A real LEGO Icon with a major flaw - 10330 McLaren MP4/4 & Ayrton Senna detailed building review

  Рет қаралды 208,131

RacingBrick

RacingBrick

Күн бұрын

Пікірлер: 409
@RacingBrick
@RacingBrick 10 ай бұрын
Check out the local prices and availability in the LEGO Online Shop - racingbrick.com/product/10330-2/
@RJ1.
@RJ1. 10 ай бұрын
hello
@mioszantas4462
@mioszantas4462 10 ай бұрын
As much as it's a bummer that the rear wheels aren't as wide as they're supposed to be, it's good to see that LEGO is taking steps forward with actually making smooth tyres this time!
@knightrider9694
@knightrider9694 10 ай бұрын
For sure. I didn’t buy the technic McLaren because it didn’t have smooth tyres. I believe Daniel Ricarddo also mentioned that in the reveal . Why it has wet tires
@betulaobscura
@betulaobscura 10 ай бұрын
Size of rear wheels is a joke.
@PR3M3
@PR3M3 10 ай бұрын
Agree.
@sahilrohra5585
@sahilrohra5585 10 ай бұрын
Absolutely agreed. The rear wheels for even the smaller sets are small.
@Asytra
@Asytra 10 ай бұрын
Yeah makes it look like a Formula Ford
@FastbeeNotabee
@FastbeeNotabee 10 ай бұрын
Not only the wheels bother me the white on red prints look soooooo of collor i dont like it
@tregoboing
@tregoboing 10 ай бұрын
Its a yoke, a yoke!! (Fernando Alonso reference)
@klisurovi4
@klisurovi4 10 ай бұрын
4:05 I believe the Shell pieces are printed because they get partially covered by that piece of the nose cone at 4:20. Lego were probably worried a sticker might cause clearance issues or get damaged by the piece on top
@Nam3y123
@Nam3y123 10 ай бұрын
For the 1x1 prints, there's also the fact that they are non-obvious prints, so having all white 1x1s have the print makes the build easier because there's no chance of using the wrong one
@jamesbuckingham77
@jamesbuckingham77 10 ай бұрын
Yes you're not allowed to have tobacco branding on items classified as toys. Also, the Mp4 4/4 did run at some GP's without tobacco branding as it was banned in certain countries even back in 1988.
@maxmustermann6612
@maxmustermann6612 10 ай бұрын
Yes, but make a rounded chevron like design..
@neothermic1
@neothermic1 10 ай бұрын
The other reason they include only printed 1x1s for the engine cover bag is that they don't want to let you make the mistake of choosing the unprinted 1x1s for the bit that requires the printed ones, and to only realise after you've buried the printed ones into the assembly itself. This is the same reason why set 76906 (Ferrari 512M) contains 6 of the printed 1x1 plates when only two are visible when built. This is one of those building-experience-trumps-price moments that LEGO is good for.
@maxmustermann6612
@maxmustermann6612 10 ай бұрын
Make a fucking ! In the beginning of the manual. Cobi has like 8 different Typen of slopes and stuff is fine
@srrocknroll4755
@srrocknroll4755 10 ай бұрын
Actually rear wheels are exactly 50% wider. 25x10x13 front, 26x15x13 rear
@AlexJasso100
@AlexJasso100 10 ай бұрын
Where did you get those figures? Google says Fr: 11.75”, R: 16.25” Thats pretty much 40%
@rogerhalt3991
@rogerhalt3991 10 ай бұрын
An ‘Icon’ set that is actually iconic! Shame about the wheels, didn’t notice it at the reveal
@CrazyChemistPL
@CrazyChemistPL 10 ай бұрын
I'm really surprised they didn't go with the wider rear tires as well. They already have the new suspension A frames, with wide rear tires that would allow them to make a whole range of more modern F1 cars for the Icons line, like one of Schumacher's Ferraris from the early 2000s or one of Hamilton's Mercedes' perhaps.
@erich_kubart
@erich_kubart 10 ай бұрын
It’s funny how other companies like CADA can make larger rear slicks and separate from the rims too, there’s should be no reason why LEGO can’t do this properly.
