TP-Link Deco X20 review: Easy to use WiFi 6 mesh system for the whole house and some of my yard

[@pomeroytv895]

WiFi in a detached garage is going to be a game changer for me.

[@drewprinceton8659]

sorry to be off topic but does someone know a trick to get back into an instagram account..? I stupidly lost the account password. I would appreciate any assistance you can offer me!

[@sincerestanley6499]

@Drew Princeton Instablaster =)

[@drewprinceton8659]

@Sincere Stanley thanks so much for your reply. I found the site thru google and Im waiting for the hacking stuff now. Takes quite some time so I will get back to you later with my results.

[@drewprinceton8659]

@Sincere Stanley it worked and I finally got access to my account again. I'm so happy:D Thank you so much, you really help me out :D

[@sincerestanley6499]

@Drew Princeton no problem =)

[@EternalWar4]

What u can do to better demonstrate the wifi connectivity between the mesh points is that start a wifi speed test and then start walking one mesh point to another

[@deepakmurugaian2203]

Is it still worth considering in 2023? Looking to cover about 5000 sq ft for an optical fibre connection where the ISP-provided router+modem will be used only to convert optical to RJ45 and use this as my base router! The maximum speed supported by my ISP is only 200 Mbps. Looking mainly for 4k streaming with no buffer issues, video calls and a bunch of security cams.

[@LamarMK]

Great Video! Best Mesh System I’ve tested yet. The range is incredible. 💯👍

[@kmw497]

For wired backhaul between both mesh devices shall we use crossed-over cable? How about connection between main mesh AP and the main ISP router: shall we use crossed-over or straight-through cable?

[@Just_Listen785]

So, what does this do? Would it help with buffering when streaming movies and such?

[@garbea71g]

Installed mine today and no more dead zones!!!

[@davehumphrey6431]

Just returned mine. Set them up and could get no more than 2 bars on my phone, when standing next to the Deco unit that was connected via Ethernet cable to the new modem.

[@faisalali9290]

TP-Link Deco X20 is very good by speed and coverage.

[@pastor_uriel]

Tengo los Deco w3600 están actualizados pero no logro que sea visible la red para los dispositivos 2.4ghz algún consejo

[@bernardsanjaya815]

Compare to deco m5 which one is better.?

[@wally6629]

How does one set up a "Secure NetWork" using the DECO X20?? I can't read the Instruction that came with the X20, because I don't have a Microscope !

[@to5msheppard]

Have you heard or tried to hook up the X 20 with the new Verizon home Internet box. I had the X 20 hooked up to my suddenlink and it worked good, but I have the new Verizon Internet box which is way cheaper and I couldn’t figure out how to set up the X 20 with the Verizon box?

[@avituriski]

can i add a 4th unit ?

[@tanlianteng9930]

does deco m5 support wifi 6?

[@sigmiami]

what about control of the channels- there was no mention

[@ValkenDnB]

Super cool, planning on running a business with a printer and computer from my detached garage so this is huge.

[@whataboutki]

Do one of the units need to be connected to the router via ethernet? Or is that just during set up?

[@kensebben1]

This is what it seems like. Or at least for initial set up.

[@MinorityPatriot]

Can you add a 4th unit to expand coverage area?

[@moniquem783]

Yes, you can add as many as you need.

[@jaij8478]

Just a couple questions: can these be setup as a wired system or a mixture of wired an wireless. Say 2 are wired into an isp provided modem (or daisychained) with one being the master node for the mesh network and a third acting as a wireless one that could be moved around when needed, with all three running on the same network. Is this possible? And if so does the original isp provided modem still transmit a wireless signal whilst passing through data to the master node to run the mesh network. Also since the isp modem doesn't support wifi 6 itself if it is being used as a pass through in this scenario to a master node, would the mesh network still be wifi 6 capable. The reason i ask is seeing as I want it to be wired, I don't necessarily have to have the master node directly next to the modem and each node could act as a wireless access point on the same network wired into the modem (apart from the isp modem which would hopefully still run its own network as usual if possible) and this saves a node meaning I don't have to spend extra on an extra node.

[@xander-mk4ck]

Yes

[@xShady313x]

Would this work for an apartment complex that uses the same internet?

[@SilichipX]

I bought TP-Link Deco X20 additional unit for £85 on sale at the broadband buyer.

[@Nztol42]

Does it have MAC filtering?

[@BWWGL9]

Well just how FAR is that detached garage? 10, 75 or 100 feet away? Let us know... THANKS

[@williamsmith3331]

Ok. I have FIOS and the router has a coaxial for TV and CAT 5 for internet. Do I leave the router plugged in via COAXIAL and plug the CAT 5 into the mesh system? Or do I need to plug the mesh system into the modem in the garage with a separate CAT 5?

