Ihope this helps someone down the road! Created with Movie Studio
Пікірлер: 94
@hhunta4 жыл бұрын
87 is 2 turns out, (88-89) is 1 3/4 turns out, (90-91) 2 turns out, this appiles to 2wd or 4wd. Later models are different. (92-96) 2wd only is 2 3/4 : (97-98) 2wd only is 2 7/8 : (92-98) 4WD 2 7/8 and finally a (91-98) LT-F4WDX is 2 5/8 turns out.
@davekana83884 жыл бұрын
Thanks for taking one for the team, have a 94, now I see what to do, thanks so much, Dave!
@GoKartsorGoneFishin4 жыл бұрын
That makes my day..thanks for watching Dave!
@davekana83884 жыл бұрын
Go Karts or Gone Fishin, you made mine for sure, thanks again, Dave!
@1lilredfox3 жыл бұрын
sure nuff did help me. in many ways. taking out that rubber manifold... OH MY... i see why you did show that...i wound up telling it a thing or 2... let it loose at the block n slid it up. pushed that dagum rubber tube n shoved it down n twisted it sideways... naturally the hard way. n pulled it out how it come... gigl... i done rebuilt many carbs n never like this... come to find the floats in the bowl are... Um... how to say. resonated SOLID... aint no floatin to it. there seized up solid by the resin. yet the float needle is the only part moving freely... yes. this quad has been setting years. godda go watch ur part 2. thank you for all you've taking your time to do, and continue too
@GoKartsorGoneFishin Жыл бұрын
Just saw this..glad I was able to help
@rickybobbyinc2935 жыл бұрын
I’m about to rebuild a 98 LT-F 250 2wd carb and it was nice just watching you do it first. And I love the pain of taking the carb to airbox rubber tube out.
@GoKartsorGoneFishin5 жыл бұрын
They are great machines..thx for watching..and my goal for this video was to help one person...and your the second..so thank you friend for watching!
@brennanwhite98722 жыл бұрын
Great vid. Really helped me rebuild my ‘99 quad runner mikuni. Thank you!
@brennanwhite98722 жыл бұрын
My mix screw was about 2.5 turns out. Maybe a touch more than that
@phoenixarizona84413 жыл бұрын
We have twin quads awesome video thanks for sharing your Quadrunner looks like my 1997 Suzuki Quadrunner 250
@GoKartsorGoneFishin3 жыл бұрын
They are awesome machines!..thx for watching Friend
@hansbaumeister69573 жыл бұрын
Thanks for an awesome video! It sure helped me to clean and rebuild my carb on my ‘87 !
@GoKartsorGoneFishin3 жыл бұрын
These kind of comments make my day...thx friend
@REAL_LIFE5 жыл бұрын
😂😂 I love your air screwdriver zinnnng thanks for sharing!
@timwion1103 жыл бұрын
Thank you sir, i was trying to figure out how to idle mine up, the little screw thingy on the right side that is attached to the carb is the key.... thanks again. T
@freezerburn042 жыл бұрын
Nice write-up, I’ll be using the howtoo soonly👍🙏👋
@bubbzification5 жыл бұрын
Great job bro. If that carb is like the 250, that choke bolt is plastic. If so it’s worth mentioning that everyone should be very careful on reassemble to not cross thread.
@GoKartsorGoneFishin5 жыл бұрын
It was plastic..and a b word to get back in..good point bro..and it is a 250...thx for watching billy!
@bamamowersgarage89375 жыл бұрын
Great job on the video nice to have a good how to videos keep up brother
@davidjohnson65885 жыл бұрын
Nice Job and Great Video!!!! I know it will help more than a few people :)
@DannyWalker19493 жыл бұрын
I bought one of these brand new......I loved it, I wish I'd kept it too.
@GoKartsorGoneFishin3 жыл бұрын
Ya they are great bikes..thx for watching!
@heimlichhotrods5 жыл бұрын
Awesome video bro 🤘🏻🤘🏻I’m positive it will help more than one person good show 👍👍
@davewright15654 жыл бұрын
I just bought a 1990 with 900 miles it was garage kept all its life it looks brand new
@phillb92 жыл бұрын
Thank you for sharing this. It was very helpful.
