around? Oh boy

[@BryanJohnson81]

Yeah, you have to pull it out just a bit and turn the cluster around the steering column

[@LobbsTrucking]

Bryan Johnson ok thanks. I gotta try getting it out first lol it barley moves

[@ShotCallen23]

Hey man can you give me the exact link to what you had bought for the twist lock

[@BryanJohnson81]

anthony Montoya I bought the LED's with the twist locks already on them. I got them from eBay. Search for T10 led dash light and a bunch will come up.

[@Dixonyass-g8v]

Bryan Johnson will that gauge cluster work in my 89 GMC Sierra (just plug and play?)

[@irishuwould5185]

@@Dixonyass-g8v no, connector/wiring is different

[@djbismyid]

Hey Bryan, just curious I have a 1993 Chevy C1500 Cheyenne and was wondering if these led's would work for me in my truck, and if you know how long do these Led's last? And are the t10 twist locks what I need for my truck? Thank you..

[@BryanJohnson81]

They will work in your truck also. Don’t cheap out on them though. It’s one of those things that you get what you pay for. Good LED’s will last as long or longer than regular bulbs. When you order them get the T10 with 1/2” sockets.

[@djbismyid]

What is the standard wattage bulb, and whats the best wattage led to get. Also I notice that there are 2 different size types of twist locks is the 1/2" the big ones, and what size are the smaller ones that are the blinkers, parking brake ect? Thank you very much for taking the time to answer my questions.

[@BryanJohnson81]

They are 12v. The bigger ones are 1/2” T10 and the others are T5 bulbs.

[@kenpina1073]

What size bulb is underneath dash???? The led conversation size

[@BryanJohnson81]

If I remember right those are 194

[@edwardhenson]

Thanks needed this!

[@BryanJohnson81]

👍🏼 If you have any questions just ask. Check out my other videos. I put LED's in the climate control too.

[@edwardhenson]

Bryan Johnson just to make sure, the t5 bulb was used for the climate control?

[@BryanJohnson81]

Right. They are too small for the dash

[@luismora2266]

Hey any chance you know the bulb size for all the indicators such as turn signals high beams etc. Do you know how many are needed?

[@BryanJohnson81]

I couldn’t tell you how many are needed but they are T5

[@luismora2266]

@@BryanJohnson81 okay thanks for answering ordering mines right now👍

[@adrianm357]

Brian how many did you but? 6 for the games and one little one for the year selector?

[@BryanJohnson81]

I bought a set of 10 but only used 6. there is one that lights up the tach and gear selector.

[@adrianm357]

So you didn’t have to buy a different bulb to make the range selector blue? So so I understand correctly. Was thinking about mkig the range selector green but if I can’t thats fine I’ll buy 6 blue ones. Thank you!

[@BryanJohnson81]

If I remember right that is correct. You’re welcome.

[@matthewazpilicueta6795]

Nice video, man. I'm looking to replace the odometer gear. How would one take out the entire cluster without damaging the gear selector spring?

[@BryanJohnson81]

Thank you. If I remember right , you can take the string off of the steering column and everything in the cluster will stay where it is.

[@matthewazpilicueta6795]

Gotcha. I'm going to work on my 88' Chevy C3500 this weekend. Thanks for the speedy reply!

[@BryanJohnson81]

Good deal. Hope that helps. Good luck with your project.

[@kyleharris7221]

What diameter hole for the sockets? And if I put white leds in my dash, it will still be green correct? Bc it is tinted green?

[@BryanJohnson81]

It is very possible that it will still have a bit of a green tint with white leds. Not sure what you are asking about hole diameter for sockets.

[@robbylett5313]

I have a 91 GMC with the Moonie Cluster. Can I find one like this and plug it up, or are the connectors different?

[@BryanJohnson81]

I'm not 100% sure but I think they are different.

[@CompactSandwitch]

they are completely different. moonie clusters require taking the whole cluster apart

[@robbylett5313]

Yes, I was talking about just swapping the entire cluster from Moonies, to this style.

[@Propwashaviation850]

Did you have to paint this blue to get that bright color? If so what paint did you use?

[@BryanJohnson81]

I didn’t have to paint anything. Just used blue LEDs

[@MexicanodeCorazon15]

Hey there! Will this work for a 1993 Chevy Suburban?

