$96 Quad Lock vs $12 Cheap Lock | To The Test Episode #1

[@tri333ple]

Subscribe to our channel for more videos like this! :) We found the link to the cheap lock: s.click.aliexpress.com/e/_DF25Gyr

[@muhammadrusyaidiroslan8056]

any recommendation from shoppee or carousell?

[@thomasstansberry2311]

I like the show 👍🏼 Have a great day guys ✌🏼

[@tri333ple]

Should be able to find it on carousell by searching cheap lock

[@tri333ple]

Thank you Thomas. Appreciate it

[@Manutschki]

Wheee to find the one with vibration module ?

[@zieWRITES]

I am currently using the cheap lock with vib dampener and a quad lock case for the phone. Went through all road conditions, works like a charm. If using the cheap lock adaptor, replace the adhesive with a 3M VHB Tape.

[@tri333ple]

Real life example for you 🤣🤣 thanks for sharing buddy.

[@samskelding2891]

So is it the same exact fitting? I've got official quad lock vibration dampener, will that fit on the cheap lock motorbike bracket

[@ike8236]

So you have the quad lock dampener on the cheap mount?

[@samskelding2891]

@@ike8236 I do now, works well

[@ike8236]

@@samskelding2891 yeah sweet seems like the way to go, still cheaper than just the quad lock mount itself.

[@WestSussexBiker]

I've used the "cheap lock" for over 2 years without any problems but i did change the double-sided tape for 3M VHB Tape. I also tested the "cheap lock" with a 50 mph slide crash and it survived without damage to the lock or phone. Bike didn't survive

[@tri333ple]

ouch!!! thanks for sharing and hope you came out of it unscathed

[@WestSussexBiker]

@@tri333ple Full leathers saved the day. Broken arm and wist with lots of bruises.

[@redmille1000]

@Bikers chronicles how much 3m tape did you use? I can buy a 90x15 mm sample as I don’t need a whole roll.

[@WestSussexBiker]

@@redmille1000 I used 4 little strips of 5mm 3m tape

[@redmille1000]

@@WestSussexBiker cheers for that👍

[@andyandroseadventure]

I used the cheap lock + quadlock vibration dampener, traverse Vietnam from South to North for 20,000km over a month and phone still works.

[@mayazze]

thanks i was wondering if it worked to assemble this way

[@Jakeisks]

a single anecdote is pretty much worthless...

[@rrairr]

Q4 2023: I got the cheaplock (actually called Pushlock here) and it already had a 3M VHB adhesive. It's around 10$ for both mount and cheap dampener. It's currently mounted on my MTB. Only been using for a month though, but so far it really works well and the build quality feels great. On rough riding, it's stable and it holds the phone pretty solid. Edit: the pad is installed on my plastic phone case. If anyone's wondering too; the adhesive's thickness is 1mm

[@sodiumzirconium]

pahingi po link saan niyo naorder sir hehe thanks

[@cghrios783]

Please where do you buy it. Could you link it? Thanks

[@Jakeisks]

I won't trust any adhesive for this purpose, too much risk

[@tomdelozier7206]

I love your tests guys! Thorough, informative, and entertaining. About the adhesive test, for both quad lock pulls, the rope was looped over the mount itself so was not testing the adhesive (perhaps an editing issue), and it actually resulted in a broken phone in the last test. The Cheap Lock had the rope looped next to the mount so did actually test the adhesive. FWIW, I do have the Cheap Lock with dampener, your test gave me confidence in the purchase and its been working well for several months.

[@tommiezabala4331]

This is the most unbiased review I have ever saw, I have the cheap lock, now I am concerned with the adhesive, lol. Time to buy the quadlock accesories for the cheap mount lock 😂😂

[@tri333ple]

Thank you for the comment! subscribe for more!!! 😀😀

[@Ladosligese]

same here Cheap lock with expensive backing OR just the cover wich is even stronger then the stickon backing ..

[@chantakzee]

Just buy a roll of 3m and cut to size.

[@Underdogm3]

Im using the cheap lock as well but I immediately use a 3M double sided tape for the adhesive since I don't trust the one that is included on the package.

