A Special Way to Sharpen Your Ax as Sharp as a Razor! Sharp Razor

Hello everyone! You are watching video "A Special Way to Sharpen Your Ax as Sharp as a Razor! Sharp Razor"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creationholic
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diyprojects #recyclediy #axsharpening #razorsharp

[@Usefulcreativity-ek9wh]

“Great video! The detailed explanation on how to properly sharpen an axe was incredibly insightful. I especially appreciated the emphasis on safety and the step-by-step guidance. The key takeaway for me is the importance of regular maintenance to ensure tools perform at their best and to prevent accidents. Thanks for sharing such valuable tips

[@creationholic101]

Thank you! Cheers!

[@dickienightingale]

Seems like a lot of effort just to put an edge on it ,just a few rubs on either side with the grinder works just fine👍

[@TipsMaster-le2dn]

You are truly an enthusiastic and observant audience member. You have discovered that he is a very caring person, always ready to share all his experiences in life and work.

[@Creative.Inventor]

I Am Inspired By Your Creativity, I Wish You Rapid Development, Thank You For This Video, It Is WondЯ надихаюсь великими досягненнями інших людей erful😏👍👍👍

[@creationholic101]

Thank you for watching

[@DIYTechTrends]

Mega like! Thank for sharing @@

[@creationholic101]

Thank you! Cheers!

[@user-yv2fx4ut9z]

خیلی عالی ممنون که با حوصله یاد میدین❤❤❤

[@CreationNOY80]

Another great idea, thank you!❤

[@creationholic101]

Glad you like them!

[@user-hz1rk5wz3d]

初夏さん，一月遅れのHappy Birthday🎉👏😄 久しぶりに初夏さんのギターと歌声を聞いて嬉しかったです。 コロナ前に大阪の堺市でライブが有りましたね。知らなかったので生で拝見できませんでした。それと大阪の品の無さがお恥ずかしいです。大阪を代表してお詫びいたします。🙇‍♂ ここ５年ほどで声がすっごくキレイになった気がするんですが，そう思うのは私だけでしょうか。 新生，大久保初夏Blues Project。嬉しい便りです。今までの楽曲も保存して拝見しております。 一人配信も良いものですね。PowerfulもBluezyなのも素敵です。 これからもLadies 3ピースバンドで楽しませてください。また大阪でのLIVEをお待ちしています。👋😄

[@Creative114_]

❤❤❤

[@creationholic101]

ありがとうございます。私も大阪に行ったことがあります。美しくて活気のある街です。

[@edsonquintilianojunior5064]

Great job. Edson, from Brazil.

[@creationholic101]

Thank you very much!

[@peterandersen1963]

I very seen 2 people (1 was me) slice their finger, very seriously, cutting kindling with a super sharp axe. Happened almost instantly. Never ever have I sharpened like that again. Been burning wood for approximately 45 years.

[@johnrhodes3350]

The trick is to keep ones fingers out of the way. See how 'Ray Mears' teaches to chop kindling and logs with a hatchet, camp axe, small forest axe

[@creationholic101]

Thank you for sharing your feedback. Have a good day!

[@TipsMaster-le2dn]

I always follow your channel and every video you show me your amazingly skilled hands, from good and creative ideas, your videos are always understandable and captivating.

[@creationholic101]

I am very happy to read your comment. Have a good day!

[@mordi2537]

Get a belt sander 120 and 400 grit belts. 3 minutes of work max

[@creationholic101]

Thanks for sharing!

[@denverstewart8301]

WOW, I don't know where to start. That is a hatchet my good man! Any cutting edges should be sharpened on a static machine like a bench grinder or a linisher at a push. Finally, have you ever tried using a razor to cut down a tree? I did, I started in 1997, still working on it now, 2 billion razors used so far! 😂

[@creationholic101]

Thank you for watching

[@diyinventor_]

nice ideas.. My next video will be on ax sharpening

[@creationholic101]

Thank you! Cheers!

[@OdinLothbrok]

45 seconds with a flat bastard file will get better results.

[@creationholic101]

Thanks for sharing!

[@CreativePassion88]

You did very well dear friend.

[@creationholic101]

Thank you! Cheers!

[@DavidWade-fm3pb]

Never seen an old timer use anything but a file. People now days trying to show how to do things is bullshit.

[@jeffcornelison888]

Then make a video and show us how it's properly done.

[@OdinLothbrok]

​@@jeffcornelison888why do you need a video to use a file? It's a common sense tool.

[@jeffcornelison888]

@OdinLothbrok Apparently you did not understand my comment. I get it's a common sense tool. What I don't get is why would someone like yourself get on here and bust somebody's balls about how they're doing it when you're not making a video yourself showing how to do it.

[@DavidWade-fm3pb]

@jeffcornelison888 Th comment wasn't personal but I do see tons of videos people do who don't know have a clue about what they are doing. You did a good job, just not the old way I am old and find it difficult to change. I apologize sir.

[@creationholic101]

It looks complicated at first, but once you've created the tool it will be very easy and fast, especially it has real effects.

[@douglaspearce496]

A sharp ax dulls very quickly, I know by experience.. there is only one reason to have a razor sharp ax is to cut off arms, legs, head.. And that will still cause your ax to dull very rapidly.

