A JOB FINISHED FROM A PLUMBERS POV

DAY IN THE LIFE OF A PLUMBER
In this video I finish of the toilet refurbishment job. You see things from a plumbers point of view.
As always, thanks for all the support, it is greatly appreciated
#plumber #plumbing #apprentice #dayinthelife

[@dvdallison]

Another great vid. Wow those toilets look good, looks a great product

[@PlumbLikeTom]

Thanks for watching mate, I was pleased with the result on this one

[@Plumbingbob]

Looks a top job Tom. I’d be happy with that finish.

[@PlumbLikeTom]

Thanks for the support as always mate, I think it turned out really nice 👍

[@keithbrueton]

Fantastic work as alwaysTom thanks for the upload

[@PlumbLikeTom]

Thanks for the support as always Keith

[@hughwilson4911]

"I'll turn it off tonight, just in case! " Brilliant, doesn't matter how long we do this, we never quite trust these things enough. Good man Tom, thanks for another entertaining video.

[@PlumbLikeTom]

I just can't trust myself enough to leave it, I always have visions of walking back in and seeing carpets floating, thanks for watching as always mate

[@PlumberMeach]

Good work Tom, I think it would be great to see a time laps maybe set the camera up somewhere and then you can just crack on Non the less Great videos mate 💪👍

[@PlumbLikeTom]

Fair point mate, I did try a timelapse once when doing underfloor heating but I wasn't happy with it, filming can be tough sometimes especially when working with other trades, thanks for watching mate

[@glynstorer3269]

Good job Tom

[@PlumbLikeTom]

Thanks for the support as always Glyn, have a great weekend

[@Dave_MacG]

Cracking job as always mate👌🏻 Would be good to show a before and after for the final reveal.

[@PlumbLikeTom]

Thanks for watching Dave, I should have done that, I will know for next time

[@mickobyobrien2650]

Those panels are so heavy,I've come across then with a small cupboard built in to them which make them even heavier to lift off,gotta use a suction pads to get them off.😮

[@PlumbLikeTom]

They can be really heavy especially the double ones, good shout with the suction pads, I still prefer these to the chipboard panels though, these are fairly indestructible, thanks for watching as always

[@tonymurff5234]

Nice work Tom, The finish on the toilets look very well 👍👍🤜

[@PlumbLikeTom]

Thanks for the support as always Tony, I was pleased with how they looked

[@chrisholt2474]

Hi Tom, thank you for another great film, the job looks great at the end when it’s all fitted and finished off. As always it’s great to see that copper pipe and soldering, another fantastic job and always good to follow your progress. Take care Tom and I look forward to the next film. 🍻👍👍

[@PlumbLikeTom]

Thanks for the support as always Chris, this one tuned out nice, it was a bit hectic at the end with every trade in but the job itself went well

[@Heatking]

Great video Tom, looked really smart in the end!

[@PlumbLikeTom]

Thanks for the support as always Dan

[@johnwaby4321]

A very smart looking finish on those toilets Tom 👍👍👍👍👍

[@PlumbLikeTom]

Thanks for the support as always John 👍

[@Simonsimon-fy3hq]

My Grandad would have told you to insert the copper pipes before fixing the studding. He was odd like that...

[@PlumbLikeTom]

To be honest I've seen it done on some jobs, it would have made it hard for the joiner though and I always think if you make someone's life hard they are likely to do the same to you, thanks for watching

[@alimack5489]

Looks smart at the end that 👌 was that a sparky talking to you at the beginning on the blag for tools sounds about right 😂

[@PlumbLikeTom]

Thanks for the support as always mate, it was my uncle doing the electrics on this one, I don't mind sharing tools with family

[@pb9926]

Finished result looked fantastic Tom, great job mate 👍😎

[@PlumbLikeTom]

Thanks for the support as always PB, it is greatly appreciated

[@tirvplumbing]

Really nice looking toilets 👌 Lovely work as always.

[@PlumbLikeTom]

They turned out nice, thanks for watching as always mate

[@garywilliams2226]

Great vlog Tom, brilliant content of real world plumbing, thanks for sharing.

