A quick look at the SAB Goblin Fireball.

  Рет қаралды 10,485

TRAXXAS6606

TRAXXAS6606

Күн бұрын

Just a few small things I've noticed in the build of my fireball. A full speed build video is to come soon.

Пікірлер
@reginaldmcnab3265
@reginaldmcnab3265 3 жыл бұрын
Nice heli man and I like the camara angle too! Often I see videos and the camara is just looking down at the heli but this one has a good angle. I want of this heli.
@rtrent3988
@rtrent3988 7 жыл бұрын
Good review, looking forward to the flight.
@Gavs_rc_hobbies
@Gavs_rc_hobbies 3 жыл бұрын
I have one of these coming and i have a mini brain2 for it and I would like to know how do you set up the govenor for it it seeing as the motor is direct drive? Do you set the main rotor ratio to 1.00 on the Brain2 setup program?
@johnbess7320
@johnbess7320 2 жыл бұрын
Having issues with my cyclic servos not syncing together any help would be appreciated.
@ronaldopassanhadesousaguer7581
@ronaldopassanhadesousaguer7581 4 жыл бұрын
Do you add tape into the tail boom to solve the wag issue? If yes, What type of tape? Thanks
@TRAXXAS6606
@TRAXXAS6606 4 жыл бұрын
I don't. I never had a tail wag. I freak people out and show them the play In the boom but it has never effected me in flight. I've got over 325 flights on it and have crashed it over 10 times now. Still going strong. However, I have seen people use tape and it'll either be electrical tape or 3M double sided tape in between the boom and the frame. Hope this helps you out! ;)
@ronaldopassanhadesousaguer7581
@ronaldopassanhadesousaguer7581 4 жыл бұрын
@@TRAXXAS6606 Thanks.. Obrigado..
@zx6rage430
@zx6rage430 6 жыл бұрын
Didn’t you have any problems for mounting the satellite in that position?
@aquaden8344
@aquaden8344 7 жыл бұрын
The servos are SAB servos. I don't know the difference to the BK servos, but I asked Stefano, the designer from SAB, and he insisted, that the servos are different products.
@ChristianOjala
@ChristianOjala 7 жыл бұрын
Hey man nice video! I'm wanting to do my first heli build and I've been looking at the fireball. Is it good for a first build? Any tips and tricks? Any help would be appreciated!
@TRAXXAS6606
@TRAXXAS6606 7 жыл бұрын
Christian Ojala This was my 4th heli build and by far the easiest. I would recommend this to a first-time heli builder that knows a thing or two about helis and is ready to build their first one. This heli went together so smoothly and quickly. Only trick I'd have to say is to run the ground wire through the boom and glue it. That way it isn't an eye sore on the outside of the boom. :) Hope this helps. :) And thanks for watching.
@ChristianOjala
@ChristianOjala 7 жыл бұрын
Sweet man thanks! Do you know when the time lapse build will be public? And did you do any setup on the computer or did you just build it and bind the radio and you were ready to go? Another question is which do you think is better, a torque tube or a belt drive?
@TRAXXAS6606
@TRAXXAS6606 7 жыл бұрын
Christian Ojala I programmed the BeastX through the light codes. Though, I will be swapping it over to an MSH BRAIN2 soon. And I like both really, belt for the smaller helis and torque tube for the larger models.
@Golgafrinchamdent
@Golgafrinchamdent 7 жыл бұрын
Thanks for posting. Are those links and DFC arms all solid... no adjustment?
@TRAXXAS6606
@TRAXXAS6606 7 жыл бұрын
Stringfellow Hawke I haven't had to adjust them yet. the DFC arms can be adjusted bit i haven't needed to.
@ivango9232
@ivango9232 4 жыл бұрын
Hi! Which regulator do you use? 60A?
@TRAXXAS6606
@TRAXXAS6606 4 жыл бұрын
The SAB 60A (Hobbywing 60A ESC has a BEC (Battery Eliminating Circuit) rated from I think 4.8V to 8.4V built in.
@kwaaaa
@kwaaaa 7 жыл бұрын
Will this fit KST DS215MG servos? Or will it require those SAB servos?
@TRAXXAS6606
@TRAXXAS6606 7 жыл бұрын
kwa Yes, they are micro servos and will fit this Heli. :)
@blakeromjue9303
@blakeromjue9303 7 жыл бұрын
Hey traxxas6606 do you still fly on real flight 7.5 and could you give me some lessons thankyou
@TRAXXAS6606
@TRAXXAS6606 7 жыл бұрын
Blake Romjue I do but I rarely go online because my internet is just terrible. Maybe if I can get on a better internet but that's rare. And when I can, it's usually unppanned. What are you wanting to learn? planes or helis?
@blakeromjue9303
@blakeromjue9303 7 жыл бұрын
TRAXXAS6606 ok if you do get online let me know im on a lot of the time
@blakeromjue9303
@blakeromjue9303 7 жыл бұрын
Planes
@themanthemyththelegend1392
@themanthemyththelegend1392 5 жыл бұрын
Eeewwwwwwww BeastX man I used AR71XX beastX for like 10 years went to VBAR will never look back... After flying VBAR will say it has a much better feel, dunno just like it better.
@themanthemyththelegend1392
@themanthemyththelegend1392 5 жыл бұрын
It will auto tho..... 100 Percent
@TRAXXAS6606
@TRAXXAS6606 5 жыл бұрын
6 String Terror HAHAHA. With 100% negative pitch.
SAB Goblin Fireball Rebuild
15:06
WestHobbiesRC
Рет қаралды 3,8 М.
Crushing Huge Lithium Ion Batteries with Hydraulic Press
11:26
Hydraulic Press Channel
Рет қаралды 1,8 МЛН
I Sent a Subscriber to Disneyland
0:27
MrBeast
Рет қаралды 104 МЛН
Counter-Strike 2 - Новый кс. Cтарый я
13:10
Marmok
Рет қаралды 2,8 МЛН
Mini V12 On The Dyno - (How Much HP Do These Mini Engines Make?)
16:31
Sab Goblin Fireball helicopter review
6:55
Nitrokyosho
Рет қаралды 4,9 М.
Level 1 to 100 Science Experiments
15:53
Hafu Go
Рет қаралды 19 МЛН
RealFlight 8 Introduction
10:56
TRAXXAS6606
Рет қаралды 49 М.
Goblin Fireball #2 // Maiden flight and setup tests // Simone Zunterer
14:09
Can Giant Wood Block STOP 300 Ton Hydraulic Press?
15:03
Hydraulic Press Channel
Рет қаралды 918 М.
I Sent a Subscriber to Disneyland
0:27
MrBeast
Рет қаралды 104 МЛН