A New Airsoft Brand Emerges? | Airsoftology Review

[@tonyhamilton7785]

I like that there are new brands starting to emerge because it tells that Airsoft is still alive and kicking. Any new brands and guns are always welcome

[@jakes1235]

I knew there was a reason for me to stay up until 5 am

[@petrvatras5451]

So.. About Arcturus.. I got "Centaur A Carbine" about 8 months ago, serial number 172, so I was pretty surprised by that. Gun is awesome, for its price point, the build quality is amazing, no issues so far and one big plus., it looks way different, which I like. Have not seen another one of those and I would really buy another one of those. :)

[@DrakoAltior]

I used to have that gun and I was very happy with it, the space for the battery is so small and not all mags feed well but once you get it to shoot, it's not bad.

[@sleepycult]

CARLOS11540 (YT) what’s the gun

[@guysmekens429]

Can u put a tracer on it?

[@DrakoAltior]

@@sleepycult arcturus at-ar03 available on Taiwangun

[@DrakoAltior]

@@guysmekens429 perhaps, if it's slim

[@MB-tc7tw]

Do you know how well EPM1s fit in it?

[@clayman0430]

I don't play airsoft I'm looking to get into it but a new company is always a good thing

[@CaptianMoePedro]

clayman0 skycade it's alot of fun a few tips from a current player. Eye/face protection and Shoes are just as important (or more) as the gun you are using. You probably already know that though. Have fun and call your hits being my last 😁.

[@CaptianMoePedro]

Thomas Barnhart that too! 😂

[@j1b00m7]

If you haven't got a gun yet, I really recommend the G&G CM16 M4's. Its the Honda Civic of airsoft. Will last years without breaking. Years.

[@tomatoman3706]

j1b00m or if you have the money I own a krytac and there amazing!

[@j1b00m7]

to be honest krytac isint that beginner friendly. they cost quite a bit of money and is a bit overkill for someone getting into the sport.

[@theforgottenairsoft7634]

it has kindda a honey badger style and i love it!

[@Rifaa_Inertia]

The Forgotten Airsoft Yeah right? This could really be an alternative to the Amoeba Badger! They'll be around the same price, with this being full metal, but the Amoeba having pretty good internals...marry please?

[@theforgottenairsoft7634]

i own a Ares Amoeba Badger (not the current gen) and i LOVE it its on par with my polar star me and 2 other team mates run amoebas so it would still be a hard choice between the 2 i would have to hold and shoot this thing first hand before i say its a good alternative as the Amoeba i am after 3 years still running fully stock the thing is a beast

[@Rifaa_Inertia]

I'm running one as my primary as well (although it's not quite stock anymore, since I enjoy tinkering), which is why I commented in the first place xD You got a point here, without actually handling the Arcturus I couldn't tell if it would have a chance of surpassing it... It might be possible to use the Amoeba internals with the Arcturus' metal body, though~

[@andrewbeaton2087]

to be fair, with a burst wizard or similar, it might be on par with the amoeba innards.

[@Rifaa_Inertia]

Andrew Beaton Possibly, yes (and I would hope so). Having an actual contender for quality AEGs would be fantastic!

[@spade_customstv1745]

Everyone complains about to many M4 variant rifles out there, witch I get that cause there are alot, BUT None of these company's would still be alive of they stray away from the M4 platform. I LOVE the M4 platform and will never use anything else.. Great review Jonathan, thank You

[@alefruci8193]

I personally agree especially when it’s a 9mm version

[@rklessars0763]

HooliganTV wha about the new vfc mp7 aeg ;)

[@WhiskyBeard]

The one exception being LCT. Their HKs and AK variants are all top-notch and popular. You can also kiiiiinda throw CYMA in there since they sell a ton of AKs.

[@pmp1337]

And JingGong with the G36. TM with the hi-capa and the VSR. You don't need M4s to sell.

[@jfk-.9345]

Agreed but if you think about it everyone copied off of Tokyo Marui so it's kinda easy for them to make gums😂😂

[@creativecore77]

This is actually cool for an m4, I’m surprised so much is included! Usually you are lucky to have a battery in the box.