[@creationholic101]

With this tool, I think sharpening the ax will be very simple for you, it won't take you even 1 minute.

[@sraviravi2937]

Very intelygent idia 👍good job 👍

[@creationholic101]

Thank you! Cheers!

[@Alotipsalo]

Thanks for sharing, great idea

[@creationholic101]

Thanks for watching!

[@frct468]

Brasil!!!!

[@joeholtz5395]

The only time you'd do this to an ax is if you were strictly using it as a weapon. Try chopping wood with this edge and you'll be redoing it within a few hits. The edge is too slim.

[@JugglesGrenades]

That's the reason I did this to my tomahawk...... I keep it in my car in case someone wants to carjack me. It's my "disarming" tool.

[@creationholic101]

The heat is not as thin as you think

[@MilanCelko]

​@@JugglesGrenades33t

[@mustafakarakurt1466]

MERCI SUPER TEKNIK

[@creationholic101]

Thank you! Cheers!

[@APJEWELLERY988]

First comment love from India ❤️

[@glenngrabow7816]

Second love from Germany

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@DIYTechTrends]

@@glenngrabow7816 Wow! nice

[@EikralVally]

what is the size of the bolt and nuts

[@creationholic101]

nut bolt 10mm x 80mm

[@user-tu6tz7bq6n]

درود..واقعاعالی وزیباوآموزنده بود.ممنونم ازشمادوست عزیز..ایران..شیراز🎉🎉🎉

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@Creative114_]

it was great idea ❤

[@creationholic101]

Glad you think so!

[@andyt1573]

Really

[@creationholic101]

Thank you for watching

[@MikeGervasi]

Blade looked sharp at the edges and thick and dull in the center.

[@bertosdvizela3205]

Caldas de Vizela - Portugal

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@wt2179]

やるじゃん。すごい実用的。

[@creationholic101]

Hello! I am glad you like this ideas. Wishing you all good things!

[@CraftivityZone]

It's great that I discovered your channel

[@luizurol8598]

Para que serviu a marcação com a caneta? Ele não respeitou os limites da marcação!

[@TipsDIY8989]

you really did very well

[@creationholic101]

Thank you! Cheers!

[@TipsDIY8989]

@@creationholic101 Please continue to make more quality videos

[@johbob5l]

Brilliant ! Made the tool in less than 10 minutes and sharpened 2 axes - great results !

[@OdinLothbrok]

Just get a flat file and do it in 45-60 seconds.

[@creationholic101]

Glad you like them!

[@DIYTrends88]

the video is so helpful

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@mikealchin525]

If you split a lot of wood you want a dull ax.

[@rubenolivares2680]

Si no moja con agua el hacha se corre el riesgo de quemar el filo ojo.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@user-kz3mn6ef8u]

hi it's lovely but why old dis

[@creationholic101]

Sorry, I didn’t quite catch that. Can you repeat the question for me please?

[@MrBillmechanic]

brilliant!

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@MoffatCountyCowboy]

I always use a file. And never shaken an axe at that angle it'll be full in two licks on that stick

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@jantonio0099]

no entiendo el objetivo de pintar el filo de la hacha con color si a la primera pasada con el pulidor se borra I don't understand the point of painting the edge of the ax with color if the first pass with the polisher erases it.

[@creationholic101]

it helps me clearly identify the point that needs to be sharpened

[@timothyroche6445]

THERE IS A BETTER WAY

[@creationholic101]

Can you share more about it

[@timothyroche6445]

@@creationholic101 I use a Lansky, you need consistent angle

[@lownoter9459]

Waste of time (the video and the axe sharpening). Use a file.

[@danielthomason5685]

Edge overheated...ax trash

[@jadrianstanley7456]

Well it is sharper but you lost durability it going to chip or get ruff edge from hit with it that thin

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@roycehellion]

Oof! Cant even ise a strop right! I hope this is rage bait! Pure garbage. The single side flap dosc is fine, but everything else after if fine. And as others have saod. Its too steep of an angle.

[@kolibrikalimero.6697]

🇷🇸👷🧑‍🔧👍🥁

[@creationholic101]

Thank you for watching

[@user-ws6ki6ge4r]

Чоловіче не роби з мухи слона сокиру гострять так як потрібно користувачу в залежності що і як потрібно рубати малюй собі на малюночку а мужик гострить сокиру на око як йому потрібно Боже мій до чого ви дожилися ви що не з цього світу на лобі собі малюй а сокиру мужик має сам хоч наждаком хоч бруском вміти нагострити ще покажи як срати ходити

[@ABDALLAHALSHAYA]

I want to contact Khaby Lame

[@creationholic101]

Thank you for watching

[@BrockHansen]

Any surveyor would have finished sharpening before he got his marker out

[@user-bk9kb7xp4o]

Не катит! Не верьте!!!!

[@creationholic101]

It's quite effective, try it and feel it

[@roycehellion]

Absolute garbage. Ffs.

[@creationholic101]

It really works, you should try it and feel it

[@naroddyzmow5356]

Good ax have welded high carbon blade . You can sharp it over and over and it will be dull after 3 min over and over again

[@creationholic101]

Thank you for sharing your feedback