[@nas76]

@@Underdogm3 does phone case material affect the stickiness of the tape? my phone case is silicone

[@lukekeddie4209]

Legends, I’ve bought the ‘cheap lock’ and superglued the mount on the phone case😂 working well so far 🤙🏼

[@joepangit6938]

I wanted to see you try the vibration damper on the cheap lock. That should have been the lowest vibration of all.

[@vqfive]

I use the cheap one, and they work really great. Easy to install. I also installed it with the vibration dampener on the cheap one works good. Taken many videos with my phone mounted to the bars with no vibration issues. The mount pad on the cheap one works good if you let it set. I've had it on my motorcycle for 2 years now without any issues. It's never fallen off

[@FlowNeppets]

First time watching you guys. Y'all hilarious! Keep up the good work. For the rope test. With the quad lock, the rope was on the bracket. For the cheap lock, the rope was off the bracket.

[@ckidphotography1318]

I just ordered a cheap lock. Holy smokes I’m shocked. I loved my quadlock on my mtb bike…but by god now I am getting the cheap lock for my motorcycle

[@Jakeisks]

problem is... plastics are extremely different, just depending on the formula. some plastics dry out and become brittle after prolonged exposure to the sun.

[@2wheelsdownunder28]

I use and love the quad lock system. I bought it because it’s an Australian company and I believe in supporting companies in my own country.

[@franc4152]

So basically enjoy making someone already rich, richer. lol

[@oscarfernandoaldana3568]

This videos is absolutely perfect!!!! thanks for testing this, I'm pretty sure a lot of people needed to know this... please keep it going.

[@tri333ple]

Thank you so much for watching our videos, we hope its good info. Sub for more!

[@sumitchauhan6134]

This is channel is so realistic, approach oriented, and amazing, with a huge growth potential. I am subscribed.

[@tri333ple]

Thank you for the sub! We appreciate it. Hope you enjoy the rest of the vids too!

[@sumitchauhan6134]

@@tri333ple Most welcome, but thanks to you guys, learnt a lot about content from you guys, the quality of shots, editing , comparisons , humour, perspectives ( like recording screen view ,such an immersive experience with music , the beats and the excitement, thought process involved in situational awareness context, the team work, the technology side , testing methods . It's really amazing. I really believe you guys will do millions very fast and I will always be learning from here and will be congratulating on every milestone. As an aspiring KZbinr , and life long learner . Pure class you guys are . 💓 and appreciate so much how there is growth from recent videos and it's so inspiring to watch that graph and scope. Lots of Love . Cheers. ( How many times I have edited this comment and reposted it again , as I realized how many amazing aspects I have realized with every analysis) , Do not still have enough words. Thank you.

[@tri333ple]

Hey bro . Wishing u all the best in your youtube career. We've been workijg hard and trying the best we can and a comment like this really motivates us to do better. The entire team has seen your comment and we would like to thank you again for the kind words. We will keep making videos, hoping that people like them as much as you do ☺️

[@sumitchauhan6134]

@@tri333ple Thank you heaps ,and you are most welcome. I'm so glad my comment makes you all happy. I'm honored. I will share my story too one day after coming out all of tough struggles and pain, and what situations in life even made me look at this quad lock Video, I am a very hopeful person but thanks for reinforcing my hope. Thx for motivating. Peace out ✌.

[@zeniezer4726]

Using cheap lock and buy 3m adhesive it works perfectly using almost 8months great product👍

[@tri333ple]

We found that the cheap lock was really decent. 💯😁

[@mikec6651]

Where did you buy cheap lock ?

[@sydznl]

solid reminds me of fortnine with the scientific testing. good job guys!

[@tri333ple]

Thanks buddy. More to come! Like & Share!

[@Tofuandtwowheels]

I have the cheap mount with the Quadlock adhesive clip. It works very well. Will be buying a genuine Quadlock vibration dampener but see you can get cheap versions of that too now. Also, only found the cheap mount because of you guys, cheers

[@jeroenstienstra1409]

Does everything work as shown in the review? And how about quality of the cheap lock and dampener?

[@protambike7258]

​@@jeroenstienstra1409works good i have also

[@AequitasSaints]

Where did you find the cheap vibration dampener?

[@ashtonjenkot8520]

Link?

