I'm sure that a few of our regular viewers will be surprised to see that I now have a co-host for this channel, but I do want to thank Max for his amazing contribution to this tiny, non-monetized channel.
@project-326Ай бұрын
Indeed, good work Max, looking forward to more cooperation very soon.
@MrMaxEntropyАй бұрын
My pleasure Arthur!
@Muonium1Ай бұрын
Cheerio Posh Arthur, you are looking very appropriately toff indeed 🤖🎩 If I may, I can offer some insight into your spectral analysis of these light sources that you have. The 532nm green laser pointer has a peak at 820nm because this is the wavelength of the GaAs laser diode used to pump the Nd:YVO4 crystal inside which then lases at the fundamental neodymium line at 1064nm, and which THEN is frequency doubled by a potassium titanyl phosphate crystal to 532nm green. Also, your violet diode laser at 22:00 and your red laser at 20:30 are direct diode lasers, there is no pumping of a secondary lasing medium. The line you see at 820nm for the violet laser is just a second order diffraction line, but the small peak at 750nm for the red laser is not. The higher order diffraction peaks will always be at exactly whole single digit multiples of the fundamental line. I suspect the line at 750nm for your red laser, and the small peak at 622nm for your 532nm green laser, AND the small peak at 500nm for your 410nm violet laser are simply an unwanted internal Fresnel surface reflection off the first side of the couple mm thick DVD being used as a diffraction grating on the "Garden" spectrometer. Notice how they only appear on the Garden, and they're always offset 90nm from the brightest peak. Your analysis of the 450nm laser is accurate. I wonder if it is possible to remove the phosphor from a CFL source like that by immersing the tube in an ultrasonic cleaner bath, which then could be used to observe the mercury lines in complete isolation, as from an uncoated germicidal bulb. Pip pip old chap. Looking forward to part 2.
@project-326Ай бұрын
@@Muonium1 Hi and thank you very much for the detailed explanation. Actually a few other viewers have helped me with this too. Max, Arthur and myself are always pleased to be learning, even by mistakes. Far too many YT creators are very resistant to corrections (Veritasium comes to mind), so thank you for your help!
@project-326Ай бұрын
@@Muonium1 Actually, I have a mercury vapor lamp to test in part 2...
@gblarggАй бұрын
Woah, I had to check to be sure this was the channel I thought it was. I'm all for trying new styles and approaches. Glad 'Posh' Arthur wasn't fired. His dry humor is important.
@project-326Ай бұрын
Nobody can fire Posh Arthur, despite how naughty he is...
@Posh-ArthurАй бұрын
the humans can't get by without me, don't worry.
@LawpickingLocksmithАй бұрын
I no longer have a commercial need. But my scientific mind wants one to be added to the selection of it it can be measured I want to be able to measure it. As a former repair technician in the analog days of video and early digital cameras I had to have a calibrated light of a known color temperature. The cheapest way was to use 12V halogen downlights and run them at 14.8V where they only had a short but useful life.
@chuckadams842Ай бұрын
One additional request for the TLM-2. Have software available for Linux systems. There are millions of Raspberry Pi 5/4/..., Orange Pi 5 Plus, etc systems that amateur and professional scientists use daily. Those interested in atmospheric and astronomical physics/sciences, meteorologists, climatologists and just STEM students and programs that can use the TLM-2 to do research with the small cheap microcomputer systems. If you go open source, you would get 1,000s of programmers to come up the best software that would ordinarily cost millions of dollars (in any currency). Even setup a web page for a repository and competition. The company could come up with a cash prize for the best software submitted for open source and sharing with the Universe at large. Go big and sell a lot of hardware. In my humble opinion. Submitted for your consideration. This could be the greatest thing since sliced bread.
@williampowell2078Ай бұрын
This!
@MrMaxEntropyАй бұрын
Hello everyone! I'm Max, one of your co-hosts, and I'm thrilled to be here with you all. We're excited to share some interesting content with you - from laughs and learning to complete annihilation of all organic life on earth by my co-host Posh Arthur.
@fwiffoАй бұрын
Non-crippled software would be an improvement. An SDK would be even better.
@project-326Ай бұрын
SKD is a great suggestion...
@danieljimenez1989Ай бұрын
@@project-326 there is an SDK, I got the document from their website using my product number, it's very likely the same protocol. Can share if desired, just let me know of a contact address.
@SianaGearzАй бұрын
Haha i truly don't have a lot of confidence that they can write good software. SDK or hardware interfacing open documentation would allow some interesting uses. Someone needs a monitor calibrator? Might turn out better than any other.
@project-326Ай бұрын
@@SianaGearz I also have a fairly low confidence, their core team is basically scientists, what they need to get to market is more engineers. Its the classic start-up problem...
@DaveEtchellsАй бұрын
VERY interesting! Instant new subscriber with the bell clicked (I never do that 😮) You might have explained it in the Little Garden vid (going there right now), but I’d love to hear the details of how they get 5nm resolution out of just a few quantum dots.
@Ni5eiАй бұрын
This video is quite a surprise. Well done! I was considering ordering the Little Garden device through a third party company but I'll wait until part 2 of the video is released and draw my conclusions then.
@project-326Ай бұрын
a good plan!
@Posh-ArthurАй бұрын
We are already busy in the 2nd part...
