How Change Oil On 3rd Generation Toyota Tacoma

[@riptearpullhair69]

LOL the drain plug drop followed by the oil splashing out was awesome

[@92813justin]

Right?!

[@Americafirst-i8q]

@@92813justin well it did

[@LAAM619]

Lol fr. Wen he said his oil was hot i was like oh oh.. that 0w20 boutta splaaash 😂

[@Popwarner-x1w]

If you pay someone to change your oil, they will put one quart of old oil back in it and keep the money for their own pocket

[@japaneseaggression]

Shit happens to me. Nothing pisses me off more than fuckin oil on my concrete

[@Egonzal316]

Finally a video that isn't recorded with a toaster, that gets straight to the point and with no music. Great video!

[@92813justin]

Appreciate it

[@christopherlacey1630]

Like the tutorial. I also like how you didn't cut out any glitches or mistakes. You definitely got my respect. Awesome video bro! Will be doing the same shortly

[@92813justin]

Haha, thank you. People can make how to videos look like it came from Hollywood or something.

[@christopherlacey1630]

@@92813justin Exactly. No ones perfect. Definitely have a supporter over here. I have a 2020 Sport 4x4 and I said let me look up realistic tutorials. Not the 3-5 min edited videos of perfection.

[@canklemedkits3772]

Dude! I’ve been doing my own oil changes for years. I learned a few things from the steps you showed. Best oil change video I’ve watched. Thank you.

[@92813justin]

Thank you for the great comment!

[@TucsonDude]

Didn't list torque settings, tho?

[@brianbrannanHVACTech]

@@TucsonDudeuh yes he did

[@codycook9610]

I like this video. I'm changing mine for the first time tonight and I was sick of seeing these videos that were 20 minutes of useless stuff. This was to the point and showed exactly how it's supposed to be done. Appreciate the insight. This is the first time I've had to change oil on a vehicle that has a filter like this so I'm glad I researched it a bit

[@92813justin]

Thank you for the great feedback, I’m glad the oil change went well

[@Jander406]

I just bought a brand new Tacoma and I wasn't sure what the oil filter situation was. I appreciate the thorough explanation.

[@92813justin]

Thank you

[@jeffbrandenburg7862]

Very good video, gave me the incentive to change my own oil. I'll add a couple tips from my experience. 1. When my neighbor saw the 3-foot circle of splashed oil mine splashed like yours - 0W20 is almost like water), he suggested to use a tall bucket, tip it to the side, and then stick it right under once the bolt is free. Years ago I bought a couple of those gizmos that replace the bolt, have a cap that screws on, and at oil change time you take the cap off and then screw on a gizmo with a bump in the middle that, after it's threaded half way on, pushes in a spring-loaded stopper inside the gizmo attached in place of the bolt that lets the oil flow down a hose. Long explanation, but I might give that a try next time. 2. Eighteen foot pounds on the oil filter housing ) is basically hand tight. I didn't hear the click on my torque wrench and kept going and had a horrible time trying to get that housing back off to reset it to eighteen pounds. I broke the filter wrench at the socket it was on their so hard. There are movies on youtube by mechanics showing how to get Toyota oil filter housings off, so apparently it is not uncommon. So beware: don't over tighten the oil filter housing more than just more than hand tight or your fairly quick oil change turns into a whole afternoon project. 3. The skid plate bolts in the front are tricky on a 2020 Tacoma as they are up under the plastic lower bumper. I would suggest using a long extension and pulling the plastic bumper down to get access. Otherwise it is a job to get those front bolts in to replace the skid plate. I've subscribed now and look forward to more of your videos.

[@Wingman-yl3qq]

6 full quarts is great. This means you have no sludge occupying space. Thanks for the video brother! Very helpful.

[@jerrys2745]

You must have pre loosened that oil filter cassette before you made this video, that came off way TOO easy. It took two people to get mine off. We had an 18" breaker bar plus a 24" cheater, with one person hitting the cassette removal tool, fairley hard with a large hammer . . . . . . . .we also had a bottle jack pushing up on the cassette removal tool so it could not slip off. With all that, . . . . . . . it was all I could do to break it loose, and I bench 345 pounds. I think you do your viewers a great disservice by making it look so easy. I have always changed oil in every car, truck and Harley I have owned, and I have never seen one this difficult. I thought that I was going to find it cross threaded, but it was not. This cassette oil filter was a really bad idea THX Toyota!