@taylorknight5702
@taylorknight5702 10 ай бұрын
There are more constraints that come with scale than physical capability
@justinthorsson
@justinthorsson 9 ай бұрын
still doesn't explain why cada can do it , if it can be done it can be done simple
@justinthorsson
@justinthorsson 9 ай бұрын
yes exactly why a company like cada can achieve it yet a huge company like lego were to lazy to do it
@movieman75649
@movieman75649 9 ай бұрын
The only reason is money. We idiot customers buy anything, so why put a few more cents in product development?!
@YtseHWSW
@YtseHWSW 10 ай бұрын
I wonder if Balázs will pimp up this set with 3D printed rear wheels. I bet he will.
@retrojb101
@retrojb101 10 ай бұрын
I hope he shares the stl file too 🤞
@idonjohnson6999
@idonjohnson6999 10 ай бұрын
Or gets another set and double stack the rears.
@JJle5o
@JJle5o 10 ай бұрын
he should it would be amazing
@matemayer4850
@matemayer4850 9 ай бұрын
@@idonjohnson6999 that might be too wide though
@idonjohnson6999
@idonjohnson6999 9 ай бұрын
@@matemayer4850 true. But better than this skinny wheel.
@Dadudi
@Dadudi 10 ай бұрын
Major problem is not the tire size at the rear but the croocked front nose. I still can't believe how they couldn't recreate a fully straight profile, looks like the front nose is about to fall off, too bad! Also the engine cover under the airbox is definitely too bulky and of course, as you mentioned in the video, those rear tires are too narrow...Anyway just the minifigure is totally worth the set!
@Glegh
@Glegh 10 ай бұрын
Im a huge f1 and Senna fan, but Lego didnt do this car justice, the rear, the front, its all just wrong. Even his helmet. Definitely disappointing.
@LaureaniGotIt
@LaureaniGotIt 10 ай бұрын
Agree, but im going to buy the set anyways lol
@j1m909
@j1m909 10 ай бұрын
Exactly why Lego do this this, they know people buy it anyway so they don't care....
@robertscott1112
@robertscott1112 10 ай бұрын
It would've been nice to see the blue stripe on the helmet
@matemayer4850
@matemayer4850 9 ай бұрын
@@j1m909 They should have hired some F1 experts when they designed this set
@j1m909
@j1m909 9 ай бұрын
@@matemayer4850 just someone with a pair of eyes would of done
@gonzalodemiguelcastillo5122
@gonzalodemiguelcastillo5122 10 ай бұрын
I believe that the feature that makes taking the wheels off or putting them on the car "faster" than usual refers to the action of changing tires/wheels on F1 pit stops in real life
@RacingBrick
@RacingBrick 10 ай бұрын
I get that one, although I don't see how this new wheel design makes the wheel change any faster.
@MonkeyDawg
@MonkeyDawg 10 ай бұрын
@@RacingBrickthe one piece wheel design and the locking stud represents actual F1 tyre changes - machine first removes the large single centre nut, then a combined wheel and tyre is replaced i.e the wheel and tyre aren’t separately added to the car during pit stops
@RacingBrick
@RacingBrick 10 ай бұрын
​@@MonkeyDawg I know how tire change happens in F1 :) The way the text is phrased in the manual means to me that the new wheel design makes the wheel change faster, but there's really no any difference between this and any other LEGO Technic wheel from this perspective. But that might be my interpretation only.
@mikosoft
@mikosoft 10 ай бұрын
​​@@RacingBrickI interpret it that you don't have to remove the rubber because you actually can't 😅
@RacingBrick
@RacingBrick 10 ай бұрын
@@mikosoft hehe, well Speed Champions and City did that already, so it's not the invention on the year either :)
@coffeeinhandproductions3238
@coffeeinhandproductions3238 10 ай бұрын
Other than the failed rear wheels still a nice displayable set. Builds a lot bigger than expected given the price piece and the scaling is great with the other cars in the line up. Nice to see functional steering on a smaller model.
@Nanokk_
@Nanokk_ 9 ай бұрын
As an F1 fan and someone with an immense amount of respect for Senna, this was overall a pretty cool set, sure its not perfect, but I think the tyre thing isn't a huge issue to me, and does a pretty good job at commemorating one of, if not Formula 1's best drivers ever
@VerdigrisTechnic
@VerdigrisTechnic 10 ай бұрын
Would the tires work better on an RC drift car MOC than LEGO’s normal, more rubbery tires?