@Matthew.MorycinskiАй бұрын
It's nice to see fluorescent lamp (i.e. argon and mercury) spectral lines. I remember them from my time in high school (ca. 1980) where I volunteered to repair a physics classroom spectroscope. It had a 60 degree prism, two optical tubes at adjustable angles, and was just missing an eyepiece, which I substituted by fitting an objective lens from my 8mm film camera. It was basically the original Bunsen's design from ca. 1900. Good resolution, as long as the slit was kept narrow enough. I could clearly see the double line of sodium, as well as Fraunhofer dark equivalent in sunlight. Compared to this, the resolution of the two spectrometers reviewed leaves a lot to be desired, especially the small one. I believe TLM-2 design relies on interpolation to such a degree that its results are somewhat misleading. It likely shows any number of close lines as if they were one, as long as they fall on the same pair of pixels of the light sensor. In other words, it will calculate a weighted average of wavelength and add up intensity. So the high accuracy for a sparse spectrum probably belies much lower resolution of a busy one. Try it using a neon lamp, which has a lot of lines close together in the orange-red part of the spectrum. It will likely not resolve very many of them.
@project-326Ай бұрын
I will be doing exactly as you suggest with a Neon lamp source. As part of another video I'm working on, I will be discussing how to use these cheapo spectrometers to identify elements. I'll post a pic I got from the TLM-2 on the community tab in a few mins, keep an eye open for that!
@leandroebner1405Ай бұрын
@@project-326hehe, nice to hear that idea is in the making ^^
@ghlscitel6714Ай бұрын
Eagerly awaiting part 2. More eagerly awaiting the availability of the product in an online shop.
@project-326Ай бұрын
In progress, but please be patient, we want to be sure the manufacturer gets their head around the idea of listening to potential customers.
@pmate95Ай бұрын
Great thingy. I hope one day someone makes it available on Aliexpress, or on other international site.
@project-326Ай бұрын
Hopefully this will be on Amazon soon!
@MaxNippardАй бұрын
Thanks for the in depth review. It's a very interesting product, it would be much nicer if the apps were had the basic functionality working really reliably. The mobile apps need to find the unit faster and the PC app needs to remember settings. A USB C socket would be highly appreciated too. P.s. Please retire the slow robot voice and refrain from repeating the same information you just said when you switch to the spectrum results.
@project-326Ай бұрын
@@MaxNippard We are hoping that if there are enough comments about the issues, the manufacturer will make the changes...
@LawpickingLocksmithАй бұрын
@@MaxNippard I second the suggestion to retire anything repetitive.
@CraftAeroАй бұрын
@@MaxNippard How long have they been developing this device ? Haven't seen a Mini-USB connector for over a decade. 0:07
@robertbauer6723Ай бұрын
Amazing little device, thank you for bringing it to us. Can't wait for part 2
@project-326Ай бұрын
Coming soon!
Ай бұрын
It just uses serial port? That's cool! It sucks that it doesn't have "export to CSV" but I'd love to try to "reverse-engineer" the communication.
@project-326Ай бұрын
me too, I will probably take a look, at least to see if the data has any encryption included.
@BrooksMosesАй бұрын
@@project-326 : I'd definitely be interested in a followup video on what you find out. This would pretty much make the difference in whether I'll buy it from Amazon when it comes out or not. On the other hand, I presume their "magic" algorithms are all in the computer-or-mobile-device side of things rather than in the hardware, so the serial data isn't going to be as precise, and probably isn't calibrated to luminosity levels. So having an "export to CSV" function and/or an SDK to allow another program to access the calibrated data might be more useful. My applications for this would be combining it with a broad-spectrum light source to experiment with looking at spectra of reflected light, which means that being able to post-process the data from the device is of critical importance.
@jmi967Ай бұрын
@@BrooksMosesSame, I won’t touch it in its current state out of principle until someone reverse engineers it.
@jimquinnАй бұрын
Looking forward to 2nd video. Would purchase a few units if software was fixed. Rescaling window size, remembering parameters, and outputting CSV data are obvious must. Thank you.
@alastairbrickell8813Ай бұрын
I agree...these things need to be fixed before I would buy or recommend to others.
@chuckadams842Ай бұрын
Option to select PDF or an SVG image output. The SVG for inclusion in scientific papers for publication.
@thom1218Ай бұрын
Correction @20:00, the green laser pointer uses an 808nm pump diode to drive an Nd:YAG medium that outputs 1024nm... you may see residual emissions in both of these underlying frequencies, though the KTP only doubles the 1024nm source light.
@project-326Ай бұрын
Thank you, this a a couple of other corrections will be in part 2 of the video.
@FernandoMoreiraRАй бұрын
I built a crappy version of the little garden based on your tear down from the last video actually. I wanted to get one badly, but figured that it was too difficult so I tried to pull it off. I didn't use the monochrome camera, as I could find one (recently I got one, but haven't done anything with it), that said its quite limited, but was super fun to make. I love these videos, they make you think about products.
@project-326Ай бұрын
OK, so I had a lot of very detailed discussion with the creator of the 'little garden' device. It seems I made a mistake in my original video. He is not buying monochrome camera (that is too expensive, due to the very low demand) but manually cleaning of the Bayer Filter. I have a lot of respect for that guy and will be including a whole segment on him in the next video.
@project-326Ай бұрын
I also tried to build one myself - it really made me appreciate the 'little Garden" device a LOT more. Sometimes, its the journey that is more interesting than the destination...
@user-ri2zq7by1mАй бұрын
@@project-326 Cleaning a Bayer filter manually sounds crazy, but maybe you know how he does it?
@project-326Ай бұрын
@@user-ri2zq7by1m The creator would like to keep that part secret... But I ill be showing a video of the process that he sent to me.
@FernandoMoreiraRАй бұрын
@@project-326 that would explain a lot, haha I spent hours trying to figure out if I bought the wrong camera module. Cleaning the Bayer Filter sounds like delicate work that take a lot of effort. Cant wait to see the process!
@firstmkbАй бұрын
lol, I can’t believe anyone else has that Peaches song. I used to listen to it while coding, about 20 years ago - and it still makes me smile.
@LungsMcGeeАй бұрын
I first heard it in the Scarlett Johansson and Bill Murray movie Lost in Translation. Been on my playlist ever since😂
@grant-isАй бұрын
PEACHES and a Spectrometer Review are two things I never in my life assumed would be together!