[@armyuvme]

If you leave dip stick in and oil cap on until after you've removed the drain plug, it may slightly slow the flow.

[@isaacthompson2260]

Glad you ended up putting 6 full quarts, Toyota calls for 6.2 when you drain the oil filter.

[@martingomez4884]

I have the exact oil catch pan and that initial splash caught me of guard.

[@92813justin]

Haha yes, I will upgrade here soon.

[@jmyers6175]

For my DIY oil change, I use à deep drain pan with a drain spout, to prevent that over splash problem. After the oil change, I use à funnel and fill saved milk bottles and take for Recycling at O' Rielly. I like to use Amsoil. I rotate the tires every oil change 5k.

[@IceAngler]

damn I'm glad I'm not the only person who makes a mess when I change oil. Thanks for the vid man.

[@josem.2909]

Carboard boxes come handy

[@Manhandle730]

It’s hard not to with this new oil water they require.

[@koakahal]

Going around thanking all these videos from different people for helping me learn this. Yeah I got that same junk oil pan cuz that’s all that’s available cost wise.

[@cpsmonroe1]

When you cleaned off the drain plug, you used non-chlorinated brake cleaner which is ok to use near plastic trim. But if it was conventional Brakleen, that overspray from spraying that close to the grill would be no bueno.👍🏼

[@92813justin]

Great point!

[@americanmilitiaman88]

The filter housing is filled rather quickly upon cranking the engine. Its not necessary although it wont be hurting anything doing so. I woked at a lube shop and many makes and models have the oil filter in a location where the oil would just pour back out

[@Jack_all]

I miss how easy changing the oil on my 2nd gen Taco was, the oil filter sat right on top of the engine, never even had to touch the skid plate

[@Dat_Sun]

I just did my 2nd oil change in my 22 trd tacoma. It's a horrible design for driveway maintenance. I have a spin on filter adapter on order, im done with the 1970's German style cartridge oil filter.

[@jyg4883]

Good stuff. Most videos only show fast clips. Your shows step by step. Keep up the good work.

[@92813justin]

Thank you!

[@flyingdingoIV]

Great video. Lil different from changing the oil in my 99 Tacoma, with all the gaskets and stuff. Things have definitely changed.

[@norbertriojas]

Dude, thx so much for this vid! Been changing oil on my cars since I was old enough to drive. Never thought I’d have to refer to a KZbin vid to learn how to change the oil on my new Tacoma! But at least we can. Cars will be all electric soon enough and then we’ll all be at the mercy of the dealerships😳

[@92813justin]

Keep your Tacoma! I have about 45k and running smooth

[@dansullivan6183]

Me either!!

[@carlosmendoza9109]

Absolute proper video you break it down making the process simple 👍🏽

[@alphasierrahotel7]

Good video man, OEM spec is 6.2 quarts for V6 with the tow package, and 6.1 without. You can throw 6 quarts in without second guessing.

[@92813justin]

Thank you!

[@aarongray3573]

Thanks! Needed to know that.

[@Americafirst-i8q]

Always better being a little low then too high on the oil level

[@GabrielLopez-ku9cl]

for anyone prepping to do this, I'd suggest having a larger 1/2" breaker bar and a 24 mm socket for the oil filter housing because those things can be over torqued by the dealership, at least mine was. this was the solution I'd found on tacoma world, if anyone runs into a similar thing

[@BubCityHoodRides]

Man, just broke the black fitting that stick out. Feels like I'm twisting the wrong way .

[@JokahFACE]

They torqued the shit out of mine when I changed the oil on my taco the first time. Real bitch

[@curtc8686]

Thank you for walking us through the oil change. The video is very helpful. I noticed there is metal dust on the end of the dipstick at 12:34. My tacoma has the same issue. It appears to be from scraping the dipstick tube. Hoping it won't cause a problem.

[@92813justin]

WOW, what a great catch. Ill have to clean that next time.

