A Scrap China Shazur Road Roller That Has Been Expertly Refurbished And Made To Run.

[@michaelguinn5736]

We don't drill holes or "trim" material off, we just "blow" holes with a torch or turn up the voltage & "burn" the excess material off.....my gosh!!

[@bohhica1]

Amazing how dirt can mix with grease on the wheel bearings and still work. But as much weight is here it will be ground down to nothing after a few rotations. I’m sure they remove the grease from their clothes and hair every night to reuse.

[@villiersman951]

i think they work for rag industries🤣

[@Richard-pe4cx]

great to see the art of bodging is still going strong just like this roller should be good for another 10 years

[@brianmalady1190]

They can obviously keep old crap running for ever with bugger all. The way the west is going, could we?

[@japc4326]

The dirt on the bearing will not harm it, right?..LOL

[@mrmyorky5634]

Hardworking men doing a very difficult job with limited equipment. Here in the UK we'd be closed down by the Health and Safety lot for working like this. These lads just use their common sense. You definitely wouldn't want one of those rear bowls rolling over you flip flops. Well done.

[@andrewallen9993]

Or a British standard steel toed boot either!

[@raufjaleel8317]

​@@andrewallen9993 😄

[@TiborVisnai]

Hard work without the correct equipment...but at 15:40 we can see how to destroy all the bearings!

[@xworost]

Эти походу тендер выиграли на модернизацию катков😂.

[@Юрийфедосеев-р8ю]

Рестайлинг.

[@zitel-zemli0671]

Мне такая "модернизация", напоминает Узбекистан середины 90х! Когда все запасы Союзные закончились, и технику ремонтировали у нас в заводском гараже, ну точь в точь как на этом видео! По принципу "я тебя слепила, из того что было!" 😂😂😂

[@dfgggfg]

@@zitel-zemli0671 а каточек-то копия советского, по-моему)

[@zitel-zemli0671]

@@dfgggfg А чёрт его знает!! Вроде похож!

[@nugene57]

it is amazing how dirty the bearings and grease is when they assemble this stuff.

[@bgguy62]

They do not believe in cleaning much

[@andrewallen9993]

That's to ensure it wears out quickly. Pakistani planned obsolescence.

[@raufjaleel8317]

​@@andrewallen9993 it must be maintained as a Formula 1 Road Roller.

[@andrewallen9993]

@@raufjaleel8317 you mean needing a complete overhaul after every race like an F1 car?

[@andrewallen9993]

This machine looks like it has been maintained by Pakistani experts.

[@jklmnk9596]

Hard work-labor intensive job hats off for all..

[@kjoyner1]

I'm sorry I wouldn't call this an expert repair. They do work very hard.

[@tymz-r-achangin]

Calling this "expertly refurnished" is like calling President Biden cognitive after he has the instructions printed on his toilet paper

[@271chrissy]

The tenacity of these men is great to watch. I could only imagine what they could do with proper tools and a modern workshop.

[@sokolov7093]

Без рюшечек и бирюлек "реставрацию" считаю незаконченной 😂

[@Кулибин-ь1б]

Отверстия не сверлим, а прожигаем. Смазку кладём на грязь. Чисто по Пакестански. И это они ещё стараются, так как их на камеру снимают. А что и как без камеры, страшно представить. 😡😡😡

[@stevenhorne5089]

Is it me, or are we missing a few parts yet?

[@geraldguenard4095]

Very hard work perfectly executed. BRAVO. GERRY G. from canada.

[@Rigoknow]

I am always amazed by the process. Great job👍

[@r.h.a.888]

Каток "Ну погоди" еще побегает!

[@АнатолийКотов-б2п]

🤣

[@arthurtomczak8474]

I hope those are electric powered rollers . We have to save the environment.

[@patrickcosgrove2623]

That was a great video. More of these types of videos please ! Well done.

