9v Nerf Stryfe Mod

[@Flygonial]

9V mods have been obsolete for a long, long time, my friend. In fact, they never were particularly good considering how pathetic their capacity (and therefore battery life) is.

[@kdoggarvey5835]

How to I recharge the battery?

[@mrcrbgaming2412]

i had some poundland batteries batteries and the literaly only lasted for 5 mins lol.

[@CrimsonHoodnerfer]

Just a little tip you need to take of the little screen in front of the flywheel cage to increase range. And if you re grease the trigger it will work more smoothly.

[@SlickTwigDotWAVfile]

Crimson Hood nerfer that is what I’ve done to my stryfe so far, also I removed most of the locks, and I might put a LiPo or something in.

[@BrokeNerfing]

Yup, I put white lithium grease on my trigger spring and it sounds/feels much better!

[@xxsammo781xx9]

Why are you doing it with 9v why not 4500 IMR they work so much better and there easer to install

[@jackargie1092]

The project was 9 volt not imr dude

[@matthewandextremenerfguns9507]

But you still have to rewire with 4500imr 😒

[@benabad4186]

An easier way to do it is to just bypass the thermistor. It will give you the ability to give you trustfires and imrs. Eventually, the wires will burn out, so you will have to do some re soldering.

[@SD18-videos]

Ben Abad Thanks for the tips, but I think next time I will just go with a lipo instead

[@jackphillips6655]

Please never use 9v batteries, use a lipo or lithium ions

[@SD18-videos]

Jack Phillips I agree after doing this project

[@Fatez]

True

[@lymie9155]

@@SD18-videos At the LEAST use TrustFires. Would recommend IMRs though.

[@Cringemoment4045]

@@lymie9155 those batteries are dangerous. If you don't want a lipo use a nihm pack or eneloops batteries

[@jackargie1092]

MNemJef,mr_bruhman on reddit yeah bruv they gonna burn stuff

[@magicmanz1601]

Woooooooooooooooooowww You completely changed the world of intros!!!!!!

[@magicmanz1601]

Can I recommend being less awkward?

[@SD18-videos]

Caleb McGowan can’t help it, it just comes too naturaly

[@spicasusl3]

@@magicmanz1601 dont be toxic mate

[@harrisontashjian752]

I say this is a god vid for your first mod, I did something similar on my stockade, but you can still use 14500 batteries I plan on getting imr batteries soon

[@SD18-videos]

RGBGamer thanks for understanding it was my first mod. A lot of people don’t get it. If you liked this one, I think you would love my next mod

[@BrokeNerfing]

Wow people still do 9V mods? I thought these went out awhile back.

[@bananus815]

?

[@aviation4lifedk]

I just modded My stryfe with 9 v

[@benty6024]

you don't have to rewire the whole thing, you just gotta remove the thermistor or bypass it and install 4 imr batteries

[@covidebolaids3578]

Bentypundure wtf it will literally explode you can run 2 imrs with nothing and for 3 imrs you need to Change wires and motors and you just can’t use 4 imrs.

[@benty6024]

@@covidebolaids3578 uhh no cuz i did it myself and it's quite powerful

[@covidebolaids3578]

It’s gonna break and your gonna regret it and be embarrassed that you were wrong so you won’t reply again.

[@benty6024]

@@covidebolaids3578 ha ha very funny. Do you know the term "better flywheels"? If no, keep quiet

[@covidebolaids3578]

What do you mean the motors and wire are taking the electricity and they will burn.

[@charlie-fk3cp]

If you do any battery modifications you need to rewire. It isn’t hard and the stock wires are ass. No need for bed flywheels or motors; stock ones are fine. Go check out FoamDataServices stryfe rewire guide for a good mod

[@nicolasreed21]

Do you know what the word "amps" means?

[@minecraft12426]

Nicolas Reed no he does not

[@lymie9155]

Amperes. They are used to measure current.

[@notskeppy638]

Can you please get a louder mic or speak up. With headphones I had to listen on full volume to hear you. Then the music is really loud all the sudden. Just some constructive criticism.

[@krystiandymurski1469]

Well ur definaltly not skeppy

[@UAF16]

@@krystiandymurski1469 YES

[@sreeyanshthogiti]

ya this was the problem for me too!

[@mistressmerry4]

Y 9v wen there's lipo's?