[@Jakeisks]

I bet the rubber dries out...

[@singaporeseaslugs1393]

the quality of these videos are getting better man, holy shit

[@tri333ple]

Its all for you guys. 🥰 hope you enjoyed the video!!!

[@stitchilalu]

This is exactly what i was thinking, using the cheap mount with the quadlock case. perfect. thanks for doing the test!

[@JosephPlazoLegalForum]

i listen not just because of the awesome content, but because your SG accent makes me laugh. Keep creating!

[@neodecadente]

Amazing video! I was going to buy some huge exaggerated phone mount because SP Connects and Quad locks are too expensive in my country. But now thanks to this video I already ordered a cheap lock and hit the like button and the subscribe button altogether!

[@tri333ple]

Thank you for watching!!

[@lexterHD]

Been using cheap lock more than a year now, never fails. I think the adhesive will based on the surface, if you have phone case the better.

[@Xyros0]

what's the material on your phone case? and are you using the stock adhesive?

[@Yamahog]

Loved it when the Glass case failed.... Still not sure who tied on the rope when you were trying to get Adhesion failure because the rope was tied around the base instead of just the phone case. All in all, this was funny to watch. Yes, Go with "cheap lock" and 3M adhesive.

[@nathanw5747]

2 years ago!, now quadlock has the quadlock/mag safe case that has both buillt in-combo where the lock is built into the case no adhesive stuff to deal with . ! that + aliexpress mounts seems like a complete win! save a couple hundred $

[@franzjosephhernandez7886]

currently using the cheap lock.. and it is bang for the buck!!! thankfully I didnt waste money on the original one..

[@herrarbeitslos7464]

What is the name of cheap lock??

[@Matt-uw9rb]

@@herrarbeitslos7464 did you find out?

[@Klechko]

I have the cheap lock, I have directly stitched the support through my case ! It is rubber so you just need a strong needle and 15 minutes 😊

[@themaximussx875]

Guys, you don't need to buy the expensive quadlock pad. Just buy new 3M double sided foam tape and replace it right away from new. Job done! Thanks for the video

[@tri333ple]

Thanks for sharing!!! 🤭

[@marcoshorta803]

Love this video! I liked and subscribed just because this video was great! I am currently in Brazil, and quad locks are hard to find and expensive, but the alternative is for everyone. I did replace the double-sided tape of the alternative with 3M double-sided tape and haven't had any issues for months! I am very impressed. It is also great to know that quadloack products can be used withthis set up as well. THANK YOU!

[@tri333ple]

Thank you so much for watching!!! We really hope that the video has helped!! Appreciate the sub! 😁

[@herrherher2502]

Do you have a Link for that?

[@Wolfentodd]

The production quality in this is better then like 99% off channels on KZbin

[@azakisma.1.mo_ago]

Please produce more of such content with other things..sure support one.

[@tri333ple]

We will do a monthly series out of this if people like this video! Remember to drop a thumbs up! And help us share the video!

[@lisjak82]

I have the original quad lock holder with the original vibration dampener, but after changing the phone I bought a cheap universal a phone mount, that I mounted on a clear case with a plastic back. After 24 hours of installation, I tried the test of how many kilograms it can withstand and at 12 kg it did not come off even a mm. So I think it is trustworthy without changing the glue.

[@benlim3196]

Damn... This is good content bro.. keep it up man... Totally did not expect quadlock to fail tho

[@tri333ple]

Like we said it might be intentional, as you can see from the final test what happens to your phone when everything holds 🤣🤣🤣🤣

[@AlphaBravo860]

You earned a sub for the interesting results. I like combining things/different products to make the best products. Where on company lacks the other flourishs. Thats why you use multiple products like you did. Very smart.

[@bastyz1]

You could have rev the motor a little for the test, but otherwise the best comparison/test I have seen

[@newfjuice6691]

So seems like the way to go is official quad lock phone case and vibration mount with the cheap lock to save some money...too bad I already have the quad lock one, could have saved a few bucks

[@JagdeepSingh-sy2mh]

Superb review and tests guys! Most appreciated. Saves us alot of money. Keep it up!

