A $2500 Custom Rock Bouncer You CAN'T Build!

[@withcookie5583]

Where's your driver? 😆

[@TomleyRC]

I was waiting for this comment 🤣

[@brianellison3525]

But, I mean, where is your driver?

[@withcookie5583]

@@TomleyRC I had a feeling you'd be expecting it. Great video though. Cheers

[@lashwa086]

@@TomleyRC why don’t u get the xmaxx it’s not bad

[@chadedwards5908]

Am I the only one that seen the drive shaft fall out at the end pointing 6:00 lol great video awesome bouncer thanks Tomley! 😀

[@TurboJayMedia]

Haha was gonna say I know someone else had to have seen that 🤣

[@bryandouglas739]

I noticed it, I kept going back to make sure I was not imagining it

[@brianellison3525]

I like that you color coded the front and back. Makes it easier to tell what way you're supposed to be going. Hah. Impressive rig. Thanks for the enthusiasm. Waiting for you to get one of the new Losi JRX2 mini's. You're the perfect one to test run that one. Be well and have fun. 😀 👍

[@TomleyRC]

I’ve seen them JRX2’s and don’t thing they are worth the money really. Not sure I’ll get one

[@derricksazrc3411]

That backdrop is perfect with the browns of the hills and dirt and the greens of the shrubbery to go along with the Bouncer.

[@TomleyRC]

Yes, it’s such a cool place

[@aljensen7779]

The Ryft, by design, is a go-anywhere vehicle and if I can't decide which rig to bring along, I always choose the Ryft, since it's likely to handle any terrain I put in front of it. I beefed mine up too, with GPM hardware and the rear torsion bar was the best investment. As soon as it was installed, all the torque twist disappeared. Great, fun little machine on 4s. As a crawler though, it needs a better power system in it. It's a great platform for selling Firma stuff, but you need a sensored system in it to go slowly enough for controlled climbing.

[@TomleyRC]

Yes, a sensored set up for crawling is a must. I’d not looked at Ryft prior to doing this video, and it’s certainly a decent rig!

[@frankensteinsgarage9632]

AI Jensen i found when I fitted the factory rear sway bar I started chewing diff centres out on 4s. Since then I have upgraded to Treal centres. But I have thought about going to a sensored motor. Going back to 3s, removing the rear sway bar and keeping it more as a crawler.

[@aljensen7779]

@@frankensteinsgarage9632 Idk if it makes any difference, but you said you used the factory sway bar? And the one I put in mine is a GPM. Maybe that has something to do with it? Who knows but my diffs have been alright with no noises. Also used GPM driveshafts but MAN, it's expensive ordering from them.

[@frankensteinsgarage9632]

@@aljensen7779 yeah ok. I'm still running standard drive shafts. I have once sheered a centre spline shaft for the rear drive shaft. My diffs never get noisy. One minute they are fine next minute they just strip like butter. On 3s I never have a problem. In saying that I haven't had a problem on 4s since I fitted the Treal diff spools.

[@disciplinerc]

Right on dude, looks sharp. It's impossible to keep them looking beautiful as the first time out, the are born of fire and made to be beaten 🔥😎🤘

[@teamjono69]

Fancy meeting you here...

[@Mr.NiceGuy80]

Looks like something was hanging out of the bottom there at the end. Driveshaft, perhaps?

[@RCRoads]

Wow! Crazy awesome Rock Bouncer. It seems to take all terrain quite well and the high gear speed is impressive and its ability to take on the rocks. It seems to have plenty of go on 3s. 💫 Nice review and footage...

[@albertsolbo2297]

WAY out of my financial boundaries but WOW...I Love it....The colors are so cool on it and the performance looks awesome...Wish I could afford it cuz I'd have one lol.

[@TomleyRC]

Out of my financial boundaries as well! 😅

[@toddbertram6556]

There is a perfect testing ground about a 1/4 mile away my man. It is sitting beautifully in the background

[@timearlmountainsiderc6519]

That thing is gorgeous. Thanks for the show and tell.