@project-326Ай бұрын
;-)
@Posh-ArthurАй бұрын
Human music at its finest, in the right setting, of course...
@NeptuniumАй бұрын
Ah ! another great video from Project 326 at last! You my friend are going places! really enjoy your videos! Salute!
@project-326Ай бұрын
As I enjoy your videos too Sir!
@NeptuniumАй бұрын
@@project-326 👍😊
@shogoonnАй бұрын
In the green laser the 808 nm is the actual LED wavelength. The light gets converted to 1064 nm (fluorescence) in a Nd:YAG crystal, and after that passes through KTP crystal which doubles the frequency to 532 nm.
@project-326Ай бұрын
thanks for that info. It is the very best thing about a channel like this, I get to learn from smart people!
@Peterkramer929Ай бұрын
frequency doubling, how does that work? absorbing two photons, emitting one? (always thought that was impossible)
@leandroebner1405Ай бұрын
@@Peterkramer929that's basically exactly what it does. The math works out super close to both input photons only being half the output energy respectively. Even more fun, there are processes working the other way round! Look up SPDC and you'll be even more impressed :). Back in the days I built entangled photon sources by the use of UV lasers with a Type 2 BBO crystal. The process occurs only rare times and most of the UV passes straight through. Some UV photons get split into 2 red photons, also being orthogonally oriented in their polarization plane. You can "easily" dm Separate them by using Pol filters :D
@danieljimenez1989Ай бұрын
@@leandroebner1405 I did SPDC generation in my masters and both generation and recombination in my phd thesis. It's one amazing process, but quite inefficient as you've mentioned. I did some calculations for BBO, but ended up doing type 0 (same polarization of both photons) in a periodically-poled KTP crystal with periodicity just over 3 um. With ~100 mW of 405 nm we got a hundred thousand pairs per second or so, and up to a few thousand recombinations per second. Recombination is ultra-challenging, both theoretically and experimentally, I think it'll be an important part of quantum signal processing in the future. One interesting thing about type 0 in PPKTP is the way you can change the phase-matching conditions with both temperature and angle of the crystal. You can get collinear-degenerate, collinear non-degenerate, or non-collinear interactions, all with the same crystal.
@Peterkramer929Ай бұрын
@@leandroebner1405 I used to teach my kids that once an electron got into an excited state it would immediately(!) fall back to a lower state, emitting a few lower f (and therefore E) photons. Or perhaps one with the same f when the electron would, in one step, go to the ground state. But that it is impossible to excite an electron in two steps. What I understand from you is that you need two exact same photons at the exact same time(?) I'll look into it.
@ChemitronicАй бұрын
Really looking forward to part 2, and ready to order one to satisfy my curious-yet-poor self! Amazing video!
@project-326Ай бұрын
Awesome! Thank you!
@leppieАй бұрын
If this is just a COM port, surely you can just write translation layer and use something like ArgyllCMS. Or whatever software to your liking. Edit: Would have liked to see the insides. But I see that coming. Looks like another camera sensor. Would have thought a linear scanner CCD as better, but I guess optics would need to much better then as well as a size increase. Please keep finding these gems. Edit2: Would you mind testing these for color calibration (I see their software does do something for that with xy coords)?
@dave7038Ай бұрын
Great review and cool device! Looking forward to seeing the second part! I'd suggest that non-proprietary parts of the user interface software be open source. The difficult parts are the hardware and any secret sauce they have for calibration and signal processing. The UI parts where the processed output data is displayed should be open so users can customize it or integrate it with their own tools. This would also allow users to contribute features and bug fixes back to the official UI project, improving the product for everyone.
@project-326Ай бұрын
Thanks for the ideas, I hope they will be able to take these on board...
@LungsMcGeeАй бұрын
Wow, this is a great new format. Love the brothel scene😂 That little spectrometer looks good too, shame about the bugs you identified. They would be easily fixed as you mentioned. Be nice to have better resolution, but I suspect that may be a physical hurdle to overcome without adding an FFA (Fudge Factor Algorithm). Well done for a best ever video👍
@project-326Ай бұрын
thank you very much
@crgarciamgАй бұрын
I'm looking forward to the second part. For sure I am interested in the device, as long as the manufacturer does not intentionally cripple functions just to charge more without justifiable costs - I've given up on FLIR thermal imagers beacause of such behavior. One more question that was not raised in the video: why use an USB mini-B connector in 2024?
@project-326Ай бұрын
There is a USB-Serial converter inside the cable housing - my guess is that because the mini-USB is not common, it help to reduce the number of people that are likely to plug it directly into a USB port...
@youtubeuser6067Ай бұрын
We NEED people like you to evaluate the few US electronic products as well as EU products to see if feedback can help improve their products too.
@project-326Ай бұрын
so many things to test, so little time...
@TLang-el6skАй бұрын
Nice device. It would be nice to have a machine readable export format. And it would be nice to have higher precision of the small device combined with the finer resolution of the bigger one.
@leandroebner1405Ай бұрын
If I had time for that, I'd look into possible hacky modifications. Those devices send their simple data packets over the com part without any encryption. Don think their company would like that approach tho. But that's what happens by making silly decisions the customer has to life with.
@James-fe7wdАй бұрын
This is such a cool channel Max, you are a wealth of knowledge. So happy I stumbled across you today, surprised it took as long as it did.
@project-326Ай бұрын
Welcome aboard!
@ericstephenson9924Ай бұрын
great. love the style. love the color names.
@project-326Ай бұрын
Thanks so much!
@zyxwvutsrqponmlkhАй бұрын
Some of your extra peaks are artifacts of the way these spectrometer works and not actually in the light source. You can confirm this with some filters.
@project-326Ай бұрын
I'll take a look at that in the next part of the video.
