⚡A Step-by-Step Guide to Changing Front and Rear Brakes on Your Harley Touring Motorcycle⚡

TOOLS USED IN THIS VIDEO
12 POINT SOCKET SET - amzn.to/3RBeKo8 OR
10MM 12 POINT SOCKET - amzn.to/3PanX5d
MILWAUKEE M12 FUEL RATCHET - amzn.to/3z5V8kQ
MOTORCYCLE SCISSOR JACK - amzn.to/3FwJU9B or
MOTORCYCLE HYDRAULIC JACK - amzn.to/3mxIQek
FT LB TORQUE WRENCH - amzn.to/3GTFJFh
IN LB TORQUE WRENCH - amzn.to/3FnVl3e
TORX SOCKET SET - amzn.to/325bPiF
HEX SOCKET SET - amzn.to/32emFCX
3/8 DRIVE SOCKET SET - amzn.to/3H32J4P
In this video, we'll show you how to change the front and rear brakes on your motorcycle. Keeping your brakes in top condition is crucial for your safety on the road, and with our step-by-step guide, you'll be able to perform this important maintenance task with ease. We'll walk you through the entire process, from removing the old brake pads to installing the new ones and properly torquing the bolts. We'll also show you how to inspect your rotors for wear. Whether you're a seasoned rider or new to motorcycle maintenance, this video is a must-watch for anyone looking to keep their brakes in top shape. So, grab your tools and get ready to learn how to change the brakes on your motorcycle like a pro!!
As an Amazon Associate, I earn a very small commission from qualifying purchases. Thank you for your support and for helping our channel grow!
🔵My Gear - Sony Handycam - amzn.to/3mhAIyv
GO Pro Hero 7 black x 2 - amzn.to/3p9fxQK
Go Pro Helmet Mic - amzn.to/3e6vRM8
Packtalk Bold Duo Helmet Coms - amzn.to/3e4z5jd
Bell SRT Helmets - amzn.to/3GWdpBZ
Samson Go Mic - amzn.to/3Fale6Q
Video Lights - amzn.to/3shXUAk
Tripod - amzn.to/3uyvTnO
Mini Tripod - amzn.to/3snWtjR
Go Pro Gimbal - amzn.to/3yHw69H
Go Pro Mic - amzn.to/33MzPYp
Go Pro Mic Adapter - amzn.to/3p69c8N
Go Pro - Filters - amzn.to/33HS7dc
GoPro - Case - amzn.to/3p8CKCB
GoPro Stabilizer Gimbal - amzn.to/3tLk6Do
Camera Light - amzn.to/3NuVmao
Camera Mic - amzn.to/3IRQ7Oe
#sikbaggers
🔴GET SOCIALISTIC
🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
🔗Instagram - bit.ly/2HwBZge
🔗My LINKTREE - linktr.ee/sikbaggers
🎵All Music Licensed Through www.epidemicsound.com
🚩The video content is available for informational and educational purposes only. Steven Housden, SIK Baggers does not make any representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the video content. Steven Housden, SIK Baggers does not warrant the performance, effectiveness, or applicability of any sites listed or linked to in any video content. The information contained in the multimedia content (“Video Content”) posted represents the views and opinions of the original creators of such Video Content and does not necessarily represent the views or opinions of the Company. The mere appearance of Video Content on the Site does not constitute an endorsement by the Company or its affiliates of such Video Content.
Steven Housden/ SIK Baggers assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user.

[@michaelmagee4408]

Can Anti-seize be used in lieu of the "Squeaky Juice" ? Is the Template absolutely necessary?

[@sikbaggers]

so the anti-squeaky juice is just brake paste that acts as an insulator to eliminate brake noise or brake chatter. The small vibration you will get without it can cause that chatter and be annoying..not using it won't affect the braking power either, it just stops the chatter...same as on a car. You can buy brake paste pretty cheap on amazon and I really don't see why anti-seize wouldn't work...basically, it's the same thing. The template they