[@DavidLee-df888]

warmcolour Yes, but normally any battery and/or charger included are not of the highest quality especially for lower priced AEGs. So unless you are a complete beginner with NO gear at all, you would only use the included battery and charger until you can buy better later, or use your own battery/batteries. But you are right, this does look quite good with a lot for the money

[@CrystianWilliams]

Hey Jonathan, I was wondering if you’ve ever heard of a company named Arbor Arms, the basic breakdown is that it’s a private owned business, owned by two gentlemen named Jonathan (ironically) and Nick. Both of whom served in the military respectfully and outstandingly so. Jonathan as a Scout Sniper and later instructor, Nick as an Army Ranger. After retiring Jonathan worked for Ares Armor and worked his way through the ranks until a dispute with the new owner made him leave the business. A few years later he started up Arbor Arms with help from Nick. They hand sew and manufacture plate carriers, vests, pouches, and a few other goods. I personally own their FLEX CAS plate carrier which is an amazing piece of kit. It has this elastic cummerbund that forms to you and holds the vest just as well with a much higher level of comfort, it also is equipped with cobra buckles to clip instead of having to lift the massive flap to Velcro the cummerbund down. I was just wondering if you could maybe give these guys a look see and maybe even review their stuff because I’m really avid about the small American businesses that are out there. Especially ones that make amazing gear like Odin Arms and other companies. Jonathan himself is an amazing guy and very respectful, I accidentally ended up calling the company at 1am forgetting about my time zone difference... turns out his place of business is his home. He was really cool about it and did not seem annoyed at all, I sure would have been. But he answered my questions and even got the kit out to me the very next day. Please give them a look, their gear is amazing and worth every penny. Thanks a lot for the videos and work you put in! I learn a ton from everything you post. Links: arborarmsusa.com/product/flex-plate-carrier/ arborarmsusa.com

[@PedroSantos-mf2px]

Hi there. I have of these... The only rant's I have is that some mags doesn't feed well and the bolt catch realease button fell off. With the g&g mids caps it works fine. It has good trigger response and excellent accuracy.

[@SparkyMTB]

I really wish airsoft company’s would move away from the standard tamiya & over to deans as more players use deans these days & saves the consumer time & money converting it over..

[@philcarraturo1919]

Anyway to get a 14mm silencer on it ?

[@SamuraiHonor]

"There's another player in the M4 category" Me: *groan* M4's kind of feel like bread, for every meal, for every day of the week.

[@jerretgreen2014]

Until you actually get into Airsoft

[@callsignvail9020]

Bring me the c a r b s

[@undeadzombie7271]

The only thing I'll take over my m4's is my mp7.

[@hiddengem2776]

That is why I run a vsr10 platform. With a silenced sidearm, and of course, a rusty knife!

[@vistelle]

Would you like water with that?

[@OfficialMutatedFreak69]

What the price for US or do you have link

[@rogerj412]

It's not a US market gun yet. Either way the price Jonathan said of low $200 range is in USD. If it was only around $200HKD that would be like $26USD and that's not right just looking at it.

[@ivanrivera8514]

It's around $230 USD if you search online

[@nineh9739]

at 0:25 a piece of food falls out of his beard and onto the table.

[@leslamberts0072]

I bought the gun in canada and it came with 2 polymer arcturus mag(mid and high) and came with a normal pair of sight (magpull type)

[@kinangeagle133]

Are Hicapas a category of a gun? Cant a glock be a hicapa cause of the mag? I dont get it

[@georgewhitlow7743]

Surely if an enemy player is close enough to you that you need to switch to iron sights over an optic (obviously optic dependent, but let's say an Aim point Micro red dot) the trajectory caused by the hop won't matter as the bb will hit before it has a chance to curve?

[@its_VAFELZ]

I'm purchasing the Arcturus AK105 later this month. Seems to be kinda par with LCT AKs on paper but still pretty new so ppl around me are not sure yet

[@DrakoAltior]

Me and some friends have that model and we're amazed by it, we love how it works and its design. We only found a problem, certain mags don't feed well because they're too loose, aside that, I'm very happy with it.

[@sanstheskeleton6180]

CARLOS11540 (YT) where did u pick it up?

[@DrakoAltior]

Sans the Skeleton in a local store in Barcelona, Spain. It costed 180€

[@TheMagicalTouch]

What size battery should i get? Im looking at buying this gun.

[@DrakoAltior]

The smallest size battery you can find, the space for the battery in the pdw model is so scarce. I always bring two 1000mAh batteries with me.

[@arthurmackintosh6154]

whats the model called

[@BigCheese85]

Subscribed and ordering. Your reviews are clear and cover what you need to know.