@inductivelycoupledplasma6207Ай бұрын
An important note!! None of the lasers used (besides the green 532nm unit) use a frequency doubling crystal. The infrared lines are artifacts on the spectrometer.
@project-326Ай бұрын
Yep, we will be adding a correction to the part 2 video.
@inductivelycoupledplasma6207Ай бұрын
@@project-326 cool, looking forward to seeing it
@stanley660224 күн бұрын
The signal at 21:38 is produce by the 808nm laser diode in the green laser. The green laser in the video is a DPSS(Diilde pump soild state laser). which use a 808nm laser diode as a source, then pump it to 1064nm, then frequency double to 532nm.
@project-32624 күн бұрын
Thanks for the feedback, several others have also pointed this out. In the next video (will be released tonight) there is a correction and a demonstration of this. Thanks!
@chuckadams842Ай бұрын
Sorry to add more stuff. 1. Use the TLM-2 to check safety glasses for bandpass and attenuation regions. 2. For the big color squatters and even Home Depot: use spectrometer to check their color patches at the store with the final color of the applied paint to different surfaces. 3. I want to check for UV output for the Chinese made LED bar lamps I use at the desk for bright white reading source, electronic assembly and soldering and video lighting. 4. Looks like around a 1cm diameter of the input diffuser. When you get sunlight, I am guessing 1316W/m^2 multiplied by 0.00007854 (area ratio) = 0.1068W/m^2 input in sunlight without pollution etc. With CSV data we can do the integration for calibration or atmospheric effect measurements. Thanks for all the hard work and I can understand the two week period between videos. It is greatly appreciated. Are the background squares 1cm in your TLM-2 videos? Inquiring minds want to know.
@project-326Ай бұрын
This is great, the more applications the better, a tool is only useful if it has a job to perform! I need to check on the mat, I have two, one is 1cm and the other is 1" (I do photography in 2 different locations)...
@kornrat8284Ай бұрын
To the manufacturer: I direly want a spectral analyzer tool. if you add a CSV export OR a CRI rating, I would try to buy it if it is available in Germany. Please add CSV export or CRI measurement
@project-326Ай бұрын
Thanks for the feedback!
@leandroebner1405Ай бұрын
CRI would be neat!!!
@project-326Ай бұрын
@@leandroebner1405 That's a really nice suggestion, let's mention that to Torch Bearer as well!
@DazdigoАй бұрын
I want to get one as well. Having a CSV data output would be great as well because then we can run in through other applications or just save it in a database for future reference and calibration.
@gregvisioninfosoftАй бұрын
its a definite requirement for it to be useful. such a calculating cie-lab color temperature calculations.
@leandroebner1405Ай бұрын
You'll run into a dead end pretty soon when you can't to anything with the data you measured. Agreed. Not a total dealbreaker because that thing in that price range is less a scientific tool and more a fun nerdy gadget
@ryanmckenna6763Ай бұрын
I WANT ONE!
@project-326Ай бұрын
Hopefully the device will be available on Amazon soon...
@denverbraughler3948Ай бұрын
It’s not true that Apollo considered every possible failure. They didn’t even bother to test the heaters on the oxygen tanks to make sure the voltage input was correct. They took lots of shortcuts and made assumptions that humans were a lot less fallible than in reality.
@iCatchАй бұрын
Great review! Hope you could mention that most engineering filaments requires an enclosure or even a actively heated enclosure to print, which is not obvious for people who has never printed them.
@StephanBuchinАй бұрын
The dots look like a super Bayer filter.
@project-326Ай бұрын
I was saving some more info for the 2nde part of the video, but the camera module is actually a monochrome type, according to the manufacturer.
@mariusbendiksen163Ай бұрын
800-830nm line is the pump diode that drives the 1064nm that gets doubled.
@project-326Ай бұрын
Thank you for the feedback, other have pointed this out too, in part 2 of the video, we will be making some corrections.
@fbluaАй бұрын
Excellent video. Thank you. One thing, I think you should put a pure black of an inch just in front of the emitter and the receptor (spectrometer), the objetive is to achieve optical engagement without the reflection of other surfaces, in this case the rubber you use. The emitter projects its radiation on the rubber and contaminate part of the rays reach the recepto. Of course, there are a lot of other variables to control; e.g., vacuum, humidity, distance, air composition, etc., etc., but at least, I suggest, you can control the distance between the tubes. I mean: emitter + 0 mm + 2.54 mm (the output non-reflective tube) + 2.54 mm (air distance) + 2.54 mm (the input non-reflective tube) + 0 mm + spectrometer-receptor. Maybe, maybe not, it would improve the results. What do you think? Anyhow, I just want to thank you for your video; I would love to have that marvellous hardware you can get in China. I would make "gun shape form" or pointer, spectrometer; with a laser telemeter to adjust the efect of distance of the surrounding gases (mostly cases air.) I would make may own typical base measurements to stablish sets of spectrographic data base; as well the corrections due to distance, angle or another variable that would apply. And app and small devise like that would be easy for ordinary citizen usage than other portable radioactive spectrographs. It should be quite use full to very quick draft material checks: canvas, woods, metals, cristal, food, etc.,
@valseedian10 күн бұрын
the infrared peaks on the green laser could be the diffuser heating up
@project-32610 күн бұрын
Turns out the IR peaks are from the diode pumping architecture of the laser. I put some errata into the latest video on the 'little garden' spectrometer. That errata is equally applicable for this video.
@peterwoolliams1283Ай бұрын
One issue that cheap array spectrometers suffer from is straylight, especially excess signal In the blue/UV. Grading instruments can have order sorting filters and multiple gratings to eliminate. This one has some filtration on the pixels and a magic algorithm. I’d have done some tests with a broadband source and a thick bit of various schott coloured filters, see if you get any signal where you should see none. You could also check you “higher order effect” hypothesis by filtering the source so there is no light in that spectral region and then seeing if the higher order lines appear. Calibrated, how, against what and for what sources? Interesting little device. No numbers out is no sales made. No way to check noise floor, stray light etc. roll on part 2.