[@tri333ple]

Thanks for watching!!! 🤩👍

[@msn83235502]

thanks ! it make me soooooo much confident to order the cheap lock and original 3M sticker.. thanks a bunch mate !

[@tri333ple]

hope you enjoyed the video

[@chrisunderhill8853]

I loved your review and testing. I would like to say the vib damper from quad lock is meant for Higher Rpm vibrations i don't know the specific vibration frequency that causes the camera on the phone to freak out i do know its not below 1000 Rpm. I would like to see that test hehe :) cheers

[@tri333ple]

Amos has since stopped mounting his phone on the bike as the camera has died on him multiple times. he used to mount the phone on the bike everyday when he rides. apparently due to the vibration from the motorcycle :(

[@jojoledesma7303]

Two years ago i watched your video, and today I finally bought the cheap-lock, and because of the Induction charger of Iphone, i bought the original phone case of Quadlock. It actually works well 🤣

[@crankdudez]

WOW! I was pretty much amazed with the test.. Great job bro!

[@2wheeledrocket92]

Have you guys tried the generic version of the vibration dampener? There are versions of it everywhere that’s much less expensive compared to quad locks

[@sheepdog819]

I have both. On my Pan Am I had to get the Ram ball to fit it on my bars. I did not like the low mount as you have it.

[@kevmalone8414]

I already have a quadlock case and mount for my motorbike. Will definitely be buying the cheaplock mount for my bicycle and using the Quadlock case.

[@uberacx]

You guys are hilarious. Fun and informative video. I bought plenty of quadlock stuff. They are good quality but not perfect. Biggest complain is that the armband inside face does not have any gripping material so it slips easily. The locking mechanism is not the easiest to lock but it’s secure. MAG head is useful I bought one for my car. Regular Apple MagSafe is NOT secure enough if you use a case. MAG head has a locking shape so it would never fall off (not for bikes tho). But yes i think the biggest problem is price. Not everyone wants to buy cheap locks but quad locks are very expensive. Buying one set is ok but their philosophy is for user to employ the use of their lock and mount systems for biggest benefits. But by setting prices very high will limit how many people will buy them and how many people will buy.

[@jacoloiso]

I had that cheap quadlock on my setup i' vietnam for hard enduro. All you need to do is add some 3m grey/red tape on the back of the sticky mount. Then it is ultimate. Cheers.

[@kyraxmako]

Thanks for this test! Instead to use the "cheap adhesive" do you think is safe to glue the universal adapter to the silicone case with a thin layer of "Sugru" glue?

[@laurynforster6854]

This video was hilarious, and very informative, thank you guys!

[@thatdudemoe9109]

For the second test slight differences - i would guess it would be due to the mounts being located in SLIGHTLY different areas. The slightest change, angle, grip, position of the mount on the bars could affect the results. That said, I believe THEY ARE THE EXACT SAME! I am convinced!

[@Simlife101]

2 years late but the cheap one work perfectly the only reason I changed to quad lock was due to the ram ball mount adaptor so I can connect to the fuel tank phone mount for ninja 300

[@mathewmurphy1552]

I am part of One of Canada‘s biggest motorcycle clubs and because of your guys video I’ll be recommending them to get the cheap lock. Thank You very much you guys.

[@tri333ple]

Thank you for watching!! Hope you share the vid with your friends 😃 ride safe!

[@chrisgibbs804]

Saving money is nice, but I prefer the quadlock case. It's way more secure, less permanent, and sleeker. If I had a cheap phone cheap lock makes sense, but if my phone is $400 or more I might as well get a solid case/mount system. Swapping a case and continuing to use the same mounts with quadlock is a valid strat,

[@joneinarmattiasvisser6113]

I use the cheap quad lock. Very good. I mounted the adapter to my other phone case with superglue, which has a flat back good for glue. Phone stayed on while mountain biking, never once came like a bit loose or seemed to fall off. Actually rock solid. Quad lock itself is great, but knock of is exactly the same, besides being red instead of blue, but who cares anyways.👍🏻😅

[@ktmjun_8610]

I got one of each, and I love the cheap lock, I use the cheap lock on my Superduke1290 with the quadlock case, and the quadlock with vibration dampening on my dirtbike, cheap lock is awesome for a fraction of the price, get the cheap lock with the quadlock case and you will be good!

