#95 PART 2 , ARRMA MOJAVE NEW FRONT SEALED BEARINGS

[@Fr0stBite5055]

When putting the berings back in what is a good lubricant to put inside where the CV axel connects to the bearings?

[@ucrazy2rc460]

Hi , you don't need to put anything in there , it will only collect dirt

[@Fr0stBite5055]

@@ucrazy2rc460 huh that's supprising to me as there was definitely some grease All over in that area from the factory so I was thinking I should probably put a little bit in there at least. I ended up put some silicone lubricant in there I'll keep an eye on the dirt and see if it collects. Thanks for your advice though I've really been struggling to find some good instructional videos on how to do maintenance on this thing! You had the best videos by far for getting to those bearings.

[@ucrazy2rc460]

What would you like to see ?

[@Fr0stBite5055]

@@ucrazy2rc460 I'm not sure yet as I'm new to the hobby. I watched your video because I broke both my front bearings after a jump. I would like to see maybe some general maintenance videos for the Mojave. Or maybe some future upgrade videos down the road. I plan on putting a new heat sink and fans on the motor. Along with maybe the light kit that I found online.

[@billyjones589]

How did you remove the stripped grub screw from the other mojave?

[@ucrazy2rc460]

Found a small drill bit a little smaller than the grub screw and slowly drilled it out , You can try and knock the pin out first ( sometimes you can tap it out )so you can remove the hub and it makes it easier to drill , it's a pain in the butt

[@jeffreyhay2610]

nice job,,, i feel bad for jimmy on doing all that yard work.... if you want me too keep it quiet about stripping that nut on jimmys car its going to cost you i love your videos jeff

[@ucrazy2rc460]

Glad you enjoy them , wife did yard work , we lost power so she needed something to do .

[@masterplanes10]

Pain in the butt when the 5x5 screws strip worst thing

[@ucrazy2rc460]

It is hard to get the damn things out once they strip , but it can be done

[@bbrucet3]

Superglue....

[@ucrazy2rc460]

@@bbrucet3 a little dab will do you