9" Ford Rear End is DESTROYED! What do you think Broke? Not what I was expecting!

The 9" Ford rear end broke...... This was a 28 pinion spline, for sure not the best for high horsepower but I thought it would work in a pinch..... But something broke bad.... What do you think caused this failure? This center section has been sitting for several years in a box, was it user error or just over powered it? Thanks for watching guys!
------------------------------------------------------------------------------------------------------------------------------
www.TurboJohnRa...
The Drag Racer's Wife sub to her channel: / @thedragracerswife
Every Wednesday Turbo John is LIVE with members of his KZbin channel. Learn insider secrets, ask questions or share info about your own racing program, and hang out with the Turbo John crew! Join here: / @turbojohnracing
TBM: www.tbmbrakes.com
Lightning Quick Glides / anton.morgan.3705
Traction Compound www.gripgrease...
TKM: www.tkmperform...
Thomas Racing Service: Jeff Thomas No Prep Struts
Black Sheep Industries: blacksheepindu...
Tin Soldier Race Cars: tinsoldierrace...
Forced Inductions: www.forcedindu...
Mod Series Shocks: qa1.net
Torque Converters: www.hughesperfo...

[@davedave2525]

At that power level it's time for a Strange Ultra Center section!

[@timothycraft5448]

On my 9” the oil hole goes on the top to catch oil from the ring gear. Just my observation.

[@cchevyboy]

I can smell this video 😂

[@HeadFlowInc]

Short or bad ground 99.44% of the time with electrical gremlins. 👍

[@Blain5700]

PMR to the front! Letssssssssss Gooooooo!!

[@FORCFED]

The bearing metal is probably on sensor causing it to work than not sometimes. Goooo Randy 😎👍💪

[@kevinlarrick3285]

It’s funny to read the comments and how many people are experts on just watching the videos and seem to know what’s wrong with it lol

[@sonnyjones1353]

Gld to see your back in a mustang again congratulations

[@alexvelez2141]

Nice shop Randy

[@freddiemoralez1536]

🎉🎉 THANKS FOR THE UPDATE AND GOD BLESS ALL 🎉🎉

[@robertdouglas3456]

Great job of R & R Randy & TJohn!🤩🤩

[@toddclark332]

Been there done that and it sucks more money more money 😂 guys thanks hope you boy's have a great week later 👍

[@mannmadesbc]

Enjoyed the content, as always!

[@tomhamilton9140]

Hope the repair will be a long term cure.

[@XAllky]

Still want to see that Race….. J Doc// PMod Randy

[@darrellsnow1463]

Add a ground from body to rear-end housing

[@richardharris492]

In Florida, I'd say it was plugged by a dirt dobber, lol. They find and fill every hole they can

[@DSRE535]

Those pro gears have a tiny bit of flex in the teeth so that they can handle more shock load so when you try to run street gears on these high horsepower cars they usually crack all the teeth and they don’t last more than a few passes at the most !

[@DonCatherman]

Race break fix. Repeat. 😅... 😎👍💯

[@Tump97]

Just had the same thing happen to mine lol same exact bearing failed on mine

[@jkfonyi]

Whatever happened to Tyson he had the green mustang and another car . Haven’t seen him at the races in awhile

[@robertbray5735]

Check the rear seal on transmission?????maybe

[@donaldgray5561]

Need ultra case 10” pro gears

[@kevintaylor7740]

Crush collar or solid spacer..?

[@robertbruneau112]

niether, was missing in video

[@skatepunk6894]

Was that a strange failure?

[@Hjfvvdst]

Maybe an 11" is in order.

[@dennykatz157]

Rear end fluid?

[@robertbruneau112]

colapsable spacer looks to be missing, improper bearing preload. i have had it happen

[@timothycraft5448]

Most everyone uses solid spacers instead of a collapsible one. Just add or remove shims to get the correct preload.

[@jondahl3173]

I had my grand daughter's 9 inch center section from her dirt track car handed to me to fix. Found the company that they purchased the assembled center section from didn't put the solid spacer in. Went together real nice after I got that part!

[@robertbruneau112]

@@timothycraft5448 for sure but without either you have what we have here today

[@robertbruneau112]

@@jondahl3173 it has to have either colapsable or solid after preload is determined. if none is put in pinion bearings will come apart

[@jondahl3173]

@@robertbruneau112 Hate to be hard on ya, but I have spent most of my life as an auto repair technician, and have rebuilt numerous differentials from car to 2 Ton GM trucks to quick change race cars. Think I know what's inside of one...

[@707SLAYER]

You are still stuck on use an reuse it will get you 90% OF THE TIME ....

[@robertbray5735]

Do you run pro gear…..lol….softer to flex…..You guys already know that stuff……go Showmod Randy…….

[@jheibeck6059]

First comment live the channel john