[@boobiesloane]

That’s a dumbass question honestly! It’s the same truck just different name of course it’ll work

[@YouKnowanth]

@@boobiesloane 🤣🤣🤣

[@zachfowler1410]

I have one bulb that always flickers and looses power on my dash but its not the bulb. Something else is causing it to do that. Could it be something wrong in cluster. HELP

[@BryanJohnson81]

I’ve had that problem before. It was just a bad connection. All I did was turn it back from full lock just a little bit and that fixed it

[@michaelforister5536]

Is it true that there is a film on the panel that makes it look green with the stock lights? If so how do I remove that? Don’t want everything looking like a blue/green color.

[@brokendudes0172]

When I do mine I have red ones and they don't light up the whole dash just bits and pieces so why won't mine work its a 92 with same setup as yours

[@BryanJohnson81]

LED’s are polarity sensitive. If some aren’t working turn em 180 and they should work

[@brokendudes0172]

@@BryanJohnson81 so I did try that they never worked but my buddy had some blue ones and they worked we just assumed that the red ones weren't strong enough to light the whole dash

[@BryanJohnson81]

That’s odd. The color shouldn’t make any difference

[@brokendudes0172]

@@BryanJohnson81 that's what I thought but it does and they were the same brand of leds as the blue ones

[@jovannigonzalez4020]

Question what switch was that right underneath the light switch on the left hand side?

[@BryanJohnson81]

That one is for the cargo light

[@jovannigonzalez4020]

@@BryanJohnson81 do you happen to know where i could get one?

[@BryanJohnson81]

LMC Truck should have them. You could probably get one from the local auto parts store too.

[@tenwalls2428]

Any ideas why the T10/194 LED replacements are incompatible with a 1992 Chevy Silverado?

[@BryanJohnson81]

I have no idea why they wouldn't work. Chevy and GMC use the same cluster. Do they not fit? Not lighting up?

[@tenwalls2428]

Ebay and Amazon have product compatibility tests for specific vehicles, every time I check the T5 and or T10, with any seller, it says these are not compatible with my '92 Silverado. Which size is for the instruments, like speedometer, fuel, oil, etc and which is the smaller size for the warning lights, like seat belt, check engine etc.

[@BryanJohnson81]

eBay said the same thing with mine. They worked just fine. The T10 are for the gauges and T5 are for engine, seat belt, turn signal lights etc.

[@tenwalls2428]

Great, thanks!

[@BryanJohnson81]

You bet.

[@badger6181]

What are the bulb sizes for 94 gmc k1500

[@BryanJohnson81]

They are all the same. 1/2” T10. The bulbs them self are 194

[@badger6181]

Bryan Johnson. So do i just order the t10s with sockets to to switch out?

[@badger6181]

Bryan Johnson it looked like some of the sockets were smaller..like the warning lights i believe

[@BryanJohnson81]

I would. It’s not worth messing with the stock bulb sockets

[@Raulcane69]

what size bulbs did you use? do I need to buy the twist locks with them? I have a 91 with the stock gauges

[@BryanJohnson81]

+Raulcane69 They are 194 bulbs but I'd get the ones that come with the twist locks. The stock bulbs are soldered into the twist locks and are a pain to get out.

[@louismax77998]

Bryan Johnson what kind of LED bulb could I purchase instead of the Sylvania 194 standard stock Chevy LED bulb what about aftermarket should it take t5 or t10 please let me know thank you so much for your video it was awesome you're the whole reason why I want to change my cluster lights

[@BryanJohnson81]

Jeremy I'm glad you liked the video. Check out my other videos. I also put leds in the climate control and painted the gauge needles blue. You might want to see that as well.

[@amariodom4858]

can I swap the steering wheel from a 1994 with a 1998, I like the steering wheel in your truck better than mine

[@BryanJohnson81]

I couldn’t tell you for sure but I think you can

[@jeremywiebe4074]

Where did you get the LEDs from?

[@BryanJohnson81]

I got mine off of eBay. You can get them from Amazon as well

[@scottydoesntknow254]

What about the warning lights, any LED ones for those?