@PR3M3
@PR3M3 10 ай бұрын
Hopefully, someone makes a if it doesn't exist already a minifig sized version for obvious reasons.
@stuffing09
@stuffing09 10 ай бұрын
lego is releasing one
@idonjohnson6999
@idonjohnson6999 10 ай бұрын
Many, many MOC’s out there. Just search for Lego MP4.
@TOESOFFICIAL1
@TOESOFFICIAL1 10 ай бұрын
i wish they could just spend a minute or two delivering a wider wheel design
@therandomnarwhal
@therandomnarwhal 10 ай бұрын
I wasn’t a huge fan of this set at first because of the smaller scale, but honestly? I think it’s won me over. The pricing is decent and the build looks really fun! I’m not even an F1 person but I probably will be getting this day 1!
@thomashornsby2833
@thomashornsby2833 10 ай бұрын
Such an exciting set but the issues with the rear wheels and the nose make it a sad but very hard skip
@-Evixity-
@-Evixity- 10 ай бұрын
I think they covered the one by one studs so all the one by one studs are the same so you don’t don’t mix them up and have to take the whole thing apart
@WizardOfOss
@WizardOfOss 10 ай бұрын
Besides the rear tires, that printed piece on the nose is what bothers me most. I mean, I totally get why they didn't do the Marlboro branding (and in fact, the car actually raced like this), but where's the iconic chevron shape? They did so well on the rear of the car, but on the nose it's completely absent. Why go trough the effort of making a printed piece if it's printed completely wrong? Still, I have already pre-ordered it, even when that was mostly just to get the Classic Space GWP....
@hitfan
@hitfan 10 ай бұрын
I have already pre-ordered it. I can't wait for your solution to fix those rear tytes
@ForburyLion
@ForburyLion 10 ай бұрын
If I'm luck enough to get this, I'd definitely be looking for a rear wheel upgrade. Also the colour scheme - Have they made the red parts on the nose deliberately different to the real thing to look less like tobacco advertising?
@arvidekerby9561
@arvidekerby9561 10 ай бұрын
Can you 3d print the back wheels in there "real size", to see how it would look?
@jonasfermefors
@jonasfermefors 10 ай бұрын
I think the white print on the red on the front is almost worse than the skinny tires for me. Couldn't they have done a red print on a white piece?
@officialbuildingwithbricks
@officialbuildingwithbricks 10 ай бұрын
That's what I was thinking. This way the white would have also covered the sides. I wouldn't even mind getting a sticker instead but they definitely should have reversed the colors
@terryfredrick5149
@terryfredrick5149 9 ай бұрын
Did your come pink ? Mine came pink. I can't display the set because of it. Matter of fact all the white decals are a light shade of pink. Do they have any QC over at Lego lmao
@MikkyTee
@MikkyTee 10 ай бұрын
I think they really dropped the ball on this one, the rear wheel size is horrific. Car just doesn't look like the iconic Mp4/4 and more like F3 or something. Shocker.
@Ayden767
@Ayden767 10 ай бұрын
This is a really good looking set. It is something different in the lineup, as this is truly one of the most iconic formula 1 cars in the history. Ayrton Senna was truly one of the most iconic formula 1 racers of all time. I am still trying to find a good deal here in the U.S. for one, as to me, it is just a bit overpriced (even though the silver pieces aren’t cheap to make, good amount of prints, legendary Ayrton senna mini-figure, and the new pieces). Thanks for another great review!
@MrKlawUK
@MrKlawUK 10 ай бұрын
black half bushings would be nice, or some other alternative for that. and having the suspension not..suspense is an interesting choice. even if it didn’t flex, having them be less parallel (forced by the cross axles) is a bit unfortunate
@douglasberggren7667
@douglasberggren7667 10 ай бұрын
I'm fairly sertain I have heard that Lego only allowes for each theme to add 2 new parts per year (might be diffrent for diffrent themes as they sell more or less set or not) buty it might be the reason that they couldnt make a larger tyre for the rears.