[@curtc8686]

@@92813justin I have always noticed the metal dust on the end of the dipstick of my 2019 Tacoma. I was concerned metal was coming from the engine so I took it to the dealer but they had no answers. I realized that it is coming from scraping the dipstick tube when there was metal dust just by pushing the dipstick half way into the tube. After watching your video I changed the oil and saw metal dust (not a lot, but I would rather not see any) in the filter canister. I really don't like the idea of that metal in the oil. In my opinion the dipstick tubes should be made from a better metal. Thank you for your reply. I am just wondering if other people are concerned about it.

[@daniell9666]

@@curtc8686 changed my cousin's oil today and also had some specs of metal in the canister. Was a little concerned but I'm assuming it's normal.

[@CharAznableLoNZ]

My truck also has that plastic canister on it. First rig I've had that has one. Every other one I had was the standard metal canister with the filter already installed. There is an OEM aluminum drop in I might pick up to swap out the plastic one.

[@thostube13]

Removing the oil drain plug. Like a cow pissing on a flat rock. Same thing happened to me the first time I changed the oil. :-))

[@Americafirst-i8q]

Just wipe the threads of the drain plug with a rag no need to spray it with brake clean

[@Manhandle730]

Why not be extra thorough? The cost is a fraction of a dollar, takes seconds and you know it’s good and clean.

[@throwednoe]

Best oil change video for tacoma!

[@92813justin]

Thank you Noe

[@lazaroverajr4586]

12:33 what are the metal shavings on the oil dipstick I saw that on mine the other day and am freaking out mines got 90k miles, oil looked good and the filter was clean I read on tacoma world that it could be from the dipstick scratching the oil dipstick tube but am not sure about that 🤔 great video

[@derekward2266]

Great detailed video! Feel good about doing my first oil change on my Tacoma!

[@92813justin]

Nice, enjoy

[@roberttheoldruckercossel]

Awesome - thanks!! Really appreciate you getting to the point.

[@92813justin]

That's what I enjoy doing. It is always the worst when people go on a tangent

[@Ctrlwrp]

Where did you get that oil filter drain cap?

[@rdhudon7469]

I replaced my drain plug with a Fumoto drain valve and so far I really like the convenience .

[@92813justin]

That sound pretty nice!

[@rico989]

For the oil and OEM filter. You can get it from the Toyota dealership correct?

[@scottwilliams5642]

Enjoyed your video first one I saw describe how to reset the dashboard, thanks. I did an oil change yesterday on my 2018 OR Tacoma, the area around the drain plug looks NOTHING like the view of your clearly visible drain plug at 1:40 , what's up? Is it the difference between Sport and Off Road? Mine has a sheet of metal over the area with a small hole I can just reach my hand up into to reach the plug, I cannot see the plug, just had to feel for it.

[@njsongwriter]

Good job. Using torque wrench and giving the torque specs is a plus. A person would have to be a bit anal to find fault with anything you did. However, if you read the instructions on the box that your oil filter came in, they say not to use a tool to remove the o-rings. The concern is after multiple oil changes the groove where the o-ring goes could become damaged. Probably won't be a problem but worth mentioning that care should be taken. The only other thing that was inaccurate was the mention you made of there being one quart difference between the two marks on the dip-stick. Actually, there is at least 1.6 quarts difference and possibly 1.8 quarts. You should find that information in your owner's manual. And we all know you didn't mean "from empty to full". Those marks represent the minimum safe amount of oil and the maximum safe amount.

[@92813justin]

JackTannehillPromoter, thanks Jack for all of the positive feedback. I worked at an oil change shop for a year and they told us it was about a quart or so across all vehicles. Thanks for the specific range from the low to high range on the dip stick. I’ll also remove my o-ring with my fingers as well. That seems like a very small chance but I do not want to take any chances.

[@njsongwriter]

@@92813justin Gotta love your attitude. 😉😊

[@EternallyLost123]

This is a great tutorial, very thorough. Thanks for sharing.

[@brianheuschkel3391]

Thanks for the oil reset and torque specs. Great video.

[@tsjuno]

That oil splashing out happened to me the first time. I bought a fumoto oil drain valve so I can open it half way so it comes out slower. Worked great.