[@casinodelonge]

Hi Jonathan, nice review. I got the Arcturus AR-15 a couple of week ago and my thoughts are similar to yours. I've not gamed it yet, but she is a very handsome gun. I don't like the oversized mag release, they didn't give me a spare. Also the mags rattle like mad as does the stock. I swapped the stock for a G&G Firehawk stock and used the Arcturus on the Firehawk as I modded it for an external battery carry and didnt want to ruin a nice stock. My main issue with the Ar-!5 was that with an 11.1 lipo, when you change down from full auto to semi, the motor seems to overspin and give you a sort of 3 shot burst feature. You have to full auto to safe then back to semi for single shot. Its fine with a 7.4 though. The flip up sights are pretty horrible as well, so I put the nice ones from my LVOA on it which is much lovely, as you say, at a price point of 200 euro, its a lot of gun if it stands up to use.

[@nathansinclair3122]

I just ordered the Arcturus ar06

[@powlo1382]

I thought you'd probably look at the Arcturus Centaur B as that looks quite interesting, Arcturus are owned by MOS who also own E&L so in theory they should be very good quality, I'd be interested to know your thoughts on the Centaur B

[@tomascerny7372]

Got Centaur B and its great. only change nozzle for beter seal (stock got poor).

[@georgelambo5145]

I have a centar b in the us and its great externals and good fps at 395 and very accurate. I've only upgraded the motor to an asg 40k motor for better trigger response.

[@cornepiek]

If the tilt sights was left handed sights, you can still functionally use them as "offset sights" while still hilding the gun more or less upright

[@PeteLeong]

Love the vids! Greetings and question for you from across the pond in Okinawa. Being limited to 1 joule and .2g BB's what kind of upgrades would be beneficial for my rifles? Thank you!

[@AnvilAirsoftTV]

Do you know who the OEM is?

[@ShetlandTec]

Looks like a vfc/elite force reciever style

[@Teneh]

They seem to be the OEM.

[@deanwilson8748]

Looks like nuprol freedom fighter

[@AnvilAirsoftTV]

Dean Wilson doesn’t it just.

[@deanwilson8748]

Yeh bud, right down to the microswitch trigger

[@haloallsurfacecleaning1535]

I have one of these on order but finding it difficult to get a 600mah battery. What size 7.4v lipo do you think I could go to and it still fit.

[@AirsoftNation]

Do they have any other products yet?

[@battlebirdbricks8892]

I just picked one of these up and can not find out what battery to run in it that’s small enough not to put stress on the connection cable, anyone have any suggestions?

[@elliottselman6746]

Can you put a buffer tube, and a regular stock on this?

[@ollieeve34]

What battery would you run this with/ did you test it with?

[@A.P_Productions]

I feel like the sights would suit cqb players more. This is because everyone is close together and the hop hop won't make a massive difference. I might be wrong but it's a bit like tilting your pistol when shooting round a corner.

[@thedukeabides473]

does the bb hop/spin realy get affected at the short range you would be using the 45 degree sights at? i want to run a pair on my rifle when i set my build up after COVID mostly for aesthetics, but i always assumed id use them for targets at reeeaaaly short range so i didnt think the hop jump would affect it too much

[@kiamcd92]

Hey what's your opinion for somebody who doesn't play Airsoft very often because of the fact that they are busy with work and stuff and usually don't have the weekends off but when they do they usually go out and play with their buddies should they get a high-end expensive gun or would it be fine if less expensive stuff but more like used and rebuilt items to have kind of a small stockpile or arsenal of Airsoft guns

[@pilolar3]

How long can your inner barrel be before it starts to hurt your distance rather than improve it?

[@briancheapshot]

what battery are you using on this that fits it petfectly?

[@stephenmitchell7778]

Where can I get one

[@xN1X0Nx]

Is the raile 8inch or 9inch? I cant tell

[@phender1979]

do a how to for painting a gun please please please

[@ysteinDybHanssen]

How norwegians do it kzbin.info/www/bejne/jpjPZoavmtVoqM0

[@fabulous55641]

Look for tutorials, Google is your friend xD

[@pingle7791]

what battery can you fit in this?

[@Spacey_E90]

Does it come with a battery

[@bigdraco151]

Were can i find this gun

[@jasonmoran1179]

If ordered for US shipping will they slap an orange tip on it??

[@lalshortshot2051]

Is painting a two tone slide olive green iligal in uk

[@csb2007]

Can you use a g2 gear box or wat after market parts is comp wit

[@macnoapple3357]

Will we ever see a rotating hop up that will allow players to hold our guns at an angle or even shoot sideways and not make the B.B. fall off or curve?

[@blazmarenk7360]

Hi! Do you maybe know when will the PDW be avalible to buy in Europe? Can you review the PDW gearbox?