[@tri333ple]

have you tried the rest of the accessories? everyone is asking if everything fits haha

[@ktmjun_8610]

@@tri333ple yes, every other accessory fits 💯👍🏼

[@dajosova]

very good and creative video. You guys derved a new subscriber here. congratulations! Cheers from Portugal

[@krooked89]

You guys make really good videos. I enjoy them

[@kingjames7929]

If you go to a motorcycle shop . They keep all the accessories of trade ins and you can dig through and I found my blue quad lock for 10 bucks and a bada$$ cupholder for morning coffee . Was a dream find. And their are 20 more in that box

[@izecubez]

I got a quadlock with their phone case.. Phone has no screen protector on it. There's once I thought I had secured the phone properly, and the phone dropped off from the bike while moving off from a red light. Walked back, picked up the phone, only damage was 2 little nicks on the casing itself. Not a single scratch on the phone. Maybe its time I get the vibration damper too..

[@tri333ple]

Good stuff! If not for the casing think you'd have to buy a new one!

[@izecubez]

@@tri333ple Yup! And you guys wouldnt need to replace the glass back if you had it too I think.. 🤣

[@tri333ple]

@@izecubez sad day.... 🤣🤣

[@plav032]

I went for the cheap lock with a Quad lock case, and its amazing. The QL cases are truly worth the money, very nice and high quality, rock solid protection, feels great in your hands with metal buttons, and I've got the new S23 FE Mag case and its combatable with wireless charging, and most Magsafe products, even got a Magsafe Popsocket wallet I'm running on it.

[@spddd79]

How did you go for the cheap lock? No one here seems to answer the question of where to buy it.. 😂

[@oliverhuddlestone1213]

Amazing stuff guys! Cheers

[@tri333ple]

thank you for watching! hope the video helped!

[@Teckno77]

I've been using the cheap lock with the adhesive pad that came with it and honestly it's rock solid and seems very secure so maybe some cheaper brands supply better adhesive pads than others. Just got a cheap vibration damp mount off Ebay and while it's a bit wobbly it seems OK so saved another £10 👍

[@Muthe824]

Great video guys! Keep up the good work! What kind of app do you use? For the vibration measurement?

[@dudester1245]

Good experiment. Curious if your could also just replace the cheap lock adhesive with better 3M and repeat pull test.

[@tri333ple]

according to the comments they work pretty well!

[@brunocardoso95]

Great video guys! What exactly is the model of the cheap lock mount you guys are using? Planning on getting the Quad Lock adhesive and vibration dampener along with the cheap lock mount, since you guys say it works perfectly. Thanks for the video!

[@tri333ple]

If you are in singapore you can find it on the carousell app. If not. Aliexpress should have it. Not sure about the exact name though 🤭

[@1riflemanray]

The end results were shocking! It would be a waste to buy the quadlock mount (though quadlock already addressed it by making a “pro mount” which is now cnc aluminum made) but we aint spending more money for a mount. Imma get a cheaplock mount with a quadlock case specifically for my iphone (they make cases for iphones, samsung galaxy, huwai/pixel phones). Thanks again for well made unbiased review!

[@theinvisibleeye6780]

good tests. only thing i would say is you needed to rev the bike to some RPM when testing the vibration.

[@manuelleos1007]

Got both quad lock and the ebay knock off. They are very similar in construction. I kept the knock off and sent the quad lock back. So far it's work flawless using the quad lock 3m adapter on my phone.

[@tri333ple]

Thanks for sharing! Ride Safe!

[@manuelleos1007]

@@tri333ple saved me some $$$

[@Xyros0]

yo bro what's your phone case made out of? aparrently it needs to be plastic (without a coating) or metal. is it really THAT important?

[@manuelleos1007]

@@Xyros0 mine is just a regular case I assume plastic it's a Otterbox brand nothing special.

[@philipgoldinger1465]

One thought on the cheap lock. Cheap products have very little quality control (like a very popular, very cheap tool company.) So there is likely to be more variability in the products that make it through and get sold. So the one tested may be indicative of 90% of their mounts sold, but what if you get one from the other 10%? To protect my expensive phone I'll trust a brand with a good reputation. There are times to save and times to buy piece of mind. Protecting something expensive or safety fall under the second category. Just my thoughts. Thanks for the great video; informative and entertaining both.

