99 F250 ZF6 - Heim Joint Clutch Pedal Modification

[@michaelcavanaugh5852]

Hey Tristan I just bought a complete clutch pedal assembly from 1A Auto on line for $180.00. I hope this helps. Thx Mike

[@patriciareynolds2729]

my 92 f350 also had bushings worn out, dropped down and wallowed out the hanger. brake pedal bushing on other end ! started to remove seat and do it right, but shortcut it , miked hanger bushing, ordered copper bushing amazon and tightened into hanger behind splined shaft. bushing had coller to contact arm to clutch cyclinder arm.

[@dsruddell]

good job but now all that force is riding on that set screw vs the rod bottoming out in the new heim joint with the set screw just holding it in place

[@savagepete1983]

Thanks for this. I'm getting ready to do this similar mod on my M5OD's clutch MC.

[@darrylmcleman6456]

Good to let the setscrew thru into the pushrod. I am having similar grief with 98 Ranger. Where there is a will there is a way.

[@johnmmm]

Need more lighting at the workbench too much shadow, good pieces of information.

[@superchargedpotato]

At 23:00 when he shot the rod out of the slave cylinder and acted like nothing happened. Lol

[@tristanlee85]

Colt Troxel who needs it anyway, right?

[@ridgemanyt6154]

Nice job! It was great seeing the entire assembly out in the open... the one I'm dealing with the pin that sticks out from the pedal snapped off, I think I'll buy the pedal assembly and remove the pedal... reinstall on the existing bracket. thanks for the video!

[@eczmead]

Save time as these are available on eBay setup to bolt on and go without modifying the joint at all. Time is money. Can be done without taking out complete pedal assembly. Looks like this is taking all day and night to complete the project. Still good info if you can't get one from eBay.

[@tristanlee85]

You most certainly can get them on eBay already modified, but locally was 1/2 the cost and no wait. Doing this in the truck is absolutely possible, and I would have went that route had I not decided to make a video on this mod. It was ~45 min job with the video and explanation. Had to break up the work for other daily activities. :) Appreciate the feedback!

[@MRJPP2U]

Friend, I can hear you say 10mm on the bolt and heim, could you give the leingth needed for both? Kind of a parts list???

[@ridgemanyt6154]

got a link?