97 Ford ranger replacing windshield wiper sprayers

[@TroyWarr1980]

I just finished this. Driver side was pretty easy as you mentioned since it's accessible (though fairly tight) behind the wiper motor. On the passenger side, I was able to go from the top, grabbing the nozzle with vise grips and gently tugging it up and out, breaking the clips. That leaves just enough slack on the attached rubber line to clip it (or otherwise hold it from retracting back down into the hood) while you pull out the old nozzle. If you're careful and don't let it slip, you can swap in the new nozzle and clip it back into place without having to get to it from underneath.

[@theotherside001]

Excellent man! Thank you so much! I am just fixing to tear into my 2007 ranger and your video has just saved me a ton of work, especially part locating and fit of the part. Excellent detail instruction! Thx again

[@amberericjones5694]

Your welcome 🤗

[@Crappie_Day]

super helpful! thank you.

[@budsodalsky]

Nice! I have a mopar truck I need to do this on! Thanks for the video

[@amberericjones5694]

There are no vids or forums explaining how to do this so I decided might as well make one

[@budsodalsky]

@@amberericjones5694 Man, you make all the right videos for my situations! You saved my bacon on my 3.1 - rebuild - I studied all of them as I went - You were EXCELLENT on how to adjust those valves! Not one noise coming from under there! I wish I lived next door to you or could meet up - im in TN are u in Ark?

[@amberericjones5694]

@@budsodalsky I am in Arkansas central ark. To be exact

[@budsodalsky]

@@amberericjones5694 im in Chattanooga

[@amberericjones5694]

@@budsodalsky you not too far from me.

[@fabianheuver]

Hey man say in one of your fist vids that u had a T-top leaking problem. Will you in the future be making one video on solving it? Im wondering if you will be replacing tho whole weather stripping or if you have another effective not so expensive fix. The strippings where i live are like 300 euros minimum.

[@amberericjones5694]

It'll be along time before I get to those. T top seals are Hella expensive here in the states... I'll probably do all the seals once I start restoration process. But that's gonna be a long time from now. But you will need to strip the weather stripping off clean the surface extremely well. And lay in a thick bead of sealant they make for weather stripping. And lay the seals in. Once the seals are on I've heard ppl just lay the t tops down on it don't lock them just let them rest on the seals to help form it some. Then about few days lock them down.

[@fabianheuver]

@@amberericjones5694 Awesome man! That was a really fast reply. Until the time comes in the future in which you will take on this topic i will be here keep it up!

[@amberericjones5694]

@@fabianheuver I try to do my best to keep up with all of my followers on here. And iam also on tiktok as well @Ustabemweslabem

[@amberericjones5694]

@@fabianheuver I'm trying to build a 5.3 ls for my car too money tight at the moment trying to gather jobs and put food on the table and gas in the cars life's a bitch sometimes lol

[@fabianheuver]

@@amberericjones5694 Tell me about it man. You'll manage! See you in future vids no rush at all

[@danielromero1890]

Hello I have a question how to put out the wiper sprayers?

[@amberericjones5694]

Are you asking taking them out?

[@danielromero1890]

@@amberericjones5694 yes, I did whit a knife thanks for answering

[@amberericjones5694]

@danielromero1890 I used a flat head screw driver and gently lifted up I think I also used a pick to collapse the tabs a bit

[@Bhdobbs]

What was the part number for the nozzles?

[@amberericjones5694]

58166

[@Bhdobbs]

@@amberericjones5694 thank you!

[@amberericjones5694]

@@Bhdobbs yw

[@amberericjones5694]

14 1/2 inches not ft. On the hose 🤦