[@roblowrie1969]

Wow!! That is a work of art!! I understand your fears or scratching it!! That's everything I can't get my Axial Yeti to be!! It's got loads of expensive bits on it, but can I get the steering to work!!! 🤷🏻‍♂️

[@dave1966red]

WOW .... now that is one Cool 😎 👌🏼 RC rig that has clearly been built with great skill, using top quality kit and to such a unique colourway. Fully understand your nervousness at not wanting to trash it but hey the way to show its true and full potential is at controlled speed on the kind of rocky terrain you took it to. For me the way it flips, jumps and soaks up some pretty serious lumps and bumps relative to its size and scale is its greatest attraction. Well done to GCRC for creating a truly unique and beautiful RC truck. Also well done to you Phil for providing the very best showcase for it. The bench videos were awesome and showed off the quality of both the Treal componentry and GCRC's build. All in all a brilliant showcase so we could all share in this incredible RC rock bouncer in all its glory.

[@TomleyRC]

Yes, it has the very best bits and looks amazing. Just a few war scars now 😅

[@RACEABLE]

even if i dont find any purpose for the rock bouncers in general , i hve to admit that this thing is a masterpiece..

[@allenfertgus354]

Loved that last flip, but rear driveshaft left the chat lol. Looks like a great build. Absolutely love it

[@cordite7207]

Ive wanted one since they released but I just cant justify it. Personally, with the way I'd run it I would need the axle housings and it just adds up really fast. Really cool to see one with all the bells and whistles

[@TomleyRC]

Yes, it can soon add up!

[@benmochrie6520]

Fair enough. That’s a wicked video. 👊 Respect.

[@jz64]

That thing is bad to the bone one of the coolest Rc cars I have ever seen.. Awesome video

[@Art-zs6sl]

Looks awesome. They Ryft is insanely fun. I really like how you dyed the cage, wish mine came out that great!

[@TomleyRC]

He did a good job of building it for sure 👌

[@islandrc-duke1972]

Wow, awesome looking RC and great run

[@GARYU-S44]

Thank you for your nice comment, my friend😆🎶👍

[@marcusrcs1885]

That's the best looking rc so far this year

[@TomleyRC]

Agree 👌

[@chriswhite2714]

Wow that is awesome, scratches and scuffs always make it look better cool video Phil 👍

[@MrRobertshaw100]

Thing of loveliness to look at and it went well to boot but blimey I was cringing badly every time it rolled over. 😱😱🤣 You're an animal Phil! 🤣

[@Livlifetaistdeth]

Throw a sensored Castle system in there and Bob's your uncle. What a beaut!

[@TomleyRC]

Yes 👌

[@MRMechanicRC]

Dude that’s one insane build! All that aluminum is just crazy!

[@jimhuff1534]

That’s how this machine should run.!! Tim Cameron would be proud!!!!😋🤘

[@TomleyRC]

Yes 🤟

[@cannibal666]

I've seen a few hooked up ryfts in the past year but this is freaking awesome love the two tone scheme 💥👍

[@jameswisecarver]

A day late and a dollar short....morning Tomley its 10:23am in Arkansas, USA!! Thanks for the vid that thing is CHOICE!!

[@radiovlogi]

Is it supposed to bounce like that or should the shock absorbers... absorb more? Or is it called a rock bouncer for a reason?

[@wheelsdownrc6348]

Yea good on you for even getting to drive it,that’s a lot of aluminum ✌️thumbs up driving 👍

[@TheflyingkiwiRC]

I wish they came strong like that out of the box. I've never understood how manufacturers can make something so good but so flawed and continue to sell them. Great for the aftermarket upgrade companies I guess. I know out of the box with all the aluminum parts would make it expensive but stock it just won't stand up to its name as a Rock Bouncer coz the axles housings will soon break. Bummer

[@frankensteinsgarage9632]

I've got a stock one. Well apart from centre and rear diff spools, plus a 25kg steering servo. And tbh the only part that brakes and keeps breaking is/was the spider gears in the rear diff when running 4s lipo. If I run 3s I don't have a drama. And now that of got Treal diff spools the car has been almoat indestructible. I've jumped and treated it like a basher. Never had a problem with the factory plastics. Only flaw I could say is it doesn't handle well for how fast it is. And yes if you try to crawl it the motor cogs a little. I will go to a sensored motor soon. As for the handling it does make for a rewarding drive if you can drive it at high speed and keep it up right.