[@CalProd]

Is this a modem/router or just a router?

[@elfinerisa]

can i ask a silly but very important quick question here: does it have any requirement on the computer's os? i've got windows 10, windows 8 and windows 7 and even a computer on Windows XP. if I follow the instructions it seems like the wifi set up would be changed and would this mean the computer running on XP wouldn't be able to use wifi at home anymore? and what i'm worried the most about is, are we able to downgrade it back to the old wifi if it turns out to be worse than the old wifi?

[@Ciangi87]

Do you recommend this or the eero 6?

[@jamescullins2709]

Question: I have a Tp-Link AC1750 that I want to replace with a Tp-Link Deco x20, can I remove the AC1750 install the Deco x20 and just use the old net name and password so I don't have to change name and password on each device. Will this work?

[@4041020nate]

can you use these with any internet provider? I have spectrum.

[@Daaaaaaavid]

Routers usually bring 4 or more ports, why do mesh systems only bring 2?

[@Welshmanshots]

Most people use wireless and don't have a computer, even people I know who have a gaming PC use wireless.

[@lukasgomolsky1570]

I have that but the only problem is that i have no where to put it

[@samdeur]

Hi.. am i understanding you correctly one can turn out mesh roaming for certain devices ? and leave it on for others ? is that one improvement above the older "TP-Link Deco M4 " set ??

[@Dieseltownify]

I have this same question. Would love to prevent my HomePods from switching.

[@yourpcmd]

No, you cannot. It's either on or off.

[@anthonyrindlisbach550]

I love my tp link mesh system. Good to know they have WiFi 6 systems now

[@rasberry4739]

Can you hardwire each zone?

[@yourpcmd]

If you mean each "pod", yes you can by using the backhaul feature. But honestly, if you're hardwiring them, using this mesh system is a waste of your money and you'll be better suited and pay less for a wired WiFi extender.

[@axetroll]

@@yourpcmd Actually there is advantage with this unit since it's wifi 6 with multi-user and if it's double band and you're able to connect by wire, then go for it! Triple band will use 6ghz to communicate between the nodes. the extender may be a not so smart to have fast roaming.

[@BoB-uy5ro]

Great video! can I ask what camera lens you're using here? thx

[@AnsemUchiha]

Do I need to have a modem/router to use this or can I use It by itself because I'm moving soon and the old one I have is crappy

[@9to5toys]

You will need a modem as well

[@nirhaber6149]

@@9to5toys what would you say is a good, 200 usd or less modem with 5 ports ish? I have gig speeds and I want to buy a good modem with this exact same mesh system

[@Peetie_Wheatstraw]

Does TP in TP-Link stand for toilet paper?; that's what these look like.

[@theaveragejoebody]

It totally looks like it!

[@tonylochner4730]

Hi, I'm interested in these. I plan to use them at my TVs, Oppo Blurays, and Roku sticks, wiring the external LAN ports to the devices there. The router base would be at one end of the house and the next about 45 feet away and again 45 feet away. Some of these devices only handle 2.4g wirelessly so hardwiring with switches at these these locations should bypass that. Then all I need is some 2.4g for printers low speed. And as high speed as possible, 5g for all portable devices. At the source, I've wired all my computers through switches. I have a 400Mhz ISP. I plan and need to specify MAC device QoS to guarantee Ultra 4K Video is not at all an issue. Will this system work well, step by step across the house between units, and yet still work well simultaneously with older wifi devices like iphones and laptops???? Tony What do you think of my idea?

[@jasons5704]

I have this system in a two story townhouse. It’s not great unless you use a wired backhaul. I haven’t run any wires upstairs yet and I lose about 50% on the secondary unit

[@otisdecort147]

A good alternative are the P9's which have powerline capability, but only if your electricity cabling is fairly recent.

[@jasons5704]

@@otisdecort147 that’s a good point but I’d like to have a WiFi 6 system. I wish tp-link would have added power line backhaul to the x20 and x60

[@otisdecort147]

@@jasons5704 That would be a great idea!

[@hixydixy123]

Better than the Deco M5?

[@audioqueries7226]

Much...

[@axetroll]

m5 = wifi 5 (ac) dx20 = wifi 6

[@loaf_iii9558]

What mic is that??

