90kg Welding Table Build

In this video I continue building my welding equipment. This time I make a welding table. I am beginner in welding but it looks like I'm making some progress, right?
All plans I ever made I collected in one place. Save this link for future - I will add new plans to this collection and don't forget to subscribe to my channel to stay tuned.
drive.google.com/drive/folder...
Support GRINwood:
PayPal: [e-mail]
Watch my workbench build here:
• Workbench Build
Thanks for watching and hope this video was helpful.
GRINwood shop:
www.etsy.com/shop/GRINwood
Follow GRINwood:
/ grinwoodprojects
/ dakhnogregory
/ grinwooddesigns
/ grinwooddesigns
Music:
Parasail - Silent Partner
#woodworking #diy #GRINwoodtools .
Would you like to use my videos in your media projects?
Please contact me: [e-mail]

[@GRINwood]

In this video I continue building my welding equipment. This time I make a welding table. I am beginner in welding but it looks like I'm making some progress, right? 12:12 as you can see the table top was curved down because of shrinkage of welds. Watch this video how I fixed this: kzbin.info/www/bejne/mpWmlWhjrdd-eck All free plans here: drive.google.com/drive/folders/1636_O_7KVQ5hzWAhDXBornWnvxXfweba?usp=sharing GRINwood shop: www.etsy.com/shop/GRINwood Support GRINwood: PayPal: [e-mail] Special thanks to Marc Köhring Roger Shiffler Knut Olav Skare for donates

[@youtukang]

Thnks for sharing

[@walidsebaa6066]

L

[@harlech2]

Great build... I think I will build one just like it. I have a question though... what kind of super glue did you use on the rubber pads and what did you spray on the rubber just before attaching them? I have never had any success getting rubber to stick to anything no matter how well I prepped or the adhesive I used.

[@michaelevans2989]

@@harlech2 Looked like CA glue with activator. Wood turners live by it.

[@alaehvidz9482]

what kind of welding machine are you using?

[@andyjame3350]

MUY buena calidad, el texto imagenes. kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO Un manuel muy completo y trabajado. Resulta muy práctico. Para principiantes y profesionales. Lo recomiendo

[@ClintsHobbiesDIY]

Your welding is great. Just what I was looking for. Affordable, practical and sturdy. Many thanks.

[@brandoncarlson1508]

As far as a sturdy reasonable costing welding table goes that is one of the best tables I’ve seen. Great work!!

[@Apistevist]

I just built one based on this video but went a little bigger and it's amazing. Edit: No warping or problems with heat and I've abused the thing. I do lawn care as my business and make products welding that I sell on marketplace and this thing can deal with 12 hour days of constant heat, though I've only had it about 3 months and only put in a full full days of welding on it when the weather is too extreme to do lawncare.

[@zoranpaunovic4336]

Ovo je ubedljivo najpedantniji, najprecizniji i najlepši rad koji sam video na YT. Ne može ovo svako, za ovo je potrebna ljubav prema svom poslu i veliko strpljenje. Bravo!

[@richierobinson8645]

I just built this table and it looks amazing but I added a pull out tray to catch the welding slag and anything else that might drop between the slats of the table top. Thank you for your blueprint

[@chapmanmr]

Very nice build. Having built a somewhat similar table, I realized afterwards that I hadn’t left room underneath for my feet and a TIG pedal. Something other new builders may want to consider. Nice table and a very good video!👍🏼👍🏼

[@mikelopez9817]

Wow, as an entry-level welder, I love this welding table project! Great job sir. Thank you for sharing.

[@user-ml7co9lh7o]

Отличный получился сварочный стол! Мастеру респект и уважение за его высочайшее мастерство в проделанной работе! 😊

[@gregoryl.4872]

And I was just today trying to figure out how I was going to make my table top. I dreaded doing it a single plate. Thanks for sharing. Now I know what I'm gonna do.

[@gordonagent7037]

Good job mate, simple but ver functional, sound and sturdy. This something any practical home workshop person would love and could make. Well done

[@IgorPrgin]

Simple enough, yet useful and sturdy...bravo!

[@acdii]

For a beginner welder, those tig welds look great.

[@gavinobikereddu1589]

Beautiful, rugged, great and simple. Thank you

[@Stevo73660]

That's a really nice job you made of it. Definitely a welding table to be proud of.

[@mageshgopi5644]

I was googling to find a workbench like this and hoped no one would dare to drill these many dog holes and was expecting to have long slots also in workbench. Satisfied seeing your work. This is the topper of all work bench. ❤

[@eliershtoltzman6046]

Судячи із етикетки оцту, бачу шо ми напевно земляки ))) Всіх благ, друже! Тримай марку ))

[@andreinik1563]

На 3.24- шурик "Днiпро", и на столе коробка с саморезами Expert- собственная торговая марка Эпицентра. 👍

[@mykolashatkovskyi576]

Захоплююся Вашими проектами вже давно. А сьогодні дізнався, що Ви, виходить, з України. Круто! Дякую за чудову роботу!