[@tri333ple]

Thanks for sharing! Agree with what you have just said!

[@JM-rp9qf]

You don't think they're made from the same factory. Cmon man! You're better than that

[@JohnL-m2l]

For the chance that 10% of them are defective, attach a lanyard to your phone and secure it to your bike. If the mount fails, your phone will still be with you.

[@gtaloony]

Ive had the cheap lock for one day and it broke. My phone was in the middle of street. Im lucky It didnt break and another car was far behind.

[@paulhaskin73]

Proper Quad Lock iPhone case and the cheap mount and vibration damper on the bars… perfect set up! 👍🏻

[@raczyk]

Is the knock off dampner just as good as quad locks?

[@paulhaskin73]

I would say so… I’ve one on my motorbike for the last 12 months or so and my phone is fine. Just remember to invest in a original quad lock phone case- DO NOT put that sticky pad on the back of your phone, it will come off!

[@tazui1982]

One more setting you have tested, offroad. If cheap lock survives offroad then it's good otherwise not worth it. I have Lobboo phone mount and it survived quite a few offroad sessions so far.

[@Portuguesewowplayer]

Ok thank you! i was about to get the Quadpro but honestly for the kind of ride that i do it seems that the similar model will be more than enough!

[@vagautohaus4492]

some of the times the adhesive test was done, the cord wasover the actual lock, not the phone..so it looks like it tested the lock mech, not the adhesive at those times

[@IAMFirdaus]

Using the cheap lock+QL Iphone case & vibration dampener..works like charm..no need to spend on the QL..thank u for the video comparison..help me save a lot of money😂😂😂

[@filipelima9012]

May you please provide the link to buy the cheap lock?

[@michaelwomack9256]

Great video @tri333ple. Do you know if the quad lock vibration dampener is compatible with the cheap lock mount?

[@etuclerrad5632]

Nice review guys Quadlock vs the Cheaper one😁😁😁i currently using the cheaper ones they call it pushlock 😁😁😁 i bought it only 200pesos or 4usd more or less and i put the quadlock vibration damper that i bought for 1000pesos 😁😁😁😁 i should say that pushlock is the cheapest alternative cp holder mount and i use it for almost 8months without any doubt 😁😁😁 godbless sir

[@tri333ple]

Thank you for watching we hope the video helped!!

[@petzkhie]

Quadlock comes with their case and It's just so expensive when changing phone models. Thanks for this I will just have to buy Cheap Lock accessories for arm bands to belt clips haha

[@ResmeN]

Great video. I just received the cheap lock to use on my bicycle. Like you suggested I'll buy the quad lock universal adaptor and have the best of both

[@tri333ple]

Thank you for the kind feedback! Hope you liked the video!

[@mikec6651]

Where did you buy the cheap lock ?

[@Emtbtoday]

I wanted the quad lock till seen the price then see this cheaper one its still going strong all i done was buy some 3M tape for the mount amd holds up perfectly with the cheap mount and damper

[@timrhind]

It will be interesting to see whether one is more UV resistant than the other. I have had my quad lock for three years now

[@smoke05s]

I'm a plastics engineer and it looks to me like the Quadlock uses more expensive glass filled material and that's why it transfers more vibration. But at least in these tests unfilled material in the cheap lock performed more desirably and dampened vibrations better and is still strong enough. For sure there is more engineering in the Quadlock so there probably is a breakaway feature on the quad lock because of the stiffer mount material. "Breakaway" meaning either the black quad holder is a little smaller than the cheap-lock or the material has more flex in it. (or simply the cheap-lock missed that dimension when they copied it) Bottom line It is what it is. You have to make the call if you would rather your phone break away and slide or stay with the bike and get ground down maybe.

[@2.Wheel.Explorer]

Best combination and saving for the bank account is to use the quadlock phone case (dropped phone a few times from several height and phone is still working) + cheaplock mount

[@be_wld]

Just to point 1 thing about the Last test part when adhesiv broke up ... the rope wasn't placed the same way at first attemp on cheap one compared to quad lock 🤔😏

[@FUUUUU1111]

Are you the only one spotted it??? Lol. That makes 30kg load pure bs.

