A Detailer’s Secrets on Rotary Polishing. learning how to polish paint.

So you want to learn the rotary? This video is where that's going to happen. I'll teach you to cut out defects and polish to a mirror shine. With one tool.
Let me know your questions, comment below!
#rotarypolisher #detailing #detailer #saltlakecity

[@0-60STYLE]

Love these videos so much, a view inside a pro shop. Best channel on KZbin.

[@tylerj3088]

Great video, one thing I would say is dont use an air compressor to blow out the pad. It wears down the foam. Just use a pad washer and you add the moisture at the same time…

[@DetailingMadeSimple]

Awesome video bro! Very informative 💪 Your phone was living on the edge literally for the first 3 min of the video lmao. You’re right with a rotary is a multi step correction like 3 steps for sure sometimes 4 because of getting on the initial cutting stage. The finish came out flawless. What’s your opinion on cutting with a DA then finishing with a rotary? As we aren’t chasing the initial heavy defects left behind from the cutting stage?

[@ionelbanu4451]

Free lesson right here. Thank you Jamie 👍

[@BorndetailersTv]

For real I got you for sure

[@amounifnd]

This has become a great channel. Keep it up 💪. Thanks for sharing these tips.

[@BorndetailersTv]

Thank you so much means a lot 💥💥 I’ll keep them coming

[@mac102984]

I love the content. Just getting into rotary and this is helping my understanding big time

[@BorndetailersTv]

Thank you brother much appreciated?

[@DiamondDetailingBuzz]

I would love to hear what you think of what the DIY Gang said about the DA cuts more than a rotary?

[@0-60STYLE]

So thats a 7 inch pad on a 6" plate? What brand is it, looks like a 3M pad?

[@BorndetailersTv]

I could never get the finish perfect without out using the da. I think cutting first is go with the rotary. Finishing with a rotary takes to much time for a little better finish.

[@latestorder]

I think your hand movement is way too slow when you're finishing. Slow machine speed, negative pressure and faster movement is key. It should not take two steps to remove buffer trails.

[@BorndetailersTv]

Most of the time when I’m finishing with rotary it’s been 20 years since I was using this technique it would take me more the 2 steps that’s dope that you can do it in 2 👌🏽👌🏽

[@MarkQuintana801]

@@BorndetailersTv I agree with you been doing same technique for 38 yrs keep doing what your doing

[@amounifnd]

The specific wool and mf for DA with new compounds makes cutting with a DA really quick. But finishing with a rotary always makes sense as you can cover just so much area. If you use too much product, the softer pad can't break it down...so less is better. The amount your using may only be broken down on third pass. Excellent channel all round

[@DiamondDetailingBuzz]

Finishing with a Rotary gives you the best gloss and clarity far more than a DA, you just have to actually learn and know what you’re doing. I believe that’s why there are so many “detailers” these days because any ding dong can pick up a DA and claim to be detailer.

[@MarkQuintana801]

Good job homie keep up the good work always best to keep it moist

[@BorndetailersTv]

I will thanks OG you already know

[@LarryWebb-gv8dz]

Is ultra fine compound considered buffing?

[@Ecdetails]

Awesome video bro

[@BorndetailersTv]

Thank you bother very much appreciated

[@Steve0885]

I can't keep a rotory flat without it struggling to move around

[@Rabbit.760]

Hmm... 3M fine polish gums up real quick so i just use a tiny bit and clean the pad alot

[@BorndetailersTv]

For sure I add some water in it helps with dusting to.

[@Rabbit.760]

@@BorndetailersTv yep I like that trick too!

[@RHINOSOR97]

Good video man, but for the love of god please show the progress with a proper light not with the phone light..

[@BorndetailersTv]

Thanks brother will do thanks

[@1FilthyHabit]

Mayonnaise & peanut butter 🤢 😂 na for real tho. Great channel nice to see some proper grafters who actually work instead of being a KZbin personality

[@BorndetailersTv]

Thank you brother much appreciated

[@BorndetailersTv]

Thanks for watching

[@DiamondDetailingBuzz]

Finishing with a Rotary gives you the best gloss and clarity far more than a DA, you just have to actually learn and know what you’re doing. I believe that’s why there are so many “detailers” these days because any ding dong can pick up a DA and claim to be detailer!

[@Mike-xw4gm]

Bro let me edit ur vids give me raw video ill blow ur mind first one free🤘

[@BorndetailersTv]

Where u out of

[@rimantas1975]

thank you Rotary wins again after minimum 50 vids of watching , DA same as EV cars .

[@omarstephenson8967]

You used the wrong side of the clay towel.

[@BorndetailersTv]

😂😂😂🤡

[@johngaytes-ex7nt]

Ahahahahaha wear your glasses 🕶️ my man

[@omarstephenson8967]

He was using the towel side not the clay side..​@@johngaytes-ex7nt

[@BorndetailersTv]

@@johngaytes-ex7nt not sure what you mean

[@johngaytes-ex7nt]

@@BorndetailersTv Not you... the guy that said you used the wrong side of the clay towel