904 Torqueflite Air Check

[@trailraiders6350]

does the pump have to be installed to do the air check?

[@ArlingtonBeech]

I just reassembled my 904. I did this air check and all was well except the rear clutch. I can sometimes hear it engage but i also hear air coming out near the input shaft area, is this normal?

[@deanv8663]

Having the same issue what did you find? If I have the torque converter installed it air checks fine, however I feel that there still may be an issue.

[@onebladeprop]

@@deanv8663 Anyone ever figure this out?

[@onebladeprop]

Ok so the one he says goes to the front clutch my manual calls the rear clutch. Disassemble it(yay), remove the clutches and this is the one you have to compress the spring to remove the piston. There are two seals that I forgot to replace. seems to work now.

[@deanv8663]

@@onebladeprop I believe the leakage to have been a normal function of the transmission. I tore mine back apart and could find no fault. This was a couple of years ago and the vehicle is still driving without any problems. Hope this is helpful @onebladeprop.

[@onebladeprop]

@@deanv8663 Yes it does, thanks! I wasn't really expecting a reply and figured you got yours going a few years ago. I just wanted to leave something for anyone else who might come across this.