@RacingBrick
@RacingBrick 10 ай бұрын
Thay have way more slots than that. There is a limit, that is true, but they could have planned this properly.
@matzebob
@matzebob 10 ай бұрын
Does your fixing of the rear tire by any chance include the use of liquid resin? :)
@RacingBrick
@RacingBrick 10 ай бұрын
Not this time, I'll try to quickly 3d print (with a filament printer) a mockup to see how it is supposed to look like
@ksp58
@ksp58 10 ай бұрын
Like the set but real sad about rear wheels. Is it possible to buy bigger wheels?
@RacingBrick
@RacingBrick 10 ай бұрын
Not from LEGO, maybe there'll be some 3d printed options
@IJsbeer74
@IJsbeer74 10 ай бұрын
My biggest gripe with this set are first: the buckled nose cone, and secondly the rear wheels. Concerning the Marlboro branding on scale models: usually decals are included, but not always shown, so that the car can be made realistic, without needing to advertise the model with tobacco manufacturers.
@rikomanaro
@rikomanaro 9 күн бұрын
Where do you get the other decals? Mine didn’t come with any
@simonbennett9687
@simonbennett9687 10 ай бұрын
I'm way more annoyed that those new suspension parts don't feature a 2l hole, or at least a 2l axle-hole, than I am that they didn't mould 2 different new wheels.
@bjornroeven7343
@bjornroeven7343 23 күн бұрын
Nice review. Things you’re saying is spot on. Already ordered Marlboro stickers and searching for rear tires. When I have all I’ll build it. Till then my box stays sealed.
@junichi6707
@junichi6707 10 ай бұрын
@ 6:17 Is a little pun/reference to a pitstop
@V8HiluxZX6R
@V8HiluxZX6R 9 ай бұрын
Odd that some of the new sets have moved to paper bags and others haven't... indication of how long some have been in design/production?
@RacingBrick
@RacingBrick 9 ай бұрын
Depends on the factory, the transitioning schedule is different
@jplewis007-yt
@jplewis007-yt 10 ай бұрын
Looks like the store you kindly linked doesn't ship to the UK. Shame. I will wait for a brick link mod with better sticker sheet before purchasing I think. How could they also miss the iconic 45 degree integration of the white to red on the nose cone. That is as stand out as the skinny rear tyres in my opinion. Now if only they did red 5 and the Porsche 917
@nickdrew6863
@nickdrew6863 10 ай бұрын
perhaps they should do the Jean Louis Schlesser Williams Judd from Monza, being as that was who Senna tangled with whilst lapping him, meaning McLaren didn't win every race in 1988, of course a gift for Ferrari, especially after the passing of Enzo Ferrari the month before
@ShortGuac
@ShortGuac 10 ай бұрын
Is it me or does the engine cover look like a great start for a space shuttle?
@tino897
@tino897 9 ай бұрын
This was the first thing that I noticed when they announced it at first. Why are the rears so skinny ? Like I know they are wide, always were
@Josephashwell_14
@Josephashwell_14 10 ай бұрын
Is this part of the creator expert/Icons car lineup with sets such as the porche 911 and the Landrover defender.?
@rarewhiteape
@rarewhiteape 10 ай бұрын
No, it’s a much smaller scale than those.
@pascalduret9248
@pascalduret9248 10 ай бұрын
My question is where do you keep your speed champion...???
@1zieske1
@1zieske1 10 ай бұрын
Why didn't they print red on white for the front? In what setting is it ever better to print white on red?
@terryfredrick5149
@terryfredrick5149 9 ай бұрын
Mine came literally pink. I can't even display the set cause of it. What idiot designed this set ?
@SWSagume
@SWSagume 10 ай бұрын
I plan to gift this set to my dad on easter since he is or was a big F1 fan. However the rear tyres bug me a bit since it shall be a proper display set.... I wonder if there are people who will give online tutorials to 3d print own ones or have alternative pieces that already exist that I could buy. I wanna gift my dad something but uhh dont want to disappoint him with smth inaccurate.
@bk-tr2es
@bk-tr2es 20 күн бұрын
6:16 They are talking about Formula 1 technology, not the LEGO set There was technology implemented to help the car tires be swapped quicker during pit stops.