[@92813justin]

I am very temped but have not done it yet

[@jmabs5096]

Ehhhh I know it's probably 0.0001% change that valve would ever fail and the drain location is located in a pretty save spot, however a bolt is safer especially if your off roading. Another point of potential failure (albeit probably next to none) I'm sure there has been freak accidents with thoes valves!

[@tsjuno]

@@jmabs5096 I’ve done a lot of research and haven’t found one person saying it failed. I do carry oil and coolant with me. Along with the original plug just Incase. I don’t even have to Jack it up to reach it.

[@92813justin]

@@jmabs5096 I just bought one!

[@jmabs5096]

@@tsjuno yea it's probably only happens a few times or maybe 100s but people simply don't put anything online about it. I really don't see the point other than saving what... 5 seconds to undo the bolt? Like I said it's probably miniscule to non but as an offroader, stuff has got wedged in places I didn't expect!

[@BH-BH]

Thanks for all the links to the parts!

[@92813justin]

You are welcome

[@bryanr.3241]

I would pour oil in filter before installing. I saw a video of what happens over time by not putting oil in filter.

[@dsc194]

Damn, I hate oil going everywhere. I'm going to do this today, thanks for the heads up.

[@92813justin]

No problem

[@kcd845]

To reduce oil on your hands when removing oil plug, stick a shopvac hose on your engine oil cap and turn on prior to removing plug. When plug is removed, turn off shopvac.

[@westganton]

Leaf blower works well too

[@bigdavedayday1581]

Or just turn your car upside down, then when plug is removed, turn car over, no mess no need for shopvac

[@Manhandle730]

@@bigdavedayday1581 that’s the way to do it!! Let gravity do the heavy lifting for you!! One thing I can think of to avoid, remove any beverages and loose change from the truck prior to flipping it over. No one wants a crappy soda mess in their vehicle!!

[@alexbrack773]

@@bigdavedayday1581 I prefer rotating the whole vehicle 90 degrees. put it up on its side for easy access to the plug and filter housing.

[@digitor24]

Thanks for the info it made the job easy.

[@boblafountaine9560]

Put a 2 liter pop bottle under the filter cap plug and the bottle will catch the excess .

[@josephr.plascencia6201]

Thanks, very informative video, definitely a good video. Thanks again.

[@davidsabo2986]

This guy is awesome 💯

[@seamurda100]

Good video! I'm doing this right now.

[@truthalways247]

Greetings, 👋🏼 I have a 2018 Toyota Tacoma SR5 truck and I wanted to know what should I change if my vehicle has 37,776 and havent changed anything yet and it's a used vehicle from a used dealership? And I found out they didn't do the transmission oil change. The only thing I changed was the airfilter and oil change at the Toyota dealership.

[@yws4645]

Oil change is the most important thing… Every 6,000 miles or so.

[@unknowjr5450]

Where did you find the thing to drain oil from oil filter ?

[@badtraddad9491]

I got mine from auto zone

[@brandonpaulin1595]

When torquing the oil filter cap what size socket to use on that?

[@mattbryant5580]

I’ve got the same oil catch pan and it always splashes out when I change my oil like it did for you. My driveway looks like a rainbow after

[@92813justin]

I ended up getting a bigger one

[@dezdog70]

go to amazon and search for "oil drain pan splash pad" solves issue

[@92813justin]

@@dezdog70 Thank you!

[@DaddyGlez]

U can also put the oil pan closer and it won't splash

[@Nater389]

What Lift do you have on that please? Looks good.

[@92813justin]

1.5" bilstiens kzbin.info/www/bejne/pInLk4d4eduifa8

[@austinpierce8087]

Just an FYI there's a special oil filter puller for the cover I got confused until I looked at your Amazon list

[@92813justin]

Here is the new one I acutually use that is incredible, Oil filter wrench: amzn.to/3H4UTsK

[@americanmilitiaman88]

After worrying about the fel pro gasket I decided to go to the dealer and got 10 oil plug gaskets. Actually received 13 plus a 20 percent "happy discount" . managed to swap the gasket out and only lost a half cup of oil in the process. My worries were correct. It was distorted internal diameter which could be a problem in the future

[@BurtBowers]

Amazes me that vids I been watching on tacomas & camrys say to use 6.2 quarts of oil on the 3.5 ltr motors well for what ever reason it shows 5 quarts to the full mark?