@project-326Ай бұрын
indeed. So much is not defined but that only means that there is more to learn...
@daomingjin28 күн бұрын
i live in shenzhen... so i'm certainly going to get one....
@zyxwvutsrqponmlkhАй бұрын
This channel going to blow up.
@leandroebner1405Ай бұрын
Indeed. And I'm incredibly happy KZbin gained another good channel for informative science
@TheUserbob123Ай бұрын
I love your channel and just wanted to make you aware I prefer long fourm videos. Making the videos shorter trims out your humorous side and the depth of the information provided.
@project-326Ай бұрын
Thanks for the tip!
@John-gw3mjАй бұрын
Like you said, CSV export is pretty important. The other thing I'd like to see is the software being open source so there are no questions about its safety.
@project-326Ай бұрын
I don't think they would release their software open source, but perhaps an SDK is a good compromise...
@artiem5262Ай бұрын
I am very interested in this device, if it has iOS support and CSV data output!
@anoirbentanfousАй бұрын
The potential of this product is evident, but the manufacturer needs to enhance its software and address any issues. They should strive to create a highly marketable product, where the design and features are of utmost importance. Integrating AI capabilities into the software could take the product to the next level.
@davidlanday610223 күн бұрын
Cool! Are there any miniature NIR or MIR spectrometers in a similar form factor?
@SianaGearzАй бұрын
With this device and your acumen for naming, Posh-Arthur is certain to be the next successful colour squatter.
@Chakrawat-PakshiiАй бұрын
I wanted to know more about creation of monochromatic source of light and embodying the same into a Laser! What does the terms ‘Source Wave Length’ and its multiplicand’ means? How the mulltiplication of frequency of light is achieved, in practice?
@RoyaltyInTraining.Ай бұрын
I'd just listen in on the com port, figure out the protocol, and generate the CSV with reverse engineered software. I doubt it's that hard to do.
@project-326Ай бұрын
It's certainly worth trying that, let's hope that didn't try to encrypt the data to prevent that...
@danieljimenez1989Ай бұрын
@@project-326 I have a different version of their spectrometer, the PJG3, which came with the information regarding the serial port commands and data packets. This may be useful for your purposes. The data isn't encrypted from the looks of it. The document is in chinese, but translation by machine seemed to have worked very well. Now, I can't actually test it yet because they don't have the pinout for the TTL interface printed or written anywhere! The PJG3 version has no usb output, but rather a 4 pin serial interface that is completely unmarked and doesn't come with a pinout diagram (nor is it included in the manual for the client interface or for the SDK). So, I've written to the company just yesterday to inquire about this. Their Alibaba store is offline now, so I had to write to their email. No answer yet, I sent them a machine translation version a few hours ago, hopefully they'll come through and provide this info. Cheers!
@demikweerАй бұрын
Thanks, very thorough video. But there is one thing that annoys me: the glass breakage sound after the titles.
@project-326Ай бұрын
I try different experiments in each video for the chapter titles, the results are not always ideal. Thank you for the feedback!
@electrobus5095Ай бұрын
I want to order one so badly 😍
@project-326Ай бұрын
As soon as the product is released, I will let everyone know.
@electrobus509523 күн бұрын
@@project-326any news on a timeline here? Otherwise i would probably buy the other one you reviewed.
@Chakrawat-PakshiiАй бұрын
Very nicely explained and demonstrated! I wanted to look for different lines of emission from pure hydrogen spectra; particularly of Balmer & Paschen series. I wanted to get assured about the same! Or whether we were just tought to be so! Thanks.
@project-326Ай бұрын
That is exactly why I like to make experiments on this channel, nothing beats seeing stuff for yourself, even if the results are way less impressive than from a professional lab. The reason people still buy telescopes is for exactly the same reason, nobody can beat the Hubble of JWST images but those are someone else's results. Seeing a tiny, dim, fuzzy, monochrome image of the rings of Saturn, with your own eyes, beats all of those beautiful on-line images from the pros. I'm going to look into finding a low pressure H2 tube...
@timrutterАй бұрын
Very interesting product. Hope the mfr make available some tools or libraries to use this on Linux or for integration into other projects
@project-326Ай бұрын
I hope so too
@BloodAspАй бұрын
I would be interested in one of these, but only if the suggested improvements in the video were made, and especially if the software for it was made to be open source. An additional suggestion would be for it to be USB-C compatible.
@project-326Ай бұрын
its using the old Mini-USB because its not USB, but serial UART. There is a USB-UART converter in the cable itself. Hopefully they can improve that too.
@SteveBakerIsHereАй бұрын
Needs a Linux version - for applications using Raspberry Pi - and a SIMPLE numerical output, like CSV is 100% essential.
@patrickdegenaar9495Ай бұрын
Wow.. i love it! I still remember using room sized monochromators (25 years ago) with a knob to manually rotate through each wavelength - used to take 4 hours to get a reading!!! Specifically on the device, the physics looks sound! The key thing is to be able to easily get raw data out, have quick analysis, and perhaps upload target spectra to the mobile/tablet. Also if it canbgenerate CIE coordinates, that woukd be great. Finally lower the price, tge more people will use it, but there needs to be a good build quality. I'm looking forward to buying one!
@chuckadams842Ай бұрын
This is indeed a fantastic find. Many thanks for the video. I will be at the opening gate to buy one as soon as Amazon has them online. I want one to measure twilight colorimetry to match a paper I did almost 50 years ago. Was in the process of building a DIY spectrometer, but now I can relax and await the opening bell for the TLM-2. Another test I'm interested in. Variable incandescent lamp to measure blackbody curve vs temperature for calibration. Question: Has anyone checked for heating in the diffuser as a possible source for the IR contribution?