[@benty6024]

9v is an alternative to IMRs however lipos don't ive you as much power

[@lymie9155]

@@benty6024 LiPo's are the best batteries for Nerf modding. But they are costly, require maintenance and safety, otherwise they can explode. And 9v is no alternative to IMRs. 9V is an alternative to AAs, meaning they absolutely SUCK!

[@justanander]

9v are expensive, horrible and not good for moding. Use IMRs or lipos

[@SD18-videos]

Ender Dog yes, but I can't just leave a lipo in there and pick it up when ever I want to play

[@justanander]

SD18 dude worker makes twisting screwes for the tray and lipos can be disconnected easy with an xt60 connector

[@SD18-videos]

Ender Dog but if you want to make a lipo last you have to balance charge it when your done, so you can't just have it fully ready whenever without notice

[@justanander]

SD18 bruh that's the thing lipos are much better. 9v are worse than AAs. They last less and are too expensive. Even IMRs are better

[@SD18-videos]

Ender Dog it was my first electrical mod and the materials were cheep

[@apfeltee34]

20 gauge isnt good use 18 gauge or 16 gauge

[@lymie9155]

He's using a 9 volt battery, which is worst than a stock Stryfe's AAs. Doesn't need any rewiring. He didn't even need to rewire to 20 gauge. He could have left it stock.

[@lymie9155]

Bruh. It's not a rewire if you don't take out all the stock wiring. You left wire all over the motors.

[@maverick13_bro87]

Use imr not 9 volts

[@homebakedmemes394]

“I went ahead and already unbo-… oh no”

[@kevindurantsburneraccount1819]

dude can you do a imr in a stryfe

[@SD18-videos]

Nerfer 101 it's pretty much the same. All the same lock removals, but no/little battery tray changes, but I would totally do one if you want

[@kevindurantsburneraccount1819]

and can you subscribe me

[@SD18-videos]

Nerfer 101 I will look, and if I like it, sure

[@CrimsonHoodnerfer]

Nerfer 101 I subscribed.

[@ismailsheikh5397]

yeah the voltage and the amperage might be the same, but imrs are way more effecient, and you don't have to modify the battery tray, plus a 9v has more motor sag, and if you don't upgrade the wires their is no point anyways. Lipos and imrs even AA's are way more effecient than 9 volts

[@maihhel3721]

Mine is 15 volt on 10 aa batteries and it aint shootin even far

[@SD18-videos]

mikez There is a possibility that with that many volts you damaged the stock flywheels. Where did you even fit 10 AAs

[@maihhel3721]

@@SD18-videos i fit them to the side of the blaster in a lego battery box and used a wire from a broken motor and put it in the battery contacts and fixed the box on with More legos it was a hell of a system

[@solfuros7673]

11.1 v lipos in use 18 gauge is recommended Cilicon insulated wire not (20 gauge that’s to small)* 😂but 9v battery’s are terrible I can tell that you must be a little new and trigger happy because 9v battery’s have really bad voltage sag and that’s not necessarily good for nerf blasters plus 9v are prettying expensive in most places and you will have to replace them

[@SD18-videos]

Ethan Mena isn’t 20 gauge smaller

[@solfuros7673]

SD18 yes it is that was a mistake

[@solfuros7673]

SD18 plus barrels do not increase accuracy they acctrually decrease accuracy

[@lymie9155]

Yes I agree with everything you say. Always use silicon insulated and tinned copper. Copper is okay just not as conductive and has a shorter lifespan, and aluminum clad is simply terrible. PVC insulation is meh but it cannot handle extreme cold or hot and is not as flexible. In cold it can harden and break and in heat it can melt. And I would recommend 18 - 16 gauge on a 2s LiPo or 3s LiPo. You can go as high as 14 gauge if you are using a high current like a 414 A battery Bobololo used in the PWNSaw but usually MOSFETS are recommended also.

[@edit_8866]

I love this channel.!

[@a-aron3847]

AAs are better than 9v

[@lymie9155]

Yea lol a stock Stryfe is better than this

[@Impossible_Fishy]

Yessir

[@masonengel383]

9v mods kind of suck can you do a lipo

[@SD18-videos]

I agree the 9v was my first electric mod so I was just getting the hang of things. Plus it was cheap.