[@allseeingeyezz]

6.2 for the 2.7L

[@alonzoarmendariz6323]

Where do u get lil device that helped u drain the oil where the filtro goes the nobel looking thing

[@92813justin]

WRENCH: amzn.to/37W5SCV

[@matthew53690]

Great vid. But where does the smaller o ring go?

[@americanmilitiaman88]

Oil filter cap said torque to 25NM which is about 18.4 ft lbs and i was torquing and it seemed a bit execssive. I backed it off and tightened it till it stopped and called it good. Also 30 ft lbs on the drain plug squishes down the gasket quite a bit. Is that normal. I used a fel pro gasket for Toyota

[@MisterTwister222]

those look like nice skid plates for the front cross members, what brand are they?

[@sebastiancrabill444]

Good video, you showed us step by step right to the point, your mistakes because of course nobody is perfect and the torque specs, people have told me its a bitch to change the oil but you made it plain n simple...

[@92813justin]

The oil filter is not the most fun, but I have had worst oil changes in my life.

[@jbnremt]

I am looking for a nice oil change bucket that doesn't splash.

[@FerdiGaleon]

Shiiiiiiiiiddd I feel you on that oil splatter man.

[@lellamadaw1721]

Will the oil filter wrench cap you provided in the description be compatible with my 2022 Toyota Tacoma?

[@92813justin]

Yes it will

[@MrNorthstar50]

I liked your video, I have a 2021 Tacoma and I dislike the canister oil filter . I think Toyota did that just to discourage us from changing our on oil , they want to marry us to the dealer.

[@Quokkkkaaaaa]

I agree 100% I’m in the middle of this oil change and I figured it would have been straight forward. Stupid ass oil filter thing is annoying.

[@92813justin]

It has to do with the environmental regulations and cost. Now they are just throwing paper away instead of metal canisters.

[@HsingSun]

How much did you tie the nut back, 30 foot/lb? Do you need to install a small rubber ring?

[@idandamuag9677]

first thing big bro, my oil dipstick is stuck 😂 what do i do i am afraid of pulling it any harder

[@aarongray3573]

Thanks for this. Definitely helpful!

[@92813justin]

No problem!

[@baddriver3580]

Good video Dude, you have my luck when the oil is spraying everywhere from the drain pan! LOL... thought I was the only one with sucky luck..lol.

[@92813justin]

Thank you!

[@Americafirst-i8q]

Damn oil is thin just like cooking oil would do you expect

[@HsingSun]

If the a strong wind blew underneath the truck while you were change oil. I think you could get some oil spill on your face. It happened to me once.

[@Steve_Balboni]

What did you spray on the oil filter?

[@thournmisa4941]

Where did you buy the oil

[@phildern6203]

very thorough well done

[@92813justin]

Thank you

[@dillondeltoro]

Where do you get the plastic drainage piece for the oil filter ?

[@92813justin]

It comes with the toyota oil filter, but I do not use those anymore because they are very messy and oil goes all over your arm. I now use this: Oil filter drain with tube: amzn.to/3kDKnS0

[@teslarocks7345]

What was that tool used to press up in the oil filter housing to drain the oil out?

[@92813justin]

Use this one, it is way easier to use then the one I have: amzn.to/3cVB0Xg

[@broken_font1881]

@@92813justin that's not the tool I think he was talking about.. 🤣 where do you get the little plastic plug that you stick into the oil filter to drain the oil out?

[@HBTFDawgs]

@@92813justin amazon says that will not fit a 2021 taco....is that accurate?

[@92813justin]

@@HBTFDawgs It will fit. DO you have the 4 cylinder? If so, this will not fit.

[@daveb3330]

The plastic piece that drains the oil filter comes with the new filter in the box

[@BabakPA]

Thank you for the video😇

[@campingpilipinas6634]

Bro what’s the tools you use.

