A SIMPLE CNC PLASMA JOB, BASIC CAD DRAWING AND CUTTING.

Here's a quick video showing the full process of designing and cutting a basic part on my Xtreme Cnc Plasma Table.
FLOOR PLATES EBAY LINK: www.ebay.co.uk...
Support my latest project project, Feed The Mongrel: paypal.me/pool...
MERCHANDISE: urchfab.com/mer...
Support the channel: / urchfab
Instagram: / matt_urchfab
Website: urchfab.com/
Facebook: / urchfab
Thanks to my sponsors..
xtremeplasma.e...
www.inverterfu...
My camera gear:
Camera. amzn.to/2DbvxdD
Mic. amzn.to/2DbyKd0
Tripod. amzn.to/2DxaEud
My name's Matt Urch and I own and run Urchfab welding and fabrication.
I specialise in custom automotive fabrication from building roll cages to complete one off builds. I built the worlds most unique and oldest drift car known as 'The Drift Rod' which can be found on my channel.
So if you're into grinding, welding, fabricating, etc, you're in the right place!

[@FrustratedBaboon]

Your plasma cutter cuts so smooth that it barely needs sanding. Nice setup.

[@micheltebraake7915]

The Plasma CNC makes your life a lot easier, good job Matt.

[@bazmully]

tell the guy you cut the plates for .to send you some pic's in situ. what an awesome machine wish i had one back in the day.

[@alikwindrush8892]

That machine truly is a thing of beauty. Great stuff

[@chrisrutherford3862]

Nice to see your up and running in your new workshop with a smooth flat Floor Good on ya mate

[@TheOldaz1]

Looking good Matt, takes a while to work out just what you can do with CNC, but good to see you're on the right path. This machine also ideal for making the caliper support brackets for drum to disk conversions.

[@murrayandru7527]

Let the tool do the work ! Work smarter not harder ! Awesome addition too the Tool Box ,Thanks for the lesson Matt

[@Mike.Howard]

Love the table! I just find it hypnotising as I use my (non-existing) psionic powers to guide the cutting head along its path :)

[@xozindustries7451]

That cuts nice, much better than others I’ve used.

[@taloot123]

EXTREME CUT quality best plasma cutting i have see in youtube so far.. (except the new new hyper therm)

[@franguzman9540]

You have the tea full of Iron. Nice video.

[@claywithers523]

Reminds me of my school days in the Technical drawing classes, no computers to assist in those days, that Cnc Plasma Table is so handy for making parts and tools. Nice one!

[@koolkar55]

Top stuff Matty. Love ya work Mate. Billy J. We're currently experiencing winter here in Queensland Australia with 9deg C (48.2 F) Nights & 25deg C (77 F) Days. It's a hard life living down under.

[@amyasseektruth8246]

Technology today amazes me...

[@griefy419]

Lovely cuts phat plasma you using

[@lennyhedderwick1770]

When I eventually start up on my own, I gotta get me one of these. Can’t believe how clean the finish is. On point as always young Matthew. 😬

[@t3chnicianb]

Art Work in Steel. My 'Urchfab' shirts are Great! Kudos

[@Urchfab]

Cheers!

[@terencehawkes3933]

Oh I envy you having such a tool in your shop

[@kittonsmitton]

Nicely done as per usual Matt.

[@tunichtgut5285]

I am impressed how well that CNC plasma cutting machine works. Technology has evolved a lot over the last decades. 30 years ago you would have done this on a conventional milling machine - programming a CNC machine would have been to much effort for four pieces.

[@juanarubiopolarmaxbit578]

ME GUSTA EL CORTE,,ES FERFECTO

[@leighbrunskill5481]

Those turned out great mate, cutting very well there, on that thickness material I reckon you could get a way without using the thc, mine is the same machine as yours and cuts great on thick material without thc on, anti spatter spray helps alot on reducing top slag build up as well, keep the good videos coming

[@paulshields6863]

Interesting vid Mat, like your work mate.

[@cliffwill]

dammit. you're really making me realize how badly i need one of these.

[@daviemaclean61]

I definitely DON'T need one of these but I could watch them working all day long!

[@montydog0]

I had exactly the same thing a couple of days ago where I lost the arc during a cut. I thought it might be duty cycle aswell. I had a play with the height controller and was surprised by how much the cut improved.

[@davec200i]

Would be interesting to see the final contraption that these pieces become part of

[@martinultimatevw3779]

Nice vid Matt.. keep on going

[@fambuild]

Good stuff!

[@alejandrobavassonepotedequ1969]

Es excelente la calidad de los corte !!!

[@Urchfab]

I don't know what that means but Cheers!

[@alejandrobavassonepotedequ1969]

@@UrchfabThe quality of the cut is excellent !!! Thank you.

[@keithfoster6000]

Static wheels you use them for caravan storage saves your tyres

[@MalcOfLincoln]

Nice job again Matt. My young friend Tom, who you might have seen on some of my tractor videos works for a laser fab shop.

[@black88coupe]

Sweet. Dig your videos.

[@n8o8n]

What CAD program is this? Extreme Plasma's own software?

[@llessibm]

...impressive

[@ben7lewis]

Great job 👍,but the best part is a cup of coffee on the table while grinding 11:25, it always happens to me 😉 ... and then coffee full of steel🤦‍♂️

[@d.slater3958]

Looks like I really need a cnc for my everlast plasma cutter.

[@bigbird2100]

Maybe put a hole in the centre blank make a great washer etc.

[@gregworkshop5713]

hi good work

[@steveveness3829]

G'day Matt, a nice extra income creation Big Boy's Toy for the Toy Shop😉🙂😀👍👍

[@ehsantootoonchi3697]

How many of these parts you think you can cut with this high quality before changing the consumables?

