9th gen Civic horn upgrade

Finally got the new horns installed on the Civic. Join me as I do an install video if you want to follow along for your own 9th gen Civic.
Negative comments will be deleted, I do this for fun please do not post negative comments.
Car: 2013 Honda Civic
Camera: Nexus 6p in 4k
Driver: Koree
Computer: 2011 MacBook Pro
Software: Final Cut Pro X
Follow me on
Instagram: @koreec
Twitter: @koreebro

[@nickm.7239]

Just saw this video! Totally agree the stock civic horns are horrid!

[@funnypranker34]

Hey thanks for the video. This generation of civics are awesome for easy access to the horn (8th and 10th gens require bumper removal). Im gonna change my horn in my 2014 civic with a factory 2003 acura TL type s horn, I determined it uses the same connector so thank god i got the right one at the junkyard yesterday

[@funnypranker34]

well it worked, no mods needed. The plastic shroud is in the way cause i needed that back on. Ill probably take it off later but take a listen: kzbin.info/www/bejne/gJfMdZ-gZ9KVqdk

[@jamestone265]

If your wanting to do this on a 2015 gen 9 COUPE it’s nothing like the sedan. You can just barely remove a soft plastic shield and the wedge up the grille top shield to do the install. The horn mounting straps need to be bent and one can be bolted to the original wire securing clip hole. There is a grounding cap screw 10mm and the horn mount is a 12mm. I used a 1/4x20 3/4” long with a star wash and nylon looking nut to hold the left one on. Hopefully my included photos will show what worked for me.

[@jamestone265]

Sorry can’t figure out how to load photos

[@dgoss1337]

wtf, didn't even honk the horns once. Also, the plastic shroud/ cowl helps direct air flow over the radiator. I wouldn't leave it off.

[@OrlandoDrivers]

Drew Gossett it's been off since I posted this video, no issues with airflow.

[@jamestone265]

It’s there to force all he air thru theAC condenser and radiator. I too would never run without it. Is a 2015 a gen 9?

[@brobb-sd9vp]

Thanks for posting this. I can't stand the meep horn on my 13 Civic. What gauge wiring did you use for the splicing?

[@OrlandoDrivers]

I actually ended up using a universal horn kit. It came with all the wiring and the relay. I still am trying to figure out where to mount them. At this point this video is irrelevant. lol www.amazon.com/gp/product/B00XM107FC/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

[@knowbodiesfull5768]

That "beep" sounds more like "cheap.". It's a cheap-sounding horn.

[@TheSteveo1374]

You can always trim out the area above the horns and mount the plastic piece

[@ELLExVISION]

That plastic is there to keep all that hits your grill from going into your engine bay.

[@nlaosmlennon7116]

Thank you👍🏽

[@tagaford]

I did the same thing for my 8th gen.. hate the meep horn. However, I just ran the ground through the bracket. My horns that I purchased came with a wire connected to an o-ring.

[@maxwellweiss9849]

We all came here to install the dukes of hazard horn didn’t we?

[@ELLExVISION]

Get yourself a tugboat horn and hook it up,or maybe a foghorn.have fun

[@sammygingello]

Do u need dual horns? Cuz I thought the stock Civic only came with one???

[@dalegribble3684]

It does but they sound mousy

[@lucaluca6439]

I think the best thing to do is just extend the bracket make it longer i’ve done that on my car 2017 Honda Civic

[@michaelduchac2742]

I mean you didn’t even blast these once in the video? Could a been a great plug for the horns..

[@vogash]

can you send me a link to buy it, thanks

[@feliiiik]

Did you ever blow a fuse since your tapping into a single power wire for both horns?

[@PhotographerPhilosophy]

I have not had that problem, however I just added a high tone to my factory low tone about a week ago.

[@lesio333]

No relay needed? Could you post link to the new horns?

[@pennywise134]

I've seen reports that the 9th gen Civics have 2 stock horns (1 down by the driver side fog light) Did yours not have a second one?

[@OrlandoDrivers]

No, mine only had one.

[@PiranhaJaw22]

now you have a clown horn

[@BetonCaron]

The two horns won't draw too much juice from only one wire? Thanks a lot I'm doing the job on my 8th gen.

[@OrlandoDrivers]

Olivier Caron I ended up adding a harness to it. Wasn't enough juice to power both.

[@BetonCaron]

Orlando Drivers can you share more details please? [e-mail]

[@cameronsmith8986]

You wanna use a 5 pin relay. I uploaded a video of my swap on my 2015 civic

[@jeffroth6575]

We’re did you get the space connectors at

[@ryanbruns4217]

i wanna change my horn but it's behind the bumper which means i have to remove the bumper, the grill, the headlights, and losen the fenders... it's a really dumb design on kia's part

[@AustinRopa]

😂😂😂😂

[@AmaniLindsey]

Got a link to the horns?

[@OrlandoDrivers]

Amani L HELLA 012010801 Blue 12V BX Trumpet Horn Kit (Universal Fit) www.amazon.com/dp/B01EG18KCS/ref=cm_sw_r_cp_apa_i_9RMgBbPPECF7G

[@AmaniLindsey]

Thank you good sir!

[@jeffroth6575]

Why don’t you mount the other horn on the right side of the car then you can put the grill back on

[@yousefalisy8091]

Can you install only one

[@OrlandoDrivers]

Yeah, 2 is not required.