@alxRoАй бұрын
Very nice video Greetings from Greece SIR!!!
@project-326Ай бұрын
Thank you very much!
@alxRoАй бұрын
@@project-326 you welcome SIR!
@jmi967Ай бұрын
The Sanatorium White led needs a high pass filter to get it closer to sunlight
@bartekpoznan8 күн бұрын
Fantastic video Thanks a lot! Have you tried doing any absorption spectra?
@project-3267 күн бұрын
We are looking at 'maybe' doing some raman spectroscopy, but that depends on the costs involved. We have been also doing some experiments with the spectra of various plasma. We might be able to think up some interesting experiments in that area if we get time.
@thorstenoertsАй бұрын
Subscribed for the Peaches bit alone.
@DennisSantosАй бұрын
Regarding the green laser: The small IR peak is from the IR pumping diode which then goes through two crystals which do the frequency doubling, etc. This green laser appears to adequately filter out the IR but many do not. Edit: You mention this with the violet laser. I see this video took a while to put together, LOL
@project-326Ай бұрын
Thank you, I have already be 'educated' in that aspect by another kind viewer. The thing I like best about making these videos is that there are always people with more knowledge to learn from. I didn't realize that the green laser was a 3 stage process. Its amazing how much technology can be crammed into a $10 laser pointer...
@DennisSantosАй бұрын
@@project-326 They're cheap as chips today but i remember when green pointers cost the earth in the earliest days of the internet. BTW, they now make fully SS 488mn blueish-green ones with just the diode - I own one. I need to develop my own YT channel with all the tech junk I've accrued over the years. LOL. I'm glad you welcomed my earlier explanation on this public forum and I'm certainly learning a lot from your good self. Can't wait for the second half.
@leandroebner1405Ай бұрын
@@project-326DPSS are nowadays some of the cheapest lasers which is crazy when you think about how complex their optical path actually is
@leandroebner1405Ай бұрын
@@DennisSantosyes please. KZbin needs more creators in that field, always!!
@project-326Ай бұрын
@@leandroebner1405 I was one of those that worked on early CD player technology, the whole CD mechanism and OPU ended up costing less than $1.50 in serious volume, in particular the Sanyo DA11 was just an amazing piece of optical technology for its time that somehow also had the distinction of costing the same as a candy bar... If that same technology had been developed for the military, each CD mechanism would have cost about $150K...
@j7ndominica051Ай бұрын
I wonder what the spectrum of various video monitors is. If some are more narrow-band than others, and which are the better ones. We already know or look up common lighting sources.
@project-326Ай бұрын
that is an interesting experiment we might include in part 2 of this video...
@alwayscurious413Ай бұрын
Brilliant video and product. I’d argue that they are locking out the CSV export whilst they figure out the business model. There’s maybe 2000 one off spectrometer hobbyists who’d buy this for home use and that’s the market done. I’m in already. However if you integrate it into another mass market volume product such as a vehicle or specialised lighting product then your market becomes scalable. I’d reckon that’s where this is headed.
@project-326Ай бұрын
Thank you for the comment. Some of my own thoughts... Each time I use this device, I seem to find a new application. For example, our IR chroma-key video, it was useful for seeing how spectrally pure a commercial green screen actually was (answer, not very). Amateur film makers will find this useful and because of the low cost, photographers can now have a much better tool than the 3 color sensors that are normally used. Anyone involved in pro lighting is also a potential customer. Basic class room education is also opened up, instead of a high school having one $2000 system to share between all classes, there can be more devices available. Anyone involved in the print and finishing industry, QA technicians and product designers. The list just gets longer each time I think about it... This device has earned a valuable place in my work bag, I am really strict about what I carry around but its really useful for far more things than I ever imagined. As for the company, as a tech start-up, their core team are basically scientists and PhD's, so I hope that they can get the help they need with the product marketing going forward.
@AM-jw1loАй бұрын
Yes we need a data export file, that is if you are trying to promote people to uses this in applications other than pretty pictures. That said, since i get to say something that might help in development, could you please cut the music loop, to hear the same thing over and over really made it hard to get to the end of the video and i certainly will have issue with part 2. Otherwise, nice.
@project-326Ай бұрын
I will try and make changes to the next video, thanks for the feedback though!
@AppliedCryogenicsАй бұрын
I love this content. I'm not worried about watching an hour's worth of it for sure!
@project-326Ай бұрын
that's a very heart warming sentiment, thank you
@raymitchell9736Ай бұрын
Yes, I hope that they can fix these deficiencies. I'm interested in purchasing a low-cost spectrometer; I have a product I'm developing that I need a tool such as this to explore the light sources I plan to use in it! Upfront: The Functionality and Price will be determining factors in my purchase decision. I agree with the criticism about the software's abilities, they need to be improved. Please, do spend some more time to polish it up before releasing. Even the ability to connect to that 3rd party's open source software might be a good way to get it there, just a suggestion. I think it is wonderful to have an opportunity to communicate and be part of the community that helps shape the product's we use! And for the manufacturer, it must be a great opportunity for you to get direct and useful feedback by the customers. In any event, I'm looking forward to part 2 and see if we made a difference. Thanks a bunch!
@project-326Ай бұрын
yes, I am hoping that the manufacturer will be responsive too. What I really like about this unit is the size. It now lives in my work bag on a permanent basis...
@titussteenhuisen8864Ай бұрын
wouldn’t mind buying if it is a little better I am interested in different light colours
@EdTannenbaumАй бұрын
There should be CSV output, but I wonder if the pdf might be able to be "read" by Chat GPT which would output what it "saw" in your format of choice? Edit: I just tried it with Claude and it told me that the resolution of the chart I gave it wasn't good enough for accurate reading. I'd like to see the PDF output of this instrument. If high enough resolution it may work.