@GoKartsorGoneFishin2 жыл бұрын
Comments like these make my day...thank you for watching
@enigmatube54374 жыл бұрын
Good job. These CV carbs have an emulsion tube, that’s what the main jet screws into, the slide guide needs to be remove so it can be cleaned. The top baffle needs to be tacked apart and cleaned
@GoKartsorGoneFishin4 жыл бұрын
Thx man..ya I am not a mechanic by far, but I looked for a video on this rebuild and couldn't find one..so I did my best..thx and friend!
@davekana83884 жыл бұрын
Go Karts or Gone Fishin, same here, you helped me!
@mikewynn76882 жыл бұрын
You didn’t show how to put the new long needle valve in. There’s a little plastic washer or spacer in there
@MrClayblasdel5 жыл бұрын
nicely done, relaxed style
@WaynJul5 жыл бұрын
Sounds like a smooth running motor. My generator won't start after sitting several months. Thinking a gummed up carb.
@GoKartsorGoneFishin5 жыл бұрын
More than likely..try draining the old gas out..put new gas in and put some fresh gas down the carb..if you can get it to start it might clear up..if you have any questions dont hesitate to ask brother!
@davekana83884 жыл бұрын
Go Karts or Gone Fishin , think I’ll try that first as well, cool!
@TCMOutdoors5 жыл бұрын
Great job Nate!
@crazedgoldminner7384 Жыл бұрын
Yeah I took it off and rebuilt it and put it back on had a few issues to get back off adjusted it put it back on impossible to adjust from the bottom without that bent screwdriver that's been $18 for and then I found out it was easier to pay $36 and buy a brand new carburetor on Amazon
@GoKartsorGoneFishin Жыл бұрын
Right on...that's how it is these days..thx for watching
@hhunta4 жыл бұрын
hey man be careful with the oil on the diaphram. Have you ever removed the bowl gasket and got oil or wd 40 on it and it will swell and be to big to fit. i would not put any oil on the diaphram's edge, if you do, do not let it sit and swell, immediately put it back in and tighten screws on the cover. once again it will swell
@GoKartsorGoneFishin4 жыл бұрын
I have had this problem..hopefully everyone knows better..thx for watching friend
@jeremyhelm28333 жыл бұрын
Is there anything that can be safely applied to the diaphram which will help keep it flexible, prevent dry-rot and extend its' life? Like you said... probably not anything oil based. Maybe pure silicone grease or something like that? Thanks
@jaymoge3 жыл бұрын
Thanks buddy, I just got a 1995 4x2 for $675 and the idle valve is clogged. This will help me a lot.
@shawnlamon57004 жыл бұрын
Could you put the part numbers of everything you used if you can
@GoKartsorGoneFishin4 жыл бұрын
Man that was years ago..I dont have any of it..sorry man
@shawnlamon57004 жыл бұрын
@@GoKartsorGoneFishin no problem thanks for responding
@JohnWheels5 жыл бұрын
Great work!
@azcatfan35445 жыл бұрын
Thanks man! Much needed!!!
@dw49404 жыл бұрын
Good video!
@GoKartsorGoneFishin4 жыл бұрын
Thanks my friend!
@AlaskanBallistics3 жыл бұрын
Thank you for the video. Hopefully this helps me get a moose or caribou out
@GoKartsorGoneFishin3 жыл бұрын
I hope so to brother..let me know if you have any questions
@AlaskanBallistics3 жыл бұрын
@@GoKartsorGoneFishin Will do guns nothing is my thing not working on vehicles. We think the carburetor is OK with just replacing the battery in sparkplug 1st
@AlaskanBallistics3 жыл бұрын
Do you have links to your rebuild kit?
@GoKartsorGoneFishin3 жыл бұрын
@@AlaskanBallistics no man I sure dont..this was before I knew how to do links...sorry Friend
@GoKartsorGoneFishin3 жыл бұрын
@@AlaskanBallistics always try the simple stuff first
@DigitalENCOM5 жыл бұрын
Where is the oil change or Part 2 at ?
@GoKartsorGoneFishin5 жыл бұрын
Shortly after this video my computer crashed and I lost all the footage..sorry again
@hhunta4 жыл бұрын
That's what is in my Clymer manual
@Bladehunter075 жыл бұрын
Nice one
@ronsmith50043 жыл бұрын
Where does that tiny o-ring go that is in the small zip lock bag with the spring? Does it go on the needle valve that has the spring?
@GoKartsorGoneFishin3 жыл бұрын
Ya ...I think it is the needle outside of the bowl..should be a groove that the o-ring rest in..hope you get iy
@ronsmith50043 жыл бұрын
@@GoKartsorGoneFishin ...Thanks for the reply. That's where I ended up putting it. It seems to running fine. Mine's a '96 too. Thanks again.