[@PlumbLikeTom]

Thanks for watching Gary

[@peterdawson5115]

That job looked excellent Tom, pity the hard work is never seen, it’s always satisfying to see a job finished. Hope alls well. 🚽👍

[@PlumbLikeTom]

Thanks for the support as always Peter, I know what you mean about work being covered up, at least we know it was done right though

[@jameswilson2899]

Top work as always Tom.great video.

[@PlumbLikeTom]

Thanks for the support as always mate

[@DavidCooper-x1j]

Very nice job Tom; the panels look great

[@PlumbLikeTom]

Thanks for watching mate, the panels do look nice

[@TheStevieb11]

Thanks for sharing Tom 👍

[@PlumbLikeTom]

Thanks for watching mate

[@andyfadian]

Really good transformation Tom, thanks for another great video. 👍👏👏

[@PlumbLikeTom]

Thanks for the support as always Andy

[@micka5617]

cracking job there mate. Well done. Love this content, just good, raw and honest.

[@PlumbLikeTom]

Thanks for watching Mick, glad you enjoyed the video

[@SuperWayneyb]

🤘😎🤘

[@PlumbLikeTom]

Thanks for the support as always Wayne

[@llamedosr7843]

Top tip with the hole cutter

[@PlumbLikeTom]

Thanks for watching mate, it is a handy tip that one, saves a bit of time

[@diddywright6165]

Nice content Tom, turned out nice👍🏻 I’ve fitted a few of those cisterns and quite like em. Turn the water off cos the leak gremlins come at night👍🏻😂

[@PlumbLikeTom]

Thanks for the support as always mate, I do get worried especially when buildings are empty, If I don't switch it off I don't think I could sleep

[@jacktandy7720]

Another great video mate (Just a suggestion) you should start wearing gloves or even fingerless gloves I know you obviously wash your hands, but getting constant dirty/chemicals on them in the long term won’t be good for your health

[@PlumbLikeTom]

Thanks for the support Jack, It really is a bad habit of mine not wearing gloves, I keep trying but it lasts one job and I'm back to how I was

[@bikerjon153]

As always fella

[@PlumbLikeTom]

Thanks for watching as always mate

[@MegaShan001]

Good content again Tom 👍🏻

[@PlumbLikeTom]

Thanks for the support as always Shaun, it is greatly appreciated

[@dennisphoenix1]

Looks a tidy job 😉

[@PlumbLikeTom]

Thanks for watching as always Dennis

[@colintownsend5024]

👍👍

[@PlumbLikeTom]

Thanks for watching as always Colin

[@Rich10000]

You smashed (in a good way lol) it on this one mate. Any reason in particular you piped it up in copper in the studs not plastic? Nice to see someone using a proper size spanner for once not an adjustable too.

[@PlumbLikeTom]

Thanks for the support as always mate, I prefer using copper if I can, I know it meant bending it a bit to get it in but I would still rather this than plastic

[@vicventurini3786]

5:13 Tom you ain’t got a blow torch I can borrow have ya? Haha 😉

[@PlumbLikeTom]

Thanks for watching as always mate, to be honest I could have done with borrowing a heat proof mat

[@andrewoleary9704]

How do you stop your plastic pipe sixes from tracking?

[@PlumbLikeTom]

I find if you score the pipe lightly round once, then press a bit harder on the next rotation it doesn't normally track, I have been using the ox cutter a while now and find it very good, thanks for watching 👍

[@thomascoyne157]

Look’s really nice Tom I hope mine turns out as well when it gets finished what the panel call and do you know if they come in 850 w good job 👍👍👍👍👋

[@PlumbLikeTom]

Thanks for the support mate, these were trespa panels on this job, the units are custom built to suit and we just assemble on site, it's a recycled plastic I believe, very hard wearing, fully waterproof, and the colour goes right through so it is difficult to scratch

[@thomascoyne157]

@@PlumbLikeTom thanks Tom

[@ursusmaritimus7159]

Hi mate, what laser are you using? Cheers

[@PlumbLikeTom]

I use the bosche 360, the laser itself is bright but for the money there are probably better ones, my big annoyance with it is the fact its not rechargeable and takes 4 AA batteries, they last a while but most professional ones now are rechargeable, thanks for watching mate

[@RANDEEP685]

Hello mate where abouts are you based?

[@PlumbLikeTom]

I'm basically in Lincolnshire