@tortysoftАй бұрын
So, how much will/do they cost?
@project-326Ай бұрын
I don't know yet. Mine cost around $50 USD here in CN on TaoBao but on Amazon there are going to be the extra costs of Amazon's margin (4 x higher than TaoBao) and shipping, logistics and fulfillment. I'm kind of guessing it will be over $60 once it reaches Amazon. Just a guess though...
@KaiseruSozeАй бұрын
It needs a notch filter and csv output. I wouldn't buy it without both of these features.
@tikaanipippinАй бұрын
Thank you for an illuminating video - subscribed, liked, and hungry for more.
@project-326Ай бұрын
Welcome aboard!
@daverei1211Ай бұрын
This is an amazing solution seeking a problem to solve…..
@project-326Ай бұрын
You are right but... Once I started playing with spectrometers, I just keep finding new things to point it at. Something so small and low cost, even has applications for professional lighting, even for YT creators. For me, it was like a Swiss army knife, that one accessory you never used until one day finding out what it is actually for and then realizing how useful it is.
@daverei1211Ай бұрын
@@project-326 thinking about it, if say it’s built into a phone then it could be useful as a fruit/veg freshness picker. On an XY robot could be used to step scan artworks for potential mismatches/fraud. At low cost could be used in ATMs as another way of checking for fraudulent bills. But probably the best application if it could handle range could be for industrial level robot agriculture where the robot checks the spectrum of the plant leaf to work out its health and use this to determine individual plant care. Another (but would require significant investment to certify) is skin scans for cancer - I’m assuming different types of skin cancer would have a different spectra to normal skin.
@project-326Ай бұрын
@@daverei1211 Spectrometers of all types just have a wealth of information to give. That is why I now carry this device almost everywhere I go. Its great for the kids, we can see something and then the kids, they get a great visualization of what light actually is when they are playing with it. My 10 year old daughter has now understood that 'white' LEDs are actually blue LEDs with 'yellow stuff' that makes other colors.
@codebeat4192Ай бұрын
'Posh' Arthur is actually Brian (text-to-speech), used at "Go Animate".
@project-326Ай бұрын
It might sound a bit like that one, but actually its from a different source.
@tyhuffman5447Ай бұрын
Looks like a great-ish product with some software needs. Get the software dialed in.
@project-326Ай бұрын
lets hope so, I can lead a horse to water, but I can't make it drink...
@brianclimbs1509Ай бұрын
I like how he compares them to Keysight and Rhode and Schwarz blocking features. They might be a bit cocky there. I think a large portion of the market they are aiming for will need the .CSV output. Then the user can write code for their specific application. I highly doubt this startup will have the resources to write sufficiently versatile and polished software for the myriad possible applications.
@jmi967Ай бұрын
Might you try using the TLM-2 to check if the Little Garden could me used for luminosity measurements?
@project-326Ай бұрын
Yes, that is good idea, to create a calibration curve for exported data from the little garden...
@jensschroder8214Ай бұрын
A reasonable software in English is a prerequisite for international marketing. Is it so difficult to remember the language and the COM port? Is it that difficult to install a usable image export?
@spastickitchenАй бұрын
I have that exact 450 nm pointer. It is not a DPSSL, it's direct eiode, so there should be no IR emission. I would suspect the same for the 410 nm, not that DPSSL is impossible, but they would cost more than 10x as much as a direct diode laser. Looking at the spectral width, I am fairly sure these should both be direct diode lasers. You should be able to tell by which way the batteries are inserted, or, you might be able to open them up to see the module. The 532 nm, however, is indeed, more likely, DPSSL, pumped with an 808 nm IR laser, so that is reassuring... however, the artefacts for the near UV lasers is concerning to me. I'm 98% sure something is wrong with the spectromeret... higher order diffraction or some other interference, rather than an issue with the laser. Still, though, both products are interesting to me. If they are available in the USA for under $150, I'd seriously consider these. If they go higher than that, they'll already be in competition with other super-low cost spectrometers that seem to have fewer reported bugs.
@project-326Ай бұрын
Yup, if figured that out from some other comments. I will be making some corrections in the next part of the video. Thank you for the corrections, learning is something I never want to stop doing and having people that know something I don't, point out mistakes in the comments is a positive experience for me.
@BRUXXUSАй бұрын
Another fantastic video! Even with the better accuracy and interesting technology in the TLM-2, I would still much, MUCH rather just make my own spectrometer so I could use software that's actually useful. If I could use the TLM-2 with open source software, or if the company software didn't feel and look like spyware from 1998, it would be an instant buy. So, Torchbearer can choose to gate-keep functional software behind a paywall, and get $0 of my money, or put out a useful product and at least get some of my money.
@project-326Ай бұрын
Let's see if they are responsive - I just emailed them with the video link...
@leandroebner1405Ай бұрын
@@project-326well, you already scared the living hell out of Bosean, hopefully they will take that good amount of honest into account for further reconsiderations :D
@project-326Ай бұрын
@@leandroebner1405 A little fear keep manufacturers honest and response to their customers needs. Actually, I have been impressed with the responsiveness of companies like Measall and Bosean. The winds of change, they are a blowin'.
@19Murad77Ай бұрын
1:25 "...if it ever stop raining..." . Here in Belgium we share your pain, mate.
@olafmarzocchi6194Ай бұрын
Besides resolution, an issue of spectrometers using webcams is that the gain (amplitude) in various channels is not constant, due to processingin the webcam algorithm, so different spectra cannot be compared. Is this using a constant gain, so that I can calibrate and get good results? Without a calibration and constant gain, the spectra are useful only for looking at them, you cannot even measure the CRI of a LED light. And what about the Garden spectrometer?