[@vgaite2702]

Hello Drubes! I am wondering if this mesh router have 2.4 channel available? I have wyze devices in my home and they’re only compatible with 2.4ghz channel. I see your wifi network on your phone only shows “Drubes” im assuming that’s wifi 6 or 5ghz. What if i want to connect to 2.4ghz only, is that possible with this router? Ty

[@noahvandergoes6170]

yes it is it has 2.4 ghz as well! it switches automatically

[@Tizzledk]

Do each of the units have ethernet?

[@Ultimate-Technology-Solutions]

Yes.

[@dickiegoodtimes]

Nice video with lots of info. Can I throttle down one of the units or a guest network ? I have an Airbnb and would like to offer a set max internet speed. Thoughts?

[@jagtan13]

We have a set in our bnb as well you can set a curfew for individual devices if you'd like in the app. Each device is clearly labeled on the network. As for throttling you can set priority devices, but otherwise I have not throttled devices down.

[@pr3sari00]

Purchased on Amazon cuz the "DEAL" seems nice for anything WIFI 6 $299. DID NOT Work out for me at all. End up returned it.. Im gonna pay preimums for higher end Wifi since its VERY important for me as its part of work. Not going Cheap anymore, was deciding between Asus X8T 950 or Orbi $1200 both with 3 units. end up with Asus and its WAY BETTER cuz of the 3 band.. Worth the price for me. Hope my opinions help

[@brucebanksshow]

The lack of a dislike counter is blowing me.

[@brucebanksshow]

It's a good product!

[@qatestbrian1]

Is there a main device? The walk-around was too long.

[@9to5toys]

You connect one of the units to your modem. That unit then acts as the main device.

[@MarkPanado]

What mic are you using?

[@yordanialvarez6980]

Which modem brand and model can be used with this mesh system for better performance?

[@AA-nj2ni]

If i have 3 deco x60s and buy a wifi printer and connect it to one of the deco x60s. Will i be able to print something while being on the other deco x60 in a different room?

[@9to5toys]

Yup, they'll all be on the same network

[@MrSheffcity]

Will these work with the virgin hub-5?

[@katellis70]

hi does it have a cost per month

[@christophermhernandez1532]

Is your garage heated? What's the minimum operating temperature for this thing? I want it for same reason, but live in northern climate, cold winters.

[@CANAS1AN]

I saw conflicting answers on the amazon page. If the house is wired for Fiber (live ethernet ports everywhere, no modem needed), do you still need a router with this mesh system?

[@axetroll]

live ethernet port = wired connection mesh = wifi connection by access point

[@automoglow]

I just purchased this item and I’m new to mesh systems. Thanks for the video. I have 2 direct Ethernet ports does it make sense to plug 2 of the 3 decos direct?

[@otisdecort147]

Your first deco is always plugged in directly into your modem. If you have RJ45 connections running through your house, you will benefit of an even more stable network by using the built in backhaul feature. So it would make sense yes. I do this with my deco P9's which also have powerline capability. So one port is used to connect to the other deco and the other port have a switch plugged in to add multiple wired devices to one deco. Hope this helps

[@automoglow]

@@otisdecort147 ok so it really only matters if I need to plug anything direct? Connecting it to my other RJ45 wouldn’t make the wifi stronger or better connection? Sorry I’m new to mesh and want to maximize it. Right now I have 2 RJ45 ports coming out my wall 1 upstairs and 1 down.

[@otisdecort147]

@@automoglow It will definitely improve the quality of your wifi network if you connect your decos via the backhaul feature. So if you can connect them with each other through your RJ45 ports in your wall, then definitely do it. Via the backhaul feature they can provide a much more stable network.

[@hubert3637]

no backhull channel makes it a slow mesh system. Asus Ax8 is better, - it is way fast, especially if you have 600Mb/s and above internet. I was wandering about this think but this is just to slow. It is a shame that you didn't make even a speed test benchmark. WHY?

[@kekidit]

AX8 = 500 € for TWO modules !

[@lisap1776]

...won't stick out like other routers, lol!

[@mtjoy747]

I cannot use the X20 because my cell phone is NOT Apple or Android LOL - Windows 10 Nokia Lumnia 635!

[@lukesinclair6764]

these are NOT seamless or easy to install - theres a lot to know so i hate when sellers say this.

[@TravisColinColeman]

Wow. This video has you waking around with late model iPhone giggling with burry background. Not help full.

[@ImKurono]

The still looks like rolls of toliet paper.

[@aarontherobberbaron]

Are we reviewing toilet paper now?

[@uiscepreston]

It's not really a review if you include a link to the amazon purchase page.

[@ghostrecon7805]

جميل 🌷💘

[@UncleFjester]

*Annoying AF background music, not needed while you talk, you can delete it in post editing.*

[@laszlobodis9738]

Fix that phone... and please learn networking before uploading videos like this.