@bryanwu6973
@bryanwu6973 10 ай бұрын
Are you gonna review the speed champions? I’m assuming you’re still under embargo?
@CraigH999
@CraigH999 10 ай бұрын
Not a fan of the shiny tires. Might have to take some fine sandpaper / scotchbrite to the treads to make them look race-worn.
@an_rc_guy8256
@an_rc_guy8256 10 ай бұрын
I already preordered the car knowing the rear wheels are going to be a visual issue for me. I've heavily debated 3d printing a new wheel/tire to make it look more complete even though it won't look as good as Lego.
@thunder4040
@thunder4040 10 ай бұрын
I’d have loved to buy this set but man the rear tires…it just fails to represent the car’s look in a way I want. I’ll get that off-road buggy instead instead because it’s cheaper with more functionality but I definitely liked this set better.
@mr.platinum-lego
@mr.platinum-lego 10 ай бұрын
How about the 8440 wheels for the rear? Still it is a great piece of history!
@Stereomoo
@Stereomoo 10 ай бұрын
I was thinking the same thing, 8440 and 8445 have much wider 49x28mm diameter tires (which is the usual Icons car size - 49x14 and 49x20, haven't seen exact numbers on these new parts yet). But their wheels were only white/gray/silver, no black from lego. At 1:13 scale, the front should be 49x23mm and the rear 49x35mm so using 20 and 28 wide would at least move in the right direction.
@cr4sh1
@cr4sh1 10 ай бұрын
The lack of width of the rear tyres is bad, also I don’t like the fact the shape of the print above the front axle is wrong (I can almost forgive print quality). Still getting it though
@CosmicAlphonso
@CosmicAlphonso 10 ай бұрын
Why no blue line on senna’s helmet?
@japanfour292
@japanfour292 10 ай бұрын
Lego would never do it, but it's just not the same without the Marlboro decals.
@RacingBrick
@RacingBrick 10 ай бұрын
This can be easily remedied with a few stickers from the aftermarket, I'm sure they'll be available soon
@erikpalacios4279
@erikpalacios4279 10 ай бұрын
@@RacingBrickhopefully I need the Marlboro branding on mine 😂
@robertspooner8777
@robertspooner8777 10 ай бұрын
This is a fantastic model, what a great tribute to the man Ayrton Senna … Can’t wait to hear the fix for the rear tires
@szabolcsnyiraty
@szabolcsnyiraty 10 ай бұрын
I agree with you, the rear is an insult.
@antoineddp
@antoineddp 10 ай бұрын
The suspensions are really interesting!
@happydog_69
@happydog_69 10 ай бұрын
Does the mini fig enter in the seat
@97hondacivic
@97hondacivic 10 ай бұрын
As some who's spent countless hours looking at reference photos and scale models of the MP4/4, the nose is embarrassing and possibly the worst possible way to do it. The wheels are also a joke, they chose to give us 4 front ones instead of going for a middle ground.
@Pshady
@Pshady 10 ай бұрын
You are right it could be better. For those wanting a more realistic mp4/4, Tamiya have it in a model kit if you are up for the challenge.
@MarcMas07
@MarcMas07 10 ай бұрын
the speed they are mentioning in the set is related to a modern f1 race pitstop, where they remove and replace all tires in under 3 seconds!
@marcch72
@marcch72 10 ай бұрын
Looks ok from a distance and perhaps they could only make one mold for the new wheels. The printed piece on the nose looks wrong as it should be a V shape.
@LeeFletcher69
@LeeFletcher69 9 ай бұрын
I found out how to make the wheels bigger purchase 2 more and by more Axel's and it looks pretty good it is the right size as well
@RacingBrick
@RacingBrick 9 ай бұрын
You mean doubling the rear wheels like this? - kzbin.info/www/bejne/b4Soc2yLn9KNmcU I think that's way too wide and looks funny, because you cannot put them in the proper position due to the rims.
@BmxGuyFromNZ
@BmxGuyFromNZ 10 ай бұрын
Hmmmm mabye some drag car wheel on the back would look a lil better?