[@MCsCreations]

Damn! What a beautiful thing, Tomley!!! 😃 Fantastic bashing there!!! Stay safe there with your family! 🖖😊

[@TomleyRC]

Cheers dude. You too

[@spudjames5038]

That is a very awsome bouncer. But them shock def needs some tuning

[@rcplaytime]

I've literally just built one of these,almost exactly 😁😁 lol😂😂 beautiful machine 😀👍👍👍😎😎

[@bryantgenson5339]

Yeah I started with a 6v to 12 v tool moter . It works for crawling . Not Shure if gearing and pinion will make much difference more like more rpm and more volt.

[@Lee.gRC27]

That does look awesome , great build GC

[@theminiatureconstructionco4556]

Beautifully engineered. Cost more than my last two real cars combined! 👍😅👍

[@TomleyRC]

Cost 5 times one of my cars 😅

[@theminiatureconstructionco4556]

@@TomleyRC does being given a free car count? 😄

[@smallsoundrc9678]

What a build Gareth did looks epic 💪🏼💪🏼 and great to see you having some fun with it 👍🏼

[@andrewborden1009]

Nice build! Might I highly suggest watching some Busted Knuckle rock bouncer videos and install an RC4wd 4:1 Gear Reduction Unit. It is geared wayyyyyy high thus pulling realism right out of the equation :/ And add limit straps. And a sound kit.

[@bacongl]

I would rather have an SCX6, Losi 5T or an Xmaxx for that kind of money. That being said, I am building a RYFT right now and this thing is a beast. Probably only actually need 10% of those hopups but it sure is a beautiful.

[@jasonbecker4997]

You could actually pick two of the three you listed plus batteries and be in about the same money. Kinda crazy to think about it that way.

[@Del350K4]

That was, a cracking backflup @ 6:39!

[@mikebird8290]

😪 THE TRUCK 😭😂🤣LOL. AMAZING LOOKING TRUCK GREAT COMPANY. THANKS FOR SHARING PHIL 🇬🇧✌🏼🤩👍🏼

[@TomleyRC]

Cheers Mike 😎🤟

[@justinjones5281]

Favourite platform for 8-10 year olds. They love to crash roll and bounce.

[@le_loui7643]

That is a beautiful RC car, damn wish I could have something as nice as that Lol, Love your video's and I hope you never give up, I don't know if you care or appreciate it but I pray for you to make it big on youtube someday.

[@TomleyRC]

Thanks dude… really appreciate the support. I have no plans to give up anytime soon 👌

[@meurigf]

You are big on KZbin! 100k here we come 😁

[@ksrnate]

It's only a one off because no one else is gonna spend 2 grand on a ryft 🤭 Anyway you broke his drive shaft at the end 😳🤣🤘🏻🤘🏻

[@mattgrandinetti8347]

I can build that in green. Treal will anodize almost any color if you ask. So green can be done with treal.

[@xod7861]

Wow this one beautiful rift .

[@jimhuff1534]

Dude that is a sick looking rig!!! Love the vids!🤘✌🏼

[@TomleyRC]

Cheers Jim

[@marcusrcs1885]

Wow that's is stunning at least it is being used if it was mine ide never take it out and keep it on my PC tower :D stunning !!!!!!!

[@TomleyRC]

Yes, I expect a lot of people would do that

[@michaeldorich4485]

A bouncing, bling, beast.