[@GRINwood]

Дякую, що дивитесь 👍

[@hayden5022]

the way you isolated those plates in the vinegar is also a really good idea for a bulk electrolysis rust removal solution, just the kind of idea i've been looking for recently, but in a place I wasnt expecting it, great work

[@hairpower7783]

Sos un gran artista de la madera Y RESULTA QUE TAMBIEN DE LOS METALES , LA VERDAD QUE TU TRABAJO ES INCREIBLE , SALUDOS DESDE ENTRE RIOS , ARGENTINA.

[@user-yz1sk9dw5b]

Отличная работа. Только стол после сварки пластин к проф трубе потерял плоскость . Я бы добавил хотя бы по центру еще пару вертикальных перемычек между верхом и низом и сплошным швом пластины не варил. Не критикую , а советую . Удачи, всем добра!

[@user-uz9po4fu5g]

Да его 100% выгнуло дугой, можно с обратной стороны профиля (напротив каждого шва) еще швов налепить. Болгаркой прорезать и заварить, прорезать - заварить и т.д. Потом, если надо, заподлицо зачистить. Выгнет обратно :)

[@carpballet]

I would love to see just how precise that table really is.

[@user-bn7lb2nm1o]

Автор, монтаж видео просто БОМБА!!! Очень понравился!!! 👍👍👍 Ну и стол само собой ХОРОШШШ!!!👍👍👍😉

[@unitedstatesofbuild4915]

You logged some serious drill time on this one. Nice results with the vinegar!

[@summersoldier3311]

Nice job! One suggestion, put castors on the table legs so you can move it around. You can move it to other areas of the shop, and it's easy to sweep under when you move it.

[@andrewbowers_]

Very important. Load capacity should be a minimum of 150kg per caster. The table itself will weigh between 100-200 kg. The work load would max-out around 100kg. That’s 300kg total mass. Add hammer blows and dropping heavy work onto the table, (impact load) and that double’s the load present - you end up at 600 kg. 600kg/4 = 150kg.

[@evrohouse5626]

Гарненько зроблено і відео гарно з монтовано і стіл гарний робота супер 👍🇺🇦

[@GRINwood]

Дякую за високу оцінку!

[@Shoptoolreviews]

Great build! Simple and to the point.

[@alexiuspanihidis]

видно, что человек от своей работы кайфует, так замарочиться, я такой же, дешевле было бы купить, но сам процес нравится. Молодец!

[@armandvandenbroeck9095]

Nice work. Very clean and organised, i like it. Good editing!

[@user-uz9lm9tr5z]

Молодец, столько труда и времени.👍

[@user-uz9le1wn9i]

Чтобы начать варить нужен стол для сварки. Но сам стол для сварки нужно варить. Интересная рекурсия.

[@YauhenZhukovich]

И имея ТИГ завалить в конце сетку на саморезы!

[@TheMorpheios]

Свой первый стол для варки ты должен добыть в битве сварщиков.

[@user-uz9le1wn9i]

@@TheMorpheios А кто сварил тот стол который я добуду в этой битве? Хм...

[@thebeardedstork432]

Very good ideas here! Beautiful workmanship! Thanks

[@fuhrertrial]

Amazing job Man, please dont stop!

[@user-fq6co7vx2b]

СТОЛ ОТЛИЧНЫЙ, НО БОЛЬШЕ ВСЕГО МНЕ ПОНРАВИЛОСЬ (В ОТЛИЧИИ ОТ МНОГИХ, ПОЧТИ ВСЕХ РОЛИКОВ) ПОКАЗ ОДНОГО КЛЮЧЕВОГО ДЕЙСТВИЯ, ПРИЕМА, А ЗАТЕМ УСКОРЕННАЯ ПЕРЕМОТКА! РОЛИК НЕ РАДИ ВЫПЕНДРЕЖА, А ДЛЯ ПОКАЗА РАБОТЫ!!! КСТАТИ, ХОРОШЕЙ РАБОТЫ.

[@alekslionov6444]

Ничего не тренирует нервы лучше, чем сварка аргоном гаек с цинком))

[@maxrommel2876]

Ficou Excelente... Parabéns, trabalho profissional!👏👌👍

[@jared4670]

Excellent build. Definitely going to be doing this next

[@frrapp2366]

i like all the hold down holes , i made my welding table out of a 4ft round "Chill" ( a 2 piece round centrifugal mold bolted together for making hard surface welding rod and inserts "forney supercote ect.") is bout 3 inches thick with a hole in the middle(to pour the molten metal in) is extremly heavy but when you weld to it you can just take a chisel or punch and knock the splatter off

[@brentonkelly3780]

Thanks for making and sharing! Brilliant!

[@user-qx1hr8nb8z]

Лайк поставил в самом начале просто за зинковку !!! Красавчик, я думал я один стрельнутый из крупного калибра!!! Глядь, ай, нет !!!