@samlindow6868
@samlindow6868 10 ай бұрын
do you get anything special for pre ordering this set? ordered it a few days ago but just wondering if there are any real benefits to the pre ordering
@merel101
@merel101 10 ай бұрын
5:10 i believe the printed side should be exposed as its some form of intake
@owene2530
@owene2530 10 ай бұрын
7:16 its pretty obvious that theyre just cutting corners. Lego cuts corners wherever they possibly can nowadays
@SvetlinNikolovPhx
@SvetlinNikolovPhx 10 ай бұрын
Ah, but does the driver fit in the cockpit?
@RacingBrick
@RacingBrick 10 ай бұрын
The minifig fits, but looks like a child as they are totally not the same scale
@SvetlinNikolovPhx
@SvetlinNikolovPhx 10 ай бұрын
@@RacingBrickDaaaang ;( Thanks man!
@grahamhill4113
@grahamhill4113 10 ай бұрын
Yeah, I can't look past those rear wheels. I might even display it without the wheels because the wishbones look good now
@officialbuildingwithbricks
@officialbuildingwithbricks 10 ай бұрын
In both cases, the speed champions and this icons set, the tires are a bit too small and thin. But overall it's a great build
@PatricksFinanzen
@PatricksFinanzen 10 ай бұрын
It’s your saving. A wider wheel on the read would mean two molds and less quantity per tire! Pure and simple, less cost more margin!
@yahyayazgi
@yahyayazgi 10 ай бұрын
1:46 Truly a car with a heart of a brazilian
@guillaume.quignon-Esk8Bricks
@guillaume.quignon-Esk8Bricks 10 ай бұрын
Love easter eggs about Brasilian flag represented inside the car. Like if it was the heart of the car ;-) Saddly, printed nose element seems to be not "totally" white isn'it ? And clearly, biggest mistake is the rear tyres. And i think it is more evident due to the rear wing which is prominent : so it looks like more as a Forumla Renault than a Formula 1 on this point of view 😕 Great review as usual !
@DUNDOM5
@DUNDOM5 10 ай бұрын
Isnt Mklaren british car? Why brazzilians flag?
@guillaume.quignon-Esk8Bricks
@guillaume.quignon-Esk8Bricks 10 ай бұрын
@@DUNDOM5 Because Ayrton made it beat ;-)
@D5DRIFT
@D5DRIFT 10 ай бұрын
Such a shame about the rear wheels. So much so, that it puts me off getting this set. Id never get over it.
@ilaril
@ilaril 10 ай бұрын
I might get this if I find the period correct decals. And the right helmet.
@fossilizer3991
@fossilizer3991 10 ай бұрын
Once I get the set delivered, im probably gonna get my friend to 3D print some bigger rear wheels to make it look more realistic
@Blackout201_
@Blackout201_ 10 ай бұрын
it´s always the same. LEGO produces sets that I, as a fan of whatever the model is about, am really looking forward to but since I´m a fan I just won´t buy it because of course those details like the skinny tires bother me. It´s so annoying, especially for the price. When it comes to the Marlboro branding however: I get why they can´t do it but come on: MP4 stands for Marlboro Project 4 and the livery is designed to look like a pack of Marlboros.
@carriew5106
@carriew5106 9 ай бұрын
Doesn't the reference in the manual to the speed of removing the tyres refer to real life F1 tyres where the wheels are all integrated, rather than having a tyre that is added to the rim? Setting aside the size of the rear wheels, the actual composition of the one piece tyre is more accurate.
@Cosmic_Guy1
@Cosmic_Guy1 10 ай бұрын
Those back wheels are huge
@justinjonpoon4716
@justinjonpoon4716 10 ай бұрын
I would replace the tyres with the set of senna gtr grooved tyres, at least they are different in width. It can represent senna who is good in rainy track
@RacingBrick
@RacingBrick 10 ай бұрын
Those tires are almost exactly as wide as these ones, and they are actually smaller
@RainGTM
@RainGTM 10 ай бұрын
I got too see all of the new sets in person (and the bmw too, but not the audi and mustang) They are really cool in person, I would defiantly buy, especially since they reduced the price of the double speed champions, and for the new bmw, it's 30 dollars instead of 40.