[@speckledjim_]

i use this guy for my Treal gear. im currently building a Treal LMT

[@TheReelRahim]

CRINGE! Especially thinking of the first scratch on that underbody on that big rock when u started crawling. No shelf queens for me, but dont mean i can get used to it😅. Beautiful build. Really looks perfect on the shelf, and runs like a devil on the trails. Thanks for the great content as always mate 🤟🏽

[@TheRCBuildersPost]

I may be the only one here, but I think that thing looks absolutely ugly lol. I prefer a clean look. I appreciate all the aluminum work done to this thing but nothing beats just a raw/polished aluminum and clean paint job to me. But, that's the joy of this hobby. Make it your own!! Nice video as always, Tomley! Cheers from Kentucky!

[@emkaykim5192]

woooo! hello Phil!

[@TomleyRC]

Helllloooo 🤟

[@NoLimitRC87]

Fairplay to Gareth ive seen pics of it as he was building it but seeing it running is even better, only think I'd say is to but a sensored motor and esc in there. I must say though amazing looking and performing rig, not sure I'd trust you with it with your driving habits Phil m8 haha. You done a great video of it dude Fairplay 👏

[@garethcurtis9665]

The motor and ESC was out of a standard Ryft off a mates fully murdered out now with black Treal and metallic dark green panels. He dropped in a mamba X and a castle sensored motor (forget what kv) and he crawls his with ease but also flies it 6 foot in the air off rocks. Sensored is the way to go for sure.

[@S40TBS]

😳 it's to nice to use

[@patricklavoie8719]

What a beauty! 😍

[@julienvoeffray1997]

Rear shaft broken at the end... Not for bashing, not for crawling, just a tuning CNC rc car, it looks nice but worth it for the price? Nice video as always!

[@exgtt2061]

I don't get it but I'm glad it exists 👍

[@mrmagoo.3678]

Not usually my kind of car tbh...but that looks tasty!..I wants one...NOW!!😈

[@CAPRAQUEENRC]

That's a beautiful build

[@dexterbeattie7884]

I Love the color combo!

[@TomleyRC]

Yes. Looks good!

[@ctay1071]

Need to take it too some hills where it belongs👌🤘

[@TomleyRC]

Yes, would love to find some big steep climbs for it.

[@garethcurtis9665]

Round 2 at EAST event.

[@GazooRC]

That’s absolutely beautiful! Great work. Love all the treal! New sub!

[@TomleyRC]

Cheers mate. Appreciate it 👌

[@GazooRC]

@@TomleyRC glad to support the channel. Love your vids. 💪🏼

[@Triggered-RC]

Watching that, I'm thinking the Ryft might be a good place to start in building a custom monster truck or mega truck... Hmmmm. Might have to get one and find out.

[@GSG-lc5zm]

Aww.. ya broke it ... I saw that lol 😂

[@createsomefun]

You can 3d print that chassis, I bet the whole chassis might cost under 100 in carbon reinforced nylon.

[@zacksaylor8203]

Man that's sweet

[@markmerrin1606]

That video only your new name will be T CUT TOMLEY...👍🇬🇧😎

[@KathysFlog]

Nice with a capital NICE. Think I'd like one to look at rather than drive. Maybe for my birthday 😅

[@bitten4life78]

One sweet Ryft

[@Trophy_RC]

Cool car! Energy! ⚡️⚡️⚡️

[@Microdose_RC]

I love the clickbait title, literally anyone in the hobby that put their mind to it could build this. That's not saying it is not a nice truck, but custom anodizing is not like a magical process that only can be had by a few.

[@RCJunky]

Flip it baby!

[@masterone436]

absolutely B E A U Tyful

[@hubbabubba7244]

I saw somthing hanging down at the very end of the video. Did you break it?

[@johnalenwork53]

I have a red cat Everest 10 that will walk that climbing or crawling! That sure is pretty though

[@philtobin9510]

Axle extenders and thinner oil in the shock and that would be a as stable as you like.

[@verigone2677]

Shredded the rear drive shaft on that last one...or at least bounced right out of it.