@DigitalENCOM5 жыл бұрын
Another question is the position of the choke on the left handle ? What position is up and down on it for ?
@GoKartsorGoneFishin5 жыл бұрын
Yes it's on the left side and you push it away from you
@dw49404 жыл бұрын
Pull toward you for choke and off is away from rider.
@alsouthern71905 жыл бұрын
I have a 1999 250, 2wd. 1st time owning one and need to find the idle screw, any help would would be great!! Thanks!
@GoKartsorGoneFishin5 жыл бұрын
If you look at 907 when I pull carb out...the line that goes under the bowl with the screw end...that's the idle screw..its on a 8 inch long flex able tube..hope this helps
@alsouthern71905 жыл бұрын
@@GoKartsorGoneFishin Thanks much!
@DigitalENCOM5 жыл бұрын
What kit did you order and from where to rebuild it ?
@GoKartsorGoneFishin5 жыл бұрын
The guy that I got it from bought the kit..man I'm sorry I cant help you..its been a long time since I filmed this video and I cant remember..but I think on this model you just pull the choke out..sorry again
@mikewynn76882 жыл бұрын
It was a shindy
@fredprice11635 жыл бұрын
Could you tell me where the hose on the bottom of the carburetor goes
@GoKartsorGoneFishin5 жыл бұрын
It's a a drain hose friend..just hangs under the bike..thx for watching
@fredprice11635 жыл бұрын
Thank You ! Tried to tighten screw but gas keeps dripping out .Would it be some sort of seal on end of side screw .
@GoKartsorGoneFishin5 жыл бұрын
Ya the o ring most be bad ..you can plug it for temporary but I would definitely look for the correct o ring..
@fredprice11635 жыл бұрын
Thank You Again for your fast Response !
@GoKartsorGoneFishin5 жыл бұрын
Anytime friend
@player19975 жыл бұрын
Is there a clutch lever? Because I always switched gears without using any of the 2
@GoKartsorGoneFishin5 жыл бұрын
No I don't think it does..semi automatic..damn good quad..thx for watching
@player19975 жыл бұрын
Go Karts or Gone Fishin Thanks for the answer buddy!
@bluegrassadventures82274 жыл бұрын
Whats the part number for the whole carb
@GoKartsorGoneFishin4 жыл бұрын
🤷♂️
@stevenduffey53134 жыл бұрын
Helped me out
@Asapfishing15 жыл бұрын
That looks awesome!!! I just uploaded a new video!! Go check it out👍🏼💥🐟
@bobybobbison5 жыл бұрын
You need to lube your air filter, it's not supposed to be dry.
@GoKartsorGoneFishin5 жыл бұрын
Didn't know that friend..I will let the owner know..thank you!
@arberfilms23022 жыл бұрын
You don’t need to do that, the atv I own now had someone who messed with too much tacky grease for an air filter. It ended up sealing the expensive carbeurator shut and locked up the throttle at one point. I have a new OEM carb but I would’ve reused the old one if no one put any oil or anything in it.
@bobybobbison2 жыл бұрын
@@arberfilms2302 Tacky grease? Air filter lube isn't tacky grease unless I'm not understanding your response. Lubing the air filter so it's not dry and will actually trap the fine particulates of dirt is what I was talking about.
@arberfilms23022 жыл бұрын
@@bobybobbison it gets dirtier with oil in the filter element over time. Also whoever messed with my machine didn’t know wd40 should only be used a a filter oil. Anything else can get sucked into the carbeurator and cause severe damage even to the engine if it’s bad enough.
@bobybobbison2 жыл бұрын
@@arberfilms2302 Wow, that is really not true, 40 years professional experience and never once have I heard something like you're saying. I totally disagree with you, of course it gets dirtier, that's what it's for!! So all the OEM companies that sell foam filter oil must be insane? Foam air filters are to have oil kneaded into them, don't listen to this guy "Arber Films2" WOW his comments are 100% false. I've owned probably 1,000 for motorcycles and I've never heard anyone say anything like "you shouldn't lube foam filters, that would mean they would catch more dirt" WOW!
@myronlaidler80344 жыл бұрын
10:38 main jet(high speed) not low end! and you didn't check float height on reassembly ,rookie mistake...
@GoKartsorGoneFishin4 жыл бұрын
Never said I wasnt a rookie..never even touched one of these carbs..thx for watching friend