[@BryanJohnson81]

Scotty doesn'tKNOW I believe all of the other lights are T5

[@scottydoesntknow254]

@@BryanJohnson81 thanks. May as well do them off if I'm in there.

[@mahjayedagoat6031]

I’ve got a question about my guage lights, what abbreviation for the fuse is it ?

[@BryanJohnson81]

It’s the top left 20 amp fuse. It should say gauges

[@mahjayedagoat6031]

Ok , and yesterday when I replaced a few fuses they stopped working

[@BryanJohnson81]

that’s interesting! As far as I know that’s the only fuse for the gauges

[@mahjayedagoat6031]

Bryan Johnson ok , I’ll look into it

[@SuperGonggong]

ok, does that gsp plug into power where that stock radio used to be?

[@BryanJohnson81]

I never did get around to hard wiring the GPS in to anything. I just ran the wires around the side and plugged it into the cigarette lighter

[@SuperGonggong]

Bryan Johnson aha, can u make a video showing the GPS working. Caz it's very unique and nobody really has one up. I'm contemplating on GPS or a rear back up camera.

[@BryanJohnson81]

Unfortunately I don’t have this truck anymore. I sold it and bought a 2002 Sierra.

[@SuperGonggong]

Bryan Johnson what kind of world are we living in.... How much u get for it?

[@BryanJohnson81]

Haha! I got 2800 for it.

[@kevinmiranda8365]

Did you also changed those small ones?

[@BryanJohnson81]

No I didn’t, just the big ones

[@kevinmiranda8365]

Bryan Johnson what do the small ones do?

[@BryanJohnson81]

They are for the turn signals, check engine, brake etc.

[@kevinmiranda8365]

Bryan Johnson What size are the small ones

[@BryanJohnson81]

I don’t remember for sure but I think they are t5

[@juanlucio628]

Love your video I just changed mine to blue also but my rpm meter is still green tho how can I change that?

[@BryanJohnson81]

That's odd that only one is different. Mine actually still lit up yellow. If you want to change needle color you will have to take them off and paint them or get aftermarket needles. I painted my needles blue. You can see it in my other video of the climate control light swap.

[@jacobphillips6203]

I got the red ones just like urs and they come on just not bright and my brightness adjuster don’t work u think the bulbs are bad they sent me

[@BryanJohnson81]

If your brightness adjuster doesn’t work I’d say that’s the problem.

[@jacobphillips6203]

The adjuster works with the regular bulbs just not the led it stays the same I think it the leds I bought aren’t bright enough

[@GeekBoy03]

Cheepies will have a problem dimming @@jacobphillips6203

[@FSEVENMAN]

Good job dude well done

[@BryanJohnson81]

Thank you!

[@ethantempleton7863]

Thanks man I have a 94 K5 Blazer with the same setup and I've been trying to find a vid that explains how to tear the dash apart and replace them,until now thanks @Bryan Johnson

[@BryanJohnson81]

Ethan Templeton Glad to hear it helped. Check out the video on how I did the heater/AC control if you are wanting to change those to match. If you have any questions ask away. 👍🏼

[@ethantempleton7863]

Bryan Johnson oh I might honestly thanks

[@BryanJohnson81]

Ethan Templeton One of these days I will have another video about how to change the display color as well.

[@ethantempleton7863]

Bryan Johnson that'd be cool to see but have you done a video on how to change your lights to LED in your 4WD lighting ?

[@BryanJohnson81]

Ethan Templeton I haven't made a vid on how to change those but it's easy. All you have to do is unscrew the shifter ball and take out the two screws holding the cover. Id have to double check the bulb type but I'm pretty sure they are 194. There are two of em.

[@robbyota5598]

Are the LEDs dimmable? If so what brand are they?

[@BryanJohnson81]

I cheeped out on mine so they aren’t dimmable. I can’t remember what brand they are. You can buy some that are.

[@Ghanas]

Hey bro do you think you can help I just bought my beautiful 1993 chevy c1500 cheyenne and I wanted to change my gauge lights to blue leds. do you think you can send a link of which ones will fit ?

[@BryanJohnson81]

This is what you are looking for. Make sure the sockets fit a 1/2” hole. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F181898111462

[@jefjeepstaycj]

I have a 1991 Chevrolet Suburban 2500 is it going to be any different

[@BryanJohnson81]

They are the same instrument panel so there won’t be any difference.