[@carlbModels]

Front ARB as well as rear? I know it is has a lot of ground clearance to control, but a front ARB is going to limit low speed twist and most likely over stiffen the spring rate on single sided hits. So less flex, and worse bump absorbtion? Interesting truck though 👍🍺🇬🇧

[@CentralOhioCowboys]

Sold my Ryft best day ever lol not a fan the way they flop around like fish out of water unless you get aftermarket case the 2 speed eat shift servos or bounce the drive shafts out unless have limit straps

[@yfzguru]

Would rather all steel parts to simulate actual scale power to weight, steel chassis,links,axels, I built a Timberwolf chassis added some steel plate, steel axels,links, beefed up roll cage with some steel rods and the thing was a beast with 2.2 super swampers, I set the suspension to handle the weight and it worked and reacted just like a real scale trail truck, it didn't shake and bounce like everything I see, this is cool but still not scale enough for me

[@gscott841]

What kind of tires are those and are those 2.2 size treal rims

[@johnsalt19]

phil was that something hanging down at the rear had tp pause it to look looks like rear prop shaft

[@TomleyRC]

Yeah, lost the driveshaft grub screw and the driveshaft fell off

[@johnsalt19]

@@TomleyRC thought thats wat i saw lol

[@stevemoon2136]

I'm sure he was extremely happy for the scratches.

[@TomleyRC]

Yes, adds character 😅

[@garethcurtis9665]

Now I won't cry when I do it. Rigs like this are for having fun with. He went gentle!

[@chrisschell7894]

I never seen a RC guy flip a truck that many times in 5 mins

[@KevinHuff23]

Treal offers EVERY single piece on that Ryft, both the orange and green parts are ALL available at treal.

[@TomleyRC]

They don’t offer Green 😉👍

[@KevinHuff23]

@@TomleyRC I see, I misunderstood what you meant!

[@matthewdegroot4126]

U broke the drive shaft.😆

[@benchallice8036]

Love your videos nices cars by the way

[@TomleyRC]

Thanks Ben

[@robhotson1882]

Which bit is the Axial? Trigger's broom had it 20years had 3new heads and 4 new handles

[@garethcurtis9665]

I think it's gearing, shocks, tyres, shafts and some bearings. You could build another with the box of bits left.

[@arronjones6985]

Awesome looking thing but I just don't get it 🤷🏼‍♂️ I couldn't justify spending that much on a truck that spends as much time upside down as it does on its wheels. Plus did you tell Gareth about the broken rear prop shaft or did you fix it before you gave it back? Great video as always but I just don't get it 🤔

[@ValleyRC]

"A solution to a problem that doesn't exist" springs to mind. It's not a great crawler or a great basher, they have about 5x the speed of a real life rock bouncer lol. Awesome looking things, even stock, but I don't really get them either.

[@KathysFlog]

🤣 I bet Gareth can SEE on the video what happened DOH

[@timearlmountainsiderc6519]

To sweet

[@benfred8]

What would be a comparable product that you are more used to? In a lower $ range.

[@TomleyRC]

Probably the FTX Ravine or Mauler

[@hoovenfpv4302]

Love the video as always but it really hurt watching you rip that beauty.

[@TomleyRC]

It wasn’t easy… but I was given clear instructions 😅

[@bryantgenson5339]

First I'll upgrade esc to 12v and use 11. V the moter won't last long but I'll have a upgrade moter . And grub pins . In myn

[@BullgearRCvideos]

Did I see a driveshaft pop off in the final clip🤔🤣

[@TomleyRC]

Yes haha.. lost the grub screw and it fell off. Too many back flips 😅

[@masjuggalo]

IDK about in the UK but stateside he could write that off as a business expense

[@TomleyRC]

Most of my cars are ‘stock’ or assets

[@masjuggalo]

@@TomleyRC I was thinking advertising.

[@bryantgenson5339]

Custom built like I'm doing . Myn is different body it's injora brand seems good still ordering parts

[@Granite-City-RC]

Thats some nice upgraded parts ....... think he will be annoyed I'm GCRC as well? lol

[@TomleyRC]

I’m sure there’s room for more than one GCRC

[@garethcurtis9665]

Cool name 😉

[@Granite-City-RC]

LOL cheers