@LegoGBlok
@LegoGBlok 10 ай бұрын
I give it a good 8 for the try, because all in all it is a good set, but it should cost 30 euros less. For that 80+ euro cost, you should have made way better set what we got.
@GeriatricFan1963
@GeriatricFan1963 10 ай бұрын
I've got no issue with them removing the Marlboro branding, however it seems hypocritical to me when they're also releasing their Formula E and Extreme E Technic sets with NEOM branding all over them. That's a Saudi Arabian government funded city project that's evicting and publicly executing the indigenous tribes in the area in order to get the land to essentially build what amounts to a giant greenhouse in the desert. So Lego and McLaren will no longer tolerate the tobacco industry but gives blatant human rights abuses a pass and happily takes money from PIF...
@csabah.6251
@csabah.6251 10 ай бұрын
Szia Balázs! Nice review as always. I agree that the tire details could have been more accurate, but it most likely won't be a dealbreaker for hardcore F1/Senna fans :)
@Nosiy-ke9xp
@Nosiy-ke9xp 10 ай бұрын
Yes! First review of the new cars!!🎉❤
@nickporter574
@nickporter574 9 ай бұрын
Just got it! Cant wait to build!
@unknownmarokaan
@unknownmarokaan 10 ай бұрын
love it . butt i dont like the the mistake of the back tire.s and malboro reclame
@bricdoo7483
@bricdoo7483 10 ай бұрын
looks cool but the rear tires look weird
@拯旧玩具大行动
@拯旧玩具大行动 9 ай бұрын
the funny design on the front nose, made the car looks like a racing damage version.. Haha
@Whiltshire_Staysharp
@Whiltshire_Staysharp 10 ай бұрын
Super fast to remove and reattach is a nod to the pit crew that perform tyre changes during a pit stop.
@originalbluemonkey
@originalbluemonkey 10 ай бұрын
I'm surprised the display plague is a sticker and not printed. Would buyers be more willing to pay $100, if all the stickers are printed?
@FreakoRico999
@FreakoRico999 10 ай бұрын
The front nose printing also doesn't represent the real car, the white/red part should be more going into a triangel then the rounding it does now..
@Thinginator
@Thinginator 10 ай бұрын
Really disappointed the tires and wheels are 1 piece, I was looking forward to mixing and matching them with other rims and tires of that size. Dual molded wheels also makes it especially frustrating that the rear tires are too skinny as making wider tires only would've required one more mold, and wider tires would be so useful for everything from go karts to dragsters!
@DonBolano
@DonBolano 10 ай бұрын
6:15 - maybe a faster pit stop? ;))
@MrKlawUK
@MrKlawUK 10 ай бұрын
0:00-5:32 - perfection so far.
@MaximizedAction
@MaximizedAction 9 ай бұрын
This looked great in the store, but held off from buying it to do some research first. And man I didn't notice the details at first. Would've killed me if I had bought it and noticed the tires and pink sections. Such a shame.
@Y3LLATM3
@Y3LLATM3 9 ай бұрын
As much as I hate the rear tires, I’m definitely picking up this set
@floraptor4713
@floraptor4713 10 ай бұрын
I'm really disappointed about the Senna only version of the car. Why not include 11 and 12 stickers to allow Prost version??? Also Marlboro stickers?
Fixing LEGO's McLaren MP4/4 mistake: The tire upgrade test
5:30
RacingBrick
Рет қаралды 188 М.
McLaren Tooned Season 1 Episode 1-12
31:57
Stephan Ophelders
Рет қаралды 11 МЛН
Правильный подход к детям
00:18
Beatrise
Рет қаралды 11 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 55 МЛН
BEST LEGO sets of 2024
16:57
Tiago Catarino
Рет қаралды 290 М.
Lego Mclaren MP4/4 (Champions Edition) || #lego #f1 #ayrtonsenna
5:59
8 Epic Stories from the Axis Side
1:13:09
Yarnhub
Рет қаралды 4 МЛН
James May Visits Jay Leno's Garage
19:13
James May’s Planet Gin
Рет қаралды 5 МЛН
Modulex: LEGO’s Most Successful Failure
25:21
SpitBrix
Рет қаралды 440 М.
Правильный подход к детям
00:18
Beatrise
Рет қаралды 11 МЛН