[@moisesmoreno9308]

Donde compro el cubo que esta dinde antes estaba el panel de audio?

[@BryanJohnson81]

I found it on eBay

[@moisesmoreno9308]

How do i look for it? Thank you

[@moisesmoreno9308]

I mean, what is the name of the piece?

[@BryanJohnson81]

Moises Moreno www.ebay.com/itm/GM-GMC-CHEVY-PICKUP-TRUCK-POCKET-RADIO-DASH-KIT-CAR-STEREO-STORAGE-CUBBY/400321174228?fits=Year%3A1992%7CSubmodel%3ASierra%7CMake%3AGMC&epid=18017008415&hash=item5d35005ad4:g:Ty8AAOxyYYlRthk9

[@n0va.fps2]

How do you change the LEDs in the 4wd shifter

[@BryanJohnson81]

It’s easy. Just take the shift knob off and there are two screws holding the indicator to the floor and there are two bulbs in there to change

[@devanward2526]

What model is the gps I really need one for my 89 c1500 with the moonies. My speedometer doesn’t work

[@BryanJohnson81]

It’s a garmin nuvi

[@joshuadavidcovington]

When I did mine. It's like the needles light up more than anything. Its hard to see the numbers and gauges.

[@BryanJohnson81]

That’s interesting. The lights aren’t separate for the needles and numbers. It should all be lit the same

[@josephroy4132]

Where u get the cubby hole for the GPS to sit so perfect

[@BryanJohnson81]

I found it on eBay. Search for radio dash kit and a list of em will come up

[@mblrwon]

So what if you pull the wire for the gear selector off 😅

[@BryanJohnson81]

It will still shift, just won’t show what gear you’re in lol

[@Quadkid12345]

So what about the green tint that’s behind the dash. I️ our red leds in mine and it doesn’t light up the Speedo or tac cuz of the green tint lol

[@BryanJohnson81]

What type led’s did you get? I put in 8 smd led’s that are bright enough to show the blue color instead of the green backing color.

[@kyleharris7221]

Bryan Johnson would 5smd be bright enough?

[@BryanJohnson81]

They should be plenty bright. Just don’t get cheap ones.

[@kyleharris7221]

Bryan Johnson Ight thanks!

[@BryanJohnson81]

You bet

[@los877]

Would this work for a 90 c1500 I have the other style gauge that I find horrible but would is work for mine ik this is a old video but pls any help would be appreciated :0

[@BryanJohnson81]

kzbin.info/www/bejne/f53YmIhpnJhonLs Here is a link for the other style cluster. Hope it helps

[@rj-tt6sc]

how many LEDs does it have

[@BryanJohnson81]

I’m pretty sure I said how many in the video. I think there’s six

[@josephalba8460]

my 91 has the same cluster but on the back the lights are not open.

[@BryanJohnson81]

there’s a cover that needs to come off to get to the lights

[@josephalba8460]

@@BryanJohnson81 okay i will try that! do you have any info on the cruse control working when it wants too

[@BryanJohnson81]

@@josephalba8460 that could just be a bad connection somewhere

[@socrkid901]

Hey has anyone switched the instrument cluster from the moon clusters to this one in the video. If so how you do it? Does the tech work?

[@skywalker2852]

I haven't changed mine yet (looking for a replacement with similar mileage), but from the videos and posts I've seen, the one with the tach is a plug-n-play replacement for the "moon" cluster.

[@jorgefigheroa77]

I ordered T5's are those the correct size?

[@BryanJohnson81]

T5 are for the turn signals, engine and brake light etc. the gauge lights are T10

[@jorgefigheroa77]

Bryan Johnson thank you buddy..👍

[@BryanJohnson81]

You bet

[@loyalthebeast9168]

Thanks man you saved me I was about to get t10

[@dolphpage406]

Will this work with a 92 Yukon gt?

[@BryanJohnson81]

If it looks the same as mine it will work

[@myalaskalife5837]

do thay come blue or are those special order

[@BryanJohnson81]

I ordered blue lights. You can get any color you want.