[@glynwalton5202]

Nice job. I now know how to divide up circles for adding holes to a PCD. Thanks. My table is the same as yours, bought from Xtreme this year. Do you have the Thermacut machine or Hypertherm? Wouldn’t mind the opportunity to discuss settings with you off line. I’m just finalising a fume extraction system based on a down draft principle so my workshop doesn’t get filled with smoke and fumes every time I cut something.

[@xtremeplasma]

R-Tech P50

[@xistance1986]

Yay number1

[@Urchfab]

Have a house point.

[@lewisswaby3808]

I have a 20kw bystar fibre laser😏it can cut 10mm at 7500mm/min and 25mm mild at 1650mm/min

[@retroatx]

I know that this is an older video, but I was curious as to the name of the CAD software that you are using.

[@каналзакрыт-е2ф]

I want plazmorez too

[@mattsan70]

Which CAD program are you using?

[@fernandoh.2609]

Hey my holes come out tapered how can I fix that ?

[@kirstysinclair9021]

The Side ways forces on those hub bearings with 6-8 foot levers is frightening .

[@koolkar55]

Nothing compared to hard cornering. Just think of how much strain on the wheels, tyres & hubs when cornering hard at 70mph. Doesn't even compare to what you are suggesting. I may be wrong & maybe someone may have the statistics that can compare the two.

[@rsz90182]

I am building one of those CNC. Why is your water level so low? Doesn't that metal warp to some extent?

[@jesscneal]

Matt, you shouldn't have to draw all of those slots individually. There should be an "array" command. If you ever need help with anything complicated let me know. 20+ year cad veteran and solid modeler

[@Urchfab]

I will have a look for that later, Cheers

[@ratgreen]

There's an array command in emachine shop?

[@jesscneal]

@@ratgreen I just looked. Apparently not. My god that software sucks. I did find this video showing a very convoluted way to do it though kzbin.info/www/bejne/kJzGn2WbpJZ7eJo

[@jaberalmaawali7655]

what software is used for drawing ? can I convert a drawing from AoutoCAD to the machine?

[@rosaylafuente]

why in smalls circles (radius 9 mm), the conical cut. I have a plasma by hypertherm 105 A???

[@MrAtheHun]

OK here goes an "I know nothing about plasma cutters " question. Is the egg crate style support underneath the workpiece sacrificial? And I don't quite get how you control the depth of cut are you saving the height above the workpiece or actually controlling the length of 'flame/plasma thingy? --- It's only obvious when you know about this stuff. Really enjoy the videos by the way.

[@jesscneal]

Yes the support under is sacrificial. You can change the strength of the cut. Not sure if his is controlled by the software or not. The height off of the material needs to be a set distance which can be set in the CAM software I would imagine.

[@chriscoulthard4947]

You use the machine to cut more supports 😉

[@Urchfab]

Yes its a sacrificial grid. Cheers

[@BalaTheRealOne]

how precise the cut on the 10 mm? I mean u set the hole for 16mm what's the diameter after the cut?

[@Sp1k3Sp13g3l_]

Ten of em,

[@Urchfab]

You get a slight taper on the holes so the top of the holes are a tad larger than the bottom on thicker plate.

[@addzbuchanan]

what cad program are you using

[@davidallinson2501]

Maybe give a quick aerosol spray to the plates to make them look a super professional job. Nice machine and even more useful as you gain experience.

[@Gn0m4]

Any problem to cut stainless steel or aluminum?

[@classicminihaha2508]

Awesome piece of kit Where did you learn to use the software?

[@xtremeplasma]

@ xtreme plasma training day

[@hanshoogendyk2203]

having made these type of things by hand ( centre punch, pilot hole, finish drill) i know how long it takes to make one, let alone four of them ...in modern terms like here no one would mind paying the man what ever its worth to do this job for them....then you can just carry on with the job at hand... provided ofcourse you didnt make a cock up in your ideas drawing you dropped off at the cutting shop. think 3 times cut once....as my cabinet maker Dad taught me 60 years ago. ha ha ha.

[@Urchfab]

Measure twice cut thrice! That's how I roll. Cheers Hans.

[@philipjosephbarker7737]

Where is that brand of machine manufactured ?

[@Urchfab]

Xtreme plasma in Gloucester.

[@sbirdranch]

What CAD software are you using?

[@pmd7914]

My question also.

[@renomacca1967]

keeep the cutouts four spacers and things

[@reecebath4118]

👍

[@luquiogue-fryer6928]

Can you engrave your logo on these jobs? Dave NZ

[@davidr4332]

Just wondering can i buy the same Xtreme Cnc Plasma here in Australia which i doubt it.

[@glynwalton5202]

I’m sure Rob from Xtreme would manufacture one for you. Shipping costs could be a killer as would training in Gloucester,

[@Nelg230]

This be witchcraft!! Can you use it as a light sabre?

[@ldnwholesale8552]

So your drills are now rusting in the cupboard. .

[@Urchfab]

They sure are, I would hate to have to go back to using them. Haha

[@Fattrucker]

I'd Love one at the same cost to me as you got it for 😉👍😎🤣😂🤣😂🤣😂🤣😂 Perhaps when I'm as talented/famous ROFLMFAO P.S. Good video BTW 👍😎 Fattrucker

[@ipaddlemyowncanoe.7441]

👍👍🇨🇦

[@davidlawrencebanks4610]

Mongrel please.....LAG

[@nahuelluna7071]

me want me can't afford me sad

[@bentbike]

Lastly: Me no got no space.

[@MattBrownbill]

me too

[@12121149]

WHY????