A complete guide to using cheap wiper motors for Z- and X-axis power feeds

[@PaulLemelin]

Thanks for this. I've been wanting to do this with my mill and your first video was great so I've been waiting to see if you were going to release this follow up

[@HangarQueen]

Thanks for the comment -- and I'm sorry that it took me SO LONG to get around to this follow-up.

[@stevetaylor2445]

Thanks dor this video Helpful for many reasons

[@VE7MX]

Any chance you might show how you fixed the pwm controller. I think it would be of help to others including myself. Thanks for the ideas on the milling machine feeds.

[@HangarQueen]

Sorry that I just noticed this comment/question now (as I was responding to another). It was so long ago that I kinda forget, but it involved replacing one of the power transistors IIRC. I happened to have one in my parts kit so it was an easy "try this and see" fix that worked. Such a fix is likely not at all practical for most people, as the entire assembly is only about $12 from eBay. I'd already purchased its replacement before fixing the original, so now I have a spare.

[@frankglass]

do you have a parts list somewhere that i missed

[@HangarQueen]

Sure do! Hit the "more..." to expand the video comments above and you should see the parts list and links.

[@juanfieldhouse3749]

😄 promo sm

[@mattholden5]

First and foremost, thanks for sharing. Now I'm going to offer a bit of tough love. You sound like you're trying to finish explaining before you succumb to pulmonary embolism and you've included a lot of irrelevant fluff (video that isn't required to explain your dilemma or solution). The world market for attention will not forgive you for either of these.