[@myalaskalife5837]

Bryan Johnson cool last question are those the same lights that your license plate lights use

[@BryanJohnson81]

I couldn’t tell you what the license plate lights are. I’m pretty sure they are a different size bulb

[@myalaskalife5837]

Bryan Johnson alright thanks for the help

[@jbyj222]

i have a 1994 chevy wt c1500 and the t10 bulbs i order didn't work so i had to order t5 bulbs and those worked

[@BryanJohnson81]

That's weird. I wonder why the t10 didn't fit.

[@myalaskalife5837]

my truck is a standard is it the same process

[@BryanJohnson81]

Yep. It’s the same process. You won’t have the gear selector to deal with so it will be a little easier.

[@myalaskalife5837]

Bryan Johnson thanks

[@BryanJohnson81]

You bet.

[@DarkBoi227]

What LED did u use

[@BryanJohnson81]

I just used cheap eBay led’s

[@reidbowers_21]

Can you use the original twist lock and put in t10 bulb

[@BryanJohnson81]

You can but it is a pain in the ass to get the stock bulbs out. If you are getting the bulbs by them self they are 194's

[@williamogden5583]

How many total t10s and how many total t5s

[@BryanJohnson81]

I’d have to watch the video again myself. It’s been a long time but I’m pretty sure there’s 6 T10’s. I didn’t change the others so I couldn’t tell you on those for sure. I’d guess 10 or so

[@brandonstrickler9379]

My skinny cable to my shifter that you said make sure not to pop off came off and I don't know where it goes now and anyone send me a video to help me with this plzzzzz

[@BryanJohnson81]

Brandon Strickler kzbin.info/www/bejne/oqPQd613rrCNr9E Hope this helps.

[@bennieeubanks6055]

Awesome video

[@BryanJohnson81]

Thank you sir.

[@louismax77998]

can please somebody tell me what kind of LED bulb I can put in my cluster if shopping on Amazon please tell me the right size T5 T10 please somebody

[@BryanJohnson81]

They are T10. Just the bulb without the twist lock socket is 194

[@Hxctor._813]

I put in white led lights but my cluster is still green

[@BryanJohnson81]

The film behind the gauges is green so unless you change colors it will still be green

[@Hxctor._813]

@@BryanJohnson81 is there a way to take off the film?

[@BryanJohnson81]

@@Hxctor._813 where there’s a will there’s a way but I never went that far with it

[@stevenflynn1509]

anyone know where to find instrument panels? looking everywhere and I can find em

[@stevenflynn1509]

it keeps showing results for the interior just newer than that

[@BryanJohnson81]

FLYNANIGAN MKII What is it that you are you looking for? Other videos or an actual instrument panel.

[@stevenflynn1509]

Bryan Johnson im looking online for different instrument panels and everywhere I go it just shows the instrument panel for the newer dash styles

[@BryanJohnson81]

Have you tried checking your local salvage yard?

[@stevenflynn1509]

yeah. an the three little things I need are the most commonly swoped

[@samyza200]

Where can I buy these led lights

[@BryanJohnson81]

Just about anywhere. I got mine from eBay.

[@trevorkluender4154]

I I just did this today but my gauges don't light and anything I do they won't light

[@BryanJohnson81]

Did you try turning the bulbs around? I had one that gave me fits. Just had to clean up the contacts and it started working.

[@trevorkluender4154]

Yes I did. And no change

[@BryanJohnson81]

Hmm. Only other thing I can think of is to make sure the bulbs are making good contact. Try pulling down the contacts on the bulbs a little bit to get a little tighter connection.

[@timbaker6774]

leds are polarity sensitive, unlike iridescence bulbs they only will work one way, pos to pos an neg to neg

[@tenoriopaintcollisiontenor4363]

So u put all t10 in there

[@BryanJohnson81]

No, just the 6 for the gauges. All other lights are smaller. I can’t remember for sure but I think they are T5

[@tenoriopaintcollisiontenor4363]

@@BryanJohnson81 the other lights are for the indicators

[@BryanJohnson81]

Right. Turn signals, brake, check engine, high beam etc.

[@tenoriopaintcollisiontenor4363]

Received my led yesterday so I put them on but still they won't light up I tried flipping them and nothing any ideas

[@BryanJohnson81]

Only thing I can think of is to turn them back a little bit from full lock and make sure they are making a good connection

[@dboser1]

What is the new LED bulb number.