[@Politically-incorrect-brian]

What about the skid plate? What are the torque specs on those bolts?

[@92813justin]

Not sure, the techs at toyota are not torquing those any specs

[@donfinkey692]

When did you last change your oil? Looks pretty dirty.

[@jzila9900]

Question ,is there a proper way to pjt the dipatick back in ? Everytime I put it back in isnkindo of scrapes

[@92813justin]

Great question, look at how the dip stick as to bend when it goes into the engine. Have the flat side facing the bend so the dip stick naturally bends. But thats about all you can do.

[@jzila9900]

@@92813justin Thank you!

[@billlumberg5746]

Do you change the oil out every 10k or sooner?

[@92813justin]

5k

[@anthonyc3836]

What is the size of the oil filter wrench

[@92813justin]

@@anthonyc3836 amzn.to/37W5SCV

[@plecain]

Make sure you seat the small o-ring in the groove. If you just put it on the threaded retainer flange it may not seal properly. Otherwise, good video.

[@92813justin]

Great advice. Thanks for sharing

[@drbonefish]

Thanks the first thing I noticed, always put the seal in the groove first, other then that good oil change

[@sunupclips448]

Hey buds I don’t know if I’m wrong or you’re wrong but the Toyota Tacoma takes 6.2 quarts for the 3.5 engine

[@92813justin]

Yes, that is about right for me as well

[@Kana7782]

The oil pan plug gets 30ft lbs of torque. What about the black filter cartridge and the silver cap? How much torque each?

[@TheVolunteerGamer]

Mines says 25ft on the cap

[@Kana7782]

@@TheVolunteerGamer oil pan plug: 30ft. Silver cap: 25ft. What about the black filter cartridge?

[@Kana7782]

@@boonieboy3191 what about the silver cap that goes on the cartridge?

[@steeziewonder69]

Why don’t you prep the oil filter with new oil like you would any old car? I just put 30k on my 2020 Tacoma.. but am used to changing my oil in a ‘98 4Runner

[@92813justin]

You could, the point 2 seconds is not a big deal. What really matters is changing it every 5k miles

[@douglasbaker5949]

Doesn’t the oil change call for 6.2 quarts of oil?

[@williampartin136]

Where did you get the oil filter wrench/tool?

[@92813justin]

Here is the link: amzn.to/37W5SCV

[@lillarry3000]

Where do you buy the plastic for the oil filter?

[@92813justin]

See description

[@israeljohnson2708]

Good job.

[@pinkpeter0007]

I can’t get that metal cap that is holding the filter. Every time I try and get it off takes the whole filter.

[@Oneguygarage]

Awesome help. Thanks

[@luigidi8658]

Great vid

[@User-q6x3b]

I did my 23 at 100 miles because the dipstick was hard to read clean, but it seemed high. It was overfilled around 30oz from the factory. Has anybody ever heard of that happening?

[@erickream6378]

I didn’t know my oil filter was supposed to come with a new drain plug seal can I just re use the old one until the next oil change and then I’ll get a new one?

[@babyfarkmcgeezax7656]

The filter only comes with the o-rings for the filter housing I believe. I purchased a new gasket for the drain plug separately.

[@Manhandle730]

You can but I would keep an eye on it. Every time I’ve bought a filter it comes with a housing gasket and one for the drain plug.

[@powertools2375]

For those of us that have an air damn. Do you need to remove it?

[@92813justin]

You do not, It will be right there when you are trying to loosen the front bolts on the skid plate but you can do it

[@brandonpaulin1595]

For anyone doing this some of y’all might have an extra skid plate over the oil pan. It threw me off at first and I think I almost drained the transmission fluid lol

[@JoseGomez-tj4qe]

Also clean the inside filter area if you see there is a lot of metal in side . With carburetor cleaner

[@92813justin]

Great point!

[@robertritter9018]

Thank you for acting getting a good view of what you're doing. So many viedos just say what to do but you can't see it. So again thank you for putting in the effort.

[@92813justin]

I appreciate that

[@davidh6292]

Does the filter come with seals? Was the filter from the dealer?

[@92813justin]

Filter seals comes with the filter. Most dealers make you also pay for the drain plug seal separately.