[@jaredfellows1030]

Should I get this or the Krytac?

[@charlesb7831]

I looked at one of these in my local shop and was blown away, this unit is solid! Will it replace my Systema PTW, probably not. I am thinking of picking one up thoe, because it's so nice! Keep up the great video's!

[@beebo4481]

Turn on captions at 8:30

[@lucarodrigues823]

Hey Jonathan,

[@jtimms7857]

Do I put a silencer on that Arcturus PDW??

[@borisfarjaudon1163]

Wath batterie does it take for this replica please

[@RyKnowsBricks]

Sub 50 an sub 100 optic for my krytac SPR ?

[@dinodengaming]

Hey Jonathon, Recently I picked up a Tacticon Armament Predator V1 Red Dot Sight | Green Dot Sight | VETERAN OWNED | Rifle Optic Reflex Sight. It was dirt cheap on Amazon so I didn't have high hopes for it. After a few weeks of play with it, I am really happy with it based off its price point. I'd love to see you do a review on it and hear your thoughts.

[@reJECT0]

lmao

[@austinholmes4417]

Love to see you use it in game play, Love the show.

[@lukethompson7970]

I love my Arcturus ar06 the only thing I am not a fan of if is the proprietary gearbox, I tried to install a Titian and yea I had to buy a vfc gearbox shell In order for it to work, other than that, it’s awesome

[@JS-yp6gw]

Where can I get this if I live in the U.S.? Any good sites it's on that ship to the U.S.?

[@johnnylong2049]

You cant get your hands on a nemesis x9? Would love to see your intake on it

[@hwjucal9365]

yeah. ARCTURUS is kinda popular now here in 2020.

[@alefruci8193]

Can I put an m4 f1 hpa system in this without any modification? Someone please respond I’m new to airsoft hpa

[@enricoberlenghi356]

where do i buy this

[@MisterD90x]

Ive got the AK Carbine here in the UK, i love it! proper sweet shooter!

[@kikorro555]

can you talk about the Arcturus AR15 Lite AT-NY02-CB I would like your opinion about the replica before going to buy it

[@FourSoxFans4]

Is the Krytac Vector worth it? I know people say the trigger isn't the best. Do you think they will fix this issue and come out with an updated version?

[@ThatOneFriendlyDude]

FourSoxFans If I’m not mistaken, there was a video made that compared the KRYTAC Kriss Vector to the G&G ARP9, which ultimately determined that all but four things (out of 10-12 categories I think) favoured the $210 ARP9 over the $450 KRYTAC Vector, and two of the ones that didn’t favour the ARP9 also didn’t favour the Vector: they tied in those two categories. If you can find it, it’s worth a watch. If they do improve functionality and price, I’d buy it. But for now, I’d rather just grab an ARP9 for a Glock-mag AR platform. QUICK UPDATE: Here you go. kzbin.info/www/bejne/j6a9hmiJntygnsU I wonder if someone’s going to make a GBB ARP9 that uses G-series mags of some sort? That’d be amazing.

[@FourSoxFans4]

ThatOneFriendlyDude I've investigated the G&G ARP9 and it wasn't really the gun for me. I'm trying to mainly decide between the Vector and the ASG Scorpion Evo. I've shot the Evo before and was very happy with its performance. I have not shot the Vector so I'd be going off what people say about it. The main concern for me is the trigger. Some people say it takes some getting used to while others say it's garbage. Im just having a tough time deciding between those two airsoft guns

[@1lausunU]

Compare to the g&g arp 556?

[@Morecocoapuffs]

I just bought one of these lemme say this thing is an absolute beast and I love it! Your video helped clinche this specific model as I've been tracking Arcturus for some time one question I have is does the stock actually detach from the weapon I can't seem to get mine off to access the quick change better lemme know thanks!!

[@belowaveragegamer8631]

Do you have a review on the lancer tactical gen 2 keymod

[@CadensCustomWorks]

I need more info

[@berserker703]

so cool , how much is it? also is it in the states yet? can we import it? do they have a website we can go see? because I didn't see one in your link list. with a wide mouth do you think they will paint that orange if we have to import it? I like the those mags.

[@kimjongun2536]

berserker703 Jag precision are bringing them in later on in the year they retail around €230-250 mark I'm europe

[@666Wo0k]

For Europe... Taiwangun in Poland A, B, and AR15

[@headwrinkle9896]

Are there any airsoft guns that are waterproof? Meaning they are designed to operate after being fully submerged?

