8th Gen Civic Fuel Return Set Up

Simple walk through on how I ran my fuel return on my civic.

[@BulliKid]

Did your fuel sending unit fail yet?

[@choryboy8618]

nice content

[@BulliKid]

How’s the evil energy lines holding up since install?

[@BulliKid]

Can I do a return set up with using barb fittings instead of an lines?

[@thatbluefa5913]

You could but i think you have to use regular rubber hose which doesn't hold up to fuel as well

[@BigRed0]

No you can’t

[@jmvillanueva9759]

where did you find the fuel pressure regulator blank?

[@rmt5820]

Regarding from Sweden! U didn't speak about ur regulator in the tank! Most car has 3.5 bar from factory, what was ur new regulator higher or lower?

[@kevinharris-charles4066]

Good stuff

[@Mik2005]

Hello, I hope all is going well with this setup and the car looks great. correct me if i am wrong but the way you set the fpr looks like a dead head style instead of return style. From the diagrams i have been looking at you need to have the fpr after the fuel rail and capped off.

[@noknockstuning]

Hey thank you! For a returnless yes you do have the fpr capped off. I have a return style just that I'm running the fpr before the rails instead of after, just like in the vettes. Feed line from pump to the fpr, line from fpr to fuel rail, return line on bottom of fpr. Theres several ways to route it, I chose this route because of what I had for fittings and plumbing. Haven't done an update video but the car has been running awesome, injectors are my bottle neck right now running on e85, 85-90% duty cycle.

[@kennethbuenaventura9437]

Hello bro. Im having problem with my civic fd 2009 as well even with gas on full gauge is, still blinking tried to change the whole fuel pump assembly with a new one. But still having a problem. Can you help me.? What, do you think is the problem? Fuse? Wirings? Or defective sending unit?

[@fb6kalen627]

hows that regulator holding up? about to order the same for my 9th

[@noknockstuning]

Still working as it should!! Definitely recommend it if you're on a budget.

[@its.traumatic]

can I get the link to the fuel pressure regulator blank?

[@mikeyb1nyne81]

Did you leave the hoses connected at the fpr blank within the fuel hanger? For the fuel pickup to flow through the internal filtering.

[@noknockstuning]

Yes, it goes back together like it was from factory.

[@mikeyb1nyne81]

@ARMANDO BURGOS ok cool! Thanks!!!

[@jehehdjdjdjdjdj9772]

where's the fuel filter at ?

[@noknockstuning]

It's got the strainer attached to the pump and it's also got an inline one, just forgot to show it on the video.