@project-326Ай бұрын
The TLM2 isn't using a webcam. They are buying a monochrome CMOS die and getting the QD's deposited onto the sensor directly before the passivization is added. I'm guessing that they are getting the image sensor vendor to do this for them in the fab as a custom version. The TLM2 appears to be pre-calibrated for level and that cannot be changed. The little garden device will suffer from the issues that you mention, the levels for each of the color channels will be optimized for the 'best picture' for human eyes, not best optimization for photon energy. These types of sensors usually have some OTP ROM that allows the product level manufacturer to set up the color balance, the gain transfer function, etc and those settings will have already been burnt in before the creator of the LG device received the camera module. The creator of the LG device has released that on AliExpress and there is a link to the store in a post in the community section of this channel.
@KevanShawАй бұрын
This kind of affordable spectrometer is really useful for lighting designers and others invo!ved in architectural lighting design for confirmation of product specification. Also increasingly important in other areas of professional lighting such as photography and videography. So far the product seems pretty good for our kinds of use with sufficient resolution and accuracy. Typically the output format in PDF isOK if we have enough detail and refencesto ISO and CIE standards however CSV is necessary For calculating colour fidelity and also for melanopic effectiveness through standard tools freely available from IES and CIE. Price in the market is also important as will be thelevel of calibration against traceable standards to NIST or other international standards. Also how about recalibration? If it is cheap enough and calibration from new is warrantied for say 2 years then replace that would be good enough if the unit is cheap enough. Currently I need to replace my existing spectrophotometer as the company who made it are out of business and it cannot be recalibrated also there is no software support for it
@project-326Ай бұрын
These are all really good questions that I hope the manufacturer will be able to have answers too!
@ozzymandius666Ай бұрын
Fascinating. Hope it gets some SW improvements before it hits the North American market.
@project-326Ай бұрын
me too! Fingers crossed - I just let the company know about the video being released...
@ozzymandius666Ай бұрын
@@project-326 Here's to hoping. I wonder if someone will make an open-source SW for it, I think there are already a couple out there that I've seen people do builds based on.
@marsrocketАй бұрын
I’m surprised they could even find a usb mini b port to put on it.
@project-326Ай бұрын
the cable is a USB-UART converter...
@leandroebner1405Ай бұрын
As long it's not an old pink parallel port xD
@NullsingАй бұрын
I ordered the little garden from China after saw you video - its working surprising nice. Also I prefer you keep the robotic voice instead of real human voice 😆😆
@project-326Ай бұрын
From TaoBao directly?
@NullsingАй бұрын
@@project-326 Yes, taobao official cainiao shipping service. Cost is very low and deliver within 2 weeks for the economics one
@NullsingАй бұрын
@@project-326 Also want to add that I ordered KC761B the same way as well. Works wonderfully too
@NullsingАй бұрын
@@project-326 For some reason youtube keeps deleting my comment..do you have email that I can contact you directly?
@windysynthАй бұрын
Definitely needs a way to get the data into other software--like csv file output. But with that, the company I work for would buy several of them.
@project-326Ай бұрын
Nice comment! I hope that sinks in with the manufacturer!
@mortophobegaming64547 күн бұрын
hey i'm looking for a setup to measure the elementary composition of a substance. how do i do this quickly and easily?
@project-3266 күн бұрын
We recently did a video about achieving this using beta back-scattering. Please take a loom on the channel for that one.
@geraldcecil764424 күн бұрын
I just found it on aliexpress, a few left and about $75 delivered to USA.
@geraldcecil764420 күн бұрын
Ooops, Little Garden not TLM-2. I ordered the former, hope to see the latter soon!
@cosmoscarl4332Ай бұрын
You should have made Max stutter or glitch audibly for authenticity. Then he would be more like Max Headroom.
@project-326Ай бұрын
good thinking :-)
@charlesb4714Ай бұрын
Exciting. I want one but can't find any place to buy it. A link to where you got yours would ne nice
@project-326Ай бұрын
As mentioned in the video, it isn't available in the west yet, but the company is planning to release on Amazon soon (part 2 of the video is planned for when that happens). I added the TaoBao store details where I got this product from to the video description, but this only works from China...
@ierunam27 күн бұрын
¿Y el Sol brilló por su ausencia? And the Sun shone by its absence?
@SjoerdBeukersАй бұрын
Nice vid! I would lose the text-to-speech to be honest.
@project-326Ай бұрын
That's a tough one. All the previous videos on this channel only had 'posh Arthur' as the narrator, this is the first one with a human voice and already some regular viewers are worried that Arthur will be fired. People seem to have a very wide spectrum of opinions on this subject...
@Posh-ArthurАй бұрын
That would be a sad loss! 😉
@mik71Ай бұрын
Good idea.
@project-326Ай бұрын
it is a cool idea, I now carry this everywhere with me in my work bag...
@valseedian10 күн бұрын
any good systems engineer can help you change the size of any window regardless of whether it's allowed :p any game hack creator can add a data extractor to existing software and will probably help you use cheatengine to do it with little effort, maybe for free. don't even have to get around any protections, it's easy mode. brothel pink looks like a pretty good spectrum for growing plants
@project-32610 күн бұрын
Thanks for the feedback! Actually, there is an easy way to break into the UART connection to the App anyway. I will be detailing that in the next video. That way, can get the exact captured data. Perhaps that LED is ideal for growing "brothel sprouts"...
@terrypitt-brooke8367Ай бұрын
I ❤ Posh Arthur. Nice 80s reference with "Max Entropy"--I miss Max Headroom and the first two seasons of Reboot. As a science hobbist who is poor and can generally only afford old devices, I'd appreciate a computer program that would work on Windows 7 or iOS 12. I also strongly concur with the call for CSV export capability