[@BryanJohnson81]

Don Boser They are the same as stock. T10 or 194

[@cameronmoore8989]

How did you do your rimd

[@BryanJohnson81]

Cameron Moore It took a lot of masking tape and patience.

[@antoniocausin3189]

wow good job

[@BryanJohnson81]

Thank you 👍🏼

[@mrEpic395]

Bryan Johnson where did u buy ur dash cover for this truck

[@BryanJohnson81]

jonathan martinez The dash cover was in the truck when I bought it. I just got a dash cover for my 02 from cover king. I'd check them out.

[@mrEpic395]

Bryan Johnson okay thanks I appreciate

[@kx250rider09]

jonathan martinez they sell them on eBay for like 10 dollars

[@GeekBoy03]

Now where to get the actual dash. Mine is all cracked to hell. and LMC truck who specializes in parts for older trucks does not have them @@kx250rider09

[@notacop_yt]

I didn't know the lights were so easy to replace. I thought you had to solder leds to the circuit board.

[@BryanJohnson81]

Yep. OBS trucks are easy. I have an 02 Sierra now and have to solder the bulbs in the climate control.

[@ivanmeza9679]

Great video. Thank you

[@BryanJohnson81]

You’re welcome. Hope it helps you out.

[@ivanmeza9679]

Yes it did just order some from Amazon.

[@BryanJohnson81]

Good deal. 👍🏼

[@ivanmeza9679]

Bryan Johnson what size bulb you use for the climet control lights?

[@BryanJohnson81]

If I remember right, they are a t5. 12mm.

[@jacobferreira876]

Where do i get the lights

[@BryanJohnson81]

I got mine from eBay. You can find them on amazon also.

[@angelaguilar9904]

What’s the bulb size

[@BryanJohnson81]

T 10 If you just want the bulb without the socket, it’s 194

[@mariapuentes8873]

are t10 leds?

[@BryanJohnson81]

Yes they are

[@JoseGarcia-jp8gs]

damn you think i can use color changing leds on my 1994 cluster

[@BryanJohnson81]

You can use whatever you like just as long as they are T10 size bulbs.

[@ashermartin4945]

where did you get your bulbs? I have a 94 SLE but it doesn't have the rpm gauge for some reason

[@BryanJohnson81]

I got em from eBay. Search for 88-98 led instrument panel lights and a bunch will come up. Get the ones that come with the twist lock already on them.

[@oscaralavez7292]

Hey my 94 does show rpm either

[@Backyardbuilds98]

Where did you order the lights

[@BryanJohnson81]

I ordered them from eBay. I can’t remember who the seller was though.

[@Backyardbuilds98]

Bryan Johnson I can’t find them at all really want them

[@BryanJohnson81]

Search for T10 led and a whole bunch will come up

[@Backyardbuilds98]

Bryan Johnson do I have to just buy the bulbs? Are the thing that holds the bulbs too ?

[@BryanJohnson81]

It will make your life a lot easier if you get the bulbs with the sockets!

[@YouKnowanth]

I did this and the dash stopped working

[@BryanJohnson81]

Did you make sure it got plugged in all the way?

[@rickwizard5838]

In 1987 for Canadian Specs. Correct it.

[@BryanJohnson81]

???

[@rickwizard5838]

In 1987, GM in Canada decided to redesign the Chevy Pickup if you watch Dave's Farms video, on the 1987 Chevrolet Pickup. U will see if i'm right. I'm a car youtuber as well.

[@BryanJohnson81]

Ah ok. I don't keep up with Canadian trucks.

[@rickwizard5838]

Oh ok. I didn't know that. I'll send u the link to watch a little bit of the video that dave's farm uploaded a while back.

[@Jonathantinted]

Can you help me out?

[@BryanJohnson81]

What do you need help with?

[@Jonathantinted]

@@BryanJohnson81 WELL I HAVE A 92 CHEVY SILVERADO.. AND WE HAVE HAD IT FOR MANY YEARS... I WOULD LIKE TO INSTAL THE LED LIGHTS ON THE HEADBORD..

[@BryanJohnson81]

@@Jonathantinted it is the same process as it was with mine