[@lenholloway4390]

I must have blinked and missed the expert refurbished bit

[@lm4278]

I appreciate the way you guys work way harder than you have to. A few simple self made tools and your job would be way easier. But no, you refuse to do it and work your ass off. Putting yourself in danger over and over.. principles. I get it.

[@horstmuller7512]

They can't change it - it's allah's will.

[@BuranStrannik]

Orkz

[@dfgggfg]

За такой ремонт их надо бить ногами, пока все бракодельчество вместе с душой не отлетит!

[@rival9417]

Expertly refurbished?....🤔......😂😂😂😂😂......🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@Юрийфедосеев-р8ю]

Нет самой главной детали, антикрыла.🧐

[@zafaradeel2107]

🤡🤡🤡NPP Zvesda K 36,Ejection seat ! ! !

[@Pashtosongaqeelzadran]

Hard work,👍👍👍

[@malaykhan2067]

Bahut Mushkil kaam hai good work.👍

[@ВоваВовин-з8ъ]

Как то аж жутко стало после просмотра… Сколько дурной, бессмысленной тяжелой работы.

[@stevenhorne5089]

What a joke. 3 Stooges were more efficient than these guys.

[@raufjaleel8317]

These guys are very hardworking, hats off for them.

[@rockymini625]

I wish they had safety equipment.

[@lynnmackenzie9501]

Wouldn't actually call this expert refurbishment.. Can't even clean the debris out of the bearing races.

[@relaxingnature2617]

They removed the wheels to install fresh dirt ..well done

[@canadians2214]

Parts that needed to be cleaned, I did not see anyone doing. Will you also be giving the steamroller a new paint job. I will not be watching the rest of this video.

[@jdboy9]

If a little grease is good then ALL the grease is best!!

[@stevejones7580]

Health and Safety at its Best

[@engchoontan8483]

Nice. Now people can buy new but lousy china construction equipment and send it to you. Same as Brabus, Ruf, ... send the new to get modified and rebadged before putting it "on the road".

[@mcd6249]

Such a depressing job without the proper tools.

[@knobsdialsandbuttons]

Excellent video ! 👍

[@horstmuller7512]

Looks like it's filmed in Marseille, France.

[@walter9724]

My blind grandmother could paint better than that 😂😂😂

[@geowallace9758]

where was it made to run ??????

[@ManMountainMetals]

If you have 2 you should race them 😂

[@haynowbeewv6898]

Good job. God bless you all.

[@DavidHuber63]

Great work, hard work 👍🏻❤️

[@triga7502]

Может вы себе сверло купите???

[@RicardoNeves-wb8zb]

Im so glad im not the owner of that roller!!!!

[@ahmedmechanicoffical]

Great job👍

[@johnhili8664]

OMG 'Expertly Refurbished' this is what I call a redneck restoration!!! Drilling holes with oxy-acet burner??????

[@relaxingnature2617]

Fail ..we wanted to see it painted , looking new

[@ArtMKQ]

This work is not easy.

[@felipesants8936]

Top job mates

[@Beglecov]

Ремонтники от бога

[@AliAhmed-ku3wz]

♥ 😘 from Pakistan 🇵🇰 ♥ 😘

[@alex_medvet]

🤗😎👌👍👍

[@arthurtomczak8474]

Where is the elephant s ?

[@shoebshaikh9559]

They are muslim very talented great bahi

[@lm4278]

That dude welding.... wow. Going to be blind very soon.

[@amazingmachines3710]

Good job as always

[@ΠαναγιωτηςΦιλιππου-ψ1δ]

Αυτά τα μηχανήματα τα βλέπεις μόνο σε μουσεία

[@danger3_255]

wow...looks great

[@aramirez8427]

Awesome Work......

[@ben8457]

Poor Pakistani people

[@rheinfalke]

Steinzeit

[@a.samadmalkani8892]

abhi thik karta hu😂

[@paveltablet7058]

🤨