[@JasminNesbitLookbook]

I agree but the only problem is lipos are dangerous and can explode people have to use safety bags so they don't screw up and kill them self because its very hard to stop a lipo fire because they keep going and going and handling lipos as a kid is very risky in my situation use imrs, ultrafires , or trustfires they don't run out as much and its less soldering and you don't have to use thing like cutters.

[@Kaiwa3000]

Jasmin Nesbit you have to be shitting me. Lipos are as safe as any other battery as long as you know what you are doing.

[@JasminNesbitLookbook]

yeah as long as you not what you are doing. lipos are great but, can you tell me why they have to have safety bags so when charging or over heat. lipos can cause fires and its non stop. hey at the end its my opinion .

[@BrokeNerfing]

Jasmin Nesbit theres all kinds of crazy safety stuff for lipos but the people i know who been using them for years dont use the safety bags and they run just fine. Jusf dont be stupid with them and charge them in an extremely hot location or a wet location and dont puncture them. I store mine in a lock box that is lined and insulated because it was for storing medicine but I know people just toss them in drawers and are fine. I think its all just guides to get then to last longest but like I said, the guys I know never had issues in years.

[@joecrosstfxc9566]

Why the 9 volt battery? I'm guessing you are a beginner, because once you get skilled enough use lipos or atleast imrs.

[@Lulcam86]

JosephTheGoat do the right thing

[@spicasusl3]

those are expensive

[@brodieweiler3993]

That's a whole lot of work for not a whole lotta performance boost just take the locks out at that point

[@thenerfoperators5252]

Dude you’re so smart.

[@amarat.]

please never use a 9v battery in a stryte

[@notsbil.15l98]

Why

[@Shark_Theory]

Imr batterys take no effort 🔋. And there good

[@SD18-videos]

Jonathan Martinez I realize that now, but it wouldn’t have been as fun to just pop batteries in

[@lymie9155]

@@SD18-videos That's you run 2 batteries with 2 dummy batteries if you run 3 IMRs with 1 dummy you will need to rewire the whole blaster and probably change the rev switch to a low resistance high flow switch like the Omrons.

[@Cringemoment4045]

Imrs are dangerous. Use lipos instead

[@skyblazeice7880]

@@Cringemoment4045 no lifepo4 is safer but i prefer the btter lipo or li ion

[@ronniewilmott4706]

No do not, use IMR’s

[@BlazingTonk]

9v low lifespan. NO Lipo Battery. YES LITHIUM. OK Trus fires. WTF!

[@Fatez]

IMR?

[@lymie9155]

Please be more specific with the "LITHIUM". I'm pretty sure you are talking about IMRs but Trust Fires, LiPo's, and LiFe/LiFePO4 are also Lithium. Trust fires are Lithium Ion, IMRs are Lithium-ion Manganese, LiFe is Lithium Iron(yes iron, not ion, Fe is iron in the periodic table) phosphate, and LiPo is Lithium Polymer.

[@bharathimanju1308]

U have more hardworking ever✋👍👍👍

[@brodieweiler3993]

Not saying it's a bad mod or anything just saying I wouldn't do it

[@Lulcam86]

Yeah 9v suck do imr or lipps

[@fatpaul9592]

My stryfe runs 14.2v

[@SD18-videos]

Leo Cerins just wait till my next video, coming out soon

[@SlickTwigDotWAVfile]

That won’t survive long.

[@BrokeNerfing]

On what motors?!

[@lymie9155]

4 IMRs or 4s LiPo? Either way, you must be running 3s motors because those are the only ones that can handle that overvoltage.

[@lymie9155]

So deathly! Ahh I'm scared!

[@dwag8869]

Lolwut

[@Shark_Theory]

Nyaaa good mod but too much effort for something that doesn't shoot much further blaaamma 🔫

[@gleamingsquid2213]

0:02 whoops

[@Lulcam86]

Yeah 9v suck do imr or lipos

[@daddydewey1254]

9v peasants

[@zennytj]

9 volts are just awful

[@SD18-videos]

Operator Duck you are not the first nor the last to say that

[@masonengel383]

Yea I agree

[@joecrosstfxc9566]

You know you can reply to the person to not look like a complete idiot.

[@spicasusl3]

@@joecrosstfxc9566 bruh

[@lakestmusic]

Stryfe

[@spicasusl3]

correct

[@nathan.w9906]

Nine volts suck

[@juliabrucker7110]

9v scrubbbb