[@mark_luna]

Super nice table!! Looks great.

[@marklowe7431]

It was great to see someone working in metric. The feet were smart.

[@_tim]

Awesome table, I love this editing style too. Nice one!

[@yveswart369]

Very beautiful job

[@allfusionx]

Looks amazing!

[@jeffanderson4979]

Beautiful work

[@mumu1794]

Thank you for all plans

[@ozknmahn8690]

You did awesome. Nice welding table.

[@skipp7255]

Я ни разу не сварщик, но твоя работа мне Очень понравилась. I have never been a welder but I really liked your work

[@NikolayChernychov]

Браво МАСТЕРУ! Подписка!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@davethurston753]

Very nice. Great welding!!! Be safe.

[@doctor_J]

That looks sweet! Great job

[@jaimedaniel6045]

Nossa... que maravilha de profissionalismo... gostei principalmente das ferramentas utilizadas!!!! Um dia chego lá.. Um grande abraço;;

[@fabiannfl]

La soldadadura TIG es una hermosura te quedo impresionante gracias por compartir

[@steelwood74]

Such a beautiful job. 😍

[@Whodafuqcareswyt]

Great job young man! Keep it up

[@elsart0]

Very nice build indeed.

[@johntsauseb958]

You're one hell of a beginner. Beginners rarely work that neat.

[@xzeke666x]

i reall like this table, its simple and sturdy and you can hold things in place with the holes. the only thing i would have added was a draw so i would have easy accsess to things i would need like tungsten, caps and maybe some tools. two thumbs up on this

[@titikolomongso4723]

Best worker getting better..👍👍👍

[@rafik8568]

Une très grande performance vraiment bravo Mr

[@trollbane66]

Honestly, I am most impressed by the rime you spent making the feet look legit.

[@user-jh9kx7qx8y]

Да, и за аргонник «Патон» отдельный лайк. У самого имеется Патоновский ВДИ 250 Про, работает отлично.

[@slav3010]

Дякую за відео 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@sabios1000]

Ficou muito lega sua mesa, você está de parabéns.

[@ig8ltd]

Thank for your great ideas.

[@gedreillyhomestead6926]

Your work has come on in leaps and bounds from the early days. Hope you and your family are staying safe. 👍 😎

[@GRINwood]

Thank you for your appreciation of my work. Yes, we're fine for now.

[@JPLaan-ji8zw]

what a fantastic welding table

[@mehmetsalman685]

Excellent idea

[@MBJeep]

Hi,Working Vids without tiresome Music,I love this 😀Thank You🖖

[@Perrosucio09]

😳 amazed at this mans skill 👌🏻 excellent job sir.

[@richardwalters1803]

Great you tig welded it to, nice job.

[@toomanyprojectstx]

Awesome build!!

[@caturteknik]

Looks amazing

[@GONE2VT802]

That was an awesome video. Loved it!!

[@felipeduayer4981]

Very nice work, my friend! Kudos! 👌

[@user-vb8yj3bw1s]

АГОНЬ!!!! Молочага!!!!! МОчи дальше!!!!!

[@Melbournewelder]

Great build fantastic video.

[@argitis1]

hello from Greece,nice work !!!

[@wellander2003]

Nice job on the table

[@peterpearson7171]

Great walkthrough

[@sashasabov3563]

Стіл чудесний , шкока шо не рівний . 👍

[@antemarusic1966]

Nice solution, I would never say this would work...

[@luismauriciobeltranurrego2795]

So beatifull... but the last net mmmm, best with another method of fixation

[@rus333.]

Как сварщик, могу сказать, что стол для бытовых нужд отличный.

[@user-hy6ch3gx3i]

Высокий

[@vyacheslavmansurov5474]

Хороший мастер! Красивая работа!

[@baylisstic212]

Great Work!!!!

[@roman_zchukov]

10:35 Сварка поперек профиля может привести к его изгибу. Нужно вдоль варить. Видно, что прогнуло. Вся работа на смарку

[@GRINwood]

Да, стол прогнулся, но это не проблема. См следующее видео

[@hoernst2762]

Schöne Arbeit, könnte stundenlang zusehen.

[@jaldemirbatista7603]

Excelente! Parabéns.

[@ELBRICORINCON]

Great job!!!

[@coastalplayer]

very high quality work

[@chrissartain4430]

One Very Smart Idea !!

[@mikebowhunter6029]

Nice work man

[@ced2k]

That must be the biggest xylophone I've ever seen 🙃

[@thoiba00]

Lol

[@Fedor___1]

👍😂😂😂

[@karycaz]

Ehhhh

[@user-vd3tc4yt5l]

😂😂😂

[@andrewgibson1991]

Amazing video hard to find good KZbinrs out there man

[@masterfrank1985]

Eccellente manufatto, complimenti!

[@zachroller3448]

I want to learn this trade. Great work!!!

[@xplaur]

Very cool. Ccongrats!

[@mr_torx]

Great job, cool video!