[@batumav1981]

Looks great would love to see the mid barrel length

[@batbear1142]

Ok I am now waiting for the Arcturus Regulus in Black edition

[@71stMastiff]

@Airsoftology what's the name of this gun, there's no name in the description?

[@LAWNLOBSTER]

I don’t see why anyone would buy this thing when there’s already established brands with guaranteed quality and already look pretty much the same

[@georgelambo5145]

i have the ak ct-02 and the quality is amazing

[@OmiXSV]

Random question but I've been watching for a while and I think you might know if it's possible to replace the stock of a Krytac Mk. 2 PDW with a Krytac buffer tube and crane stock seen on like CRB?

[@noahpohlson7540]

The canted sight is neat.

[@callsignvail9020]

Hype to try it out sometime!

[@Josethemoor]

I know this video is more than 2 years old but maybe someone can answer me this: is the barrel threaded 14mm? Because I do like a silencer on my replicas and would like to put one on this too if i buy one. :)

[@NitroBex]

The trigger sounds like an omron switch.

[@samcrosby9255]

Is that the centaur b in the background?

[@wiltuga1154]

What mags can i use with this gun?

[@dainiusvysniauskas2049]

Most of M4 mags should be compatible. People have had good luck with Kublai

[@natecataldo1136]

this comes out of the A&K factory. Easiest spot every from the grip.

[@darealdiggyguns6008]

i am a kid and me and my friends are looking to get into airsoft can you do a video on maybe how kids should start airsoft

[@StefSchuddinck]

bdw do u have anny tips to make some mags work whit others replica's. a friend of mine just bought new mags but it dousnt feed that good for his airsoft gun. there is like a little wiggle possible so anny solutions?

[@kimjongun2536]

Wolfmen Gaming put velcro at the back of the magwell to push the mag into a more forward position causing it to feed better

[@DavidLee-df888]

Wolfmen Gaming try some Velcro (the fuzzy side obviously) in the magwell. Or a few layers of electrical tape works well I find, since Velcro sometimes gets dirty and gets compressed over time.

[@StefSchuddinck]

allright! thx for the tip!

[@Sirialy]

Okay, is it v2 gearbox? I wanna HPA that.

[@Nyasiu]

Yup, v2 gearbox

[@Sirialy]

hm, i wanna try and drop a jack in it,see how it performs. Also i wonder if i will be able to fit other mags in there too as i want to use PTS.

[@im__sam]

Ye it is. Looks like a great donor gun as well.

[@hellspawnairsoft2214]

How many monies is it

[@Jon-rc2yy]

what should my first airsoft gun be?

[@aalese7087]

Your reviews are the best on KZbin.

[@sogerc1]

Obviously you haven't watched many youtube reviewers. Some people actually shoot the guns, take them to games, tell their experiences with the gun etc.

[@opairsoft8100]

sogerc1 or say what they don’t like about them

[@sogerc1]

OP Airsoft exactly

[@logannaeher3573]

sogerc1 and the price

[@brandon_g_airsoft3078]

I wonder if they would make the AEG version of the KME45

[@Emerald_Manos]

Will this be released in Japan?

[@Tom-dz5vi]

No cuz it’s full metal

[@Emerald_Manos]

@@Tom-dz5vi it’s been released in Japan. Lol

[@MrGoogle87]

Forgot the shooting test??

[@GideonHarrisYT]

Haha I'm like that too, I love getting the loudest gun I can find and scare the heck out of people

[@kalashniben9005]

This looks nice - I’ll wait for a carbine / mid-length version.

[@isaacshively6705]

Does it have a mosfet and what diameter is the inner barrel? And I like the look of the sights, I understand what your saying if you tried to use them your bb would hook and go sky high or hit the ground ten feet in front of you but the remind me of John Wick

[@miitch99]

I'll wait until someone does a full teardown of the internals before considering. It seems WAY too good to be true! :)

[@aswadcamil]

yo i'm thinking the same thing, i cant find any info on the actual internal, it has a micro switch and is lipo ready, but no mention of a mosfet. How can you handle a micro switch trigger and a lipo?

[@Bull_10RR]

yall found out anything?

[@staedtler8621]

AstKilo23 made an excellent reviews and full tear downs of the gearboxes from couple of Arcturus models. Search him up.. these are wonderful guns btw

[@Jbabcock93]

Normally not a fan of newer style AR's as I feel they look too flashy and goofy. This one, however, I like! Looks clean and simple, I might look into this one more!

[@jakekirk9847]

you should do a review on one of the adaptive armament guns