[@be_wld]

@@FUUUUU1111 il don't know... i use an aliexpress one myself and so far on Z1000 full speed nothing move

[@tri333ple]

Did you guys not see us re do the cheap lock test just to tie the rope at the same spot?? 🤣🤣🤣

[@be_wld]

@@tri333ple i did but didn't specified if you used à new Phone glued patch or the same one... about What i undestood you used same one that get to become less efficient unless removed with heatgun PS ... i Was talking about the adhésif part 😁 ... i use à cheap one with S21 ultra 😆 and am pretty satisfied with both cheap part's

[@tri333ple]

@@be_wld hahaha anyway thanks for watching and we hope you enjoyed the video. We tried our best 😄👌

[@66wildrose]

i got original quadlock jacket (no sticker) and cheap lock mount - works a treat

[@rebeccareeves8605]

Wish you guys could test the vibrations while riding on streets?

[@maircury]

I didn't understand the anti vibrations : What is the best : the cheap plate with the 3 Quadlock Dampeners ? Many Thx to anyone for answers

[@alphallama5586]

subbed thanks for a no BS review

[@tri333ple]

Thank you for watching and leaving a comment. 👌👌

[@980ad5]

Thank you for providing such a helpful review of these two locks. Based on your recommendation, I purchased the Quad Lock for my XMAX 300. However, now I regret getting involved in the Quad Lock ecosystem. Haha!"

[@mandaragatfishermanmotovlo3811]

I use quadlock as well there phone case but im not empress vibration is still there😩so i try the cheaper one im amaze it holds properly and did not vibrate...what i did in the is i preheated first adhesive before i put it and hold very well i run 132kph and its still hold...if you have a money go for the quadlock but if you dont have its better the cheaper one...the end of the day no body will look at it😊

[@EddyStyl3s]

when you crash on a bike the handlebars will most likely come in contact with the ground so your drop test doesnt really complete the test you are basically testing riding along and then suddenly coming to a complete stop.

[@bikesandwrenches]

Great video. You guys are great!

[@tri333ple]

thank you for watching buddy. hope you enjoyed the video

[@willurban837]

Heheh loved watching this test, you are very entertaining!

[@adriansmith1824]

I’m using a fake quad lock with a real quad lock case, funny enough the case was more than I paid for the lock itself lol. I live in a 3rd world country (UK) and the anti vibration works amazingly well (also needed) with the ridiculous amount of potholes here

[@mnansyah]

Good test... can you test comparison between quad lock vs garmin lock

[@ajrob1224]

Use the cheap one , cheap adapter with 3M tape included on tha package without any dampener for over 1yr now without any problem. i tried using with my Blackshark phone, iphone 13 pro max and my oppo phone. Didn’t have any issues with cameras or the phone itself. Btw i use lower CC MC. Honda PCX 160cc i do long rides most of the time.

[@tri333ple]

apparently the bigger cc bikes will cause damage to the newer phone cameras. :(

[@vecioalpin8998]

As a biker I can tell you that the experiment should have be done on the move NOT like that. On the road u add the engine vibration to the movement itself and the attrition on the road, It can make a lot of difference. For the rest nice job! Well done!

[@tri333ple]

We tried our best 😃 . Thanks for watching and we do appreciate your feedback! Maybe in the future we can do it differently if we ever do it again

[@A_Pt_9298]

Do as I'm doing, using Tesa double sided tape with the cheap quad lock copy, cheap and holds 👍 I'm using it with my motorcycle so this tape is also fuel resistant

[@tri333ple]

Thanks for the feedback! Sure it will help other riders!

[@cameronjackson8140]

Excellent comparison! Does anyone know if there is a Motorcycle - Fork Stem Mount Pro version like Quad lock but the ""Cheap Lock"" that will help save the wallet 🤑🤑🤑🤑🤑🤑🤑

[@Floppydonkey]

Found your channel from this vid. Love your content.. subbed! 👍🏼👍🏼

[@tri333ple]

Thanks buddy! Welcome to the channel!

[@eLu2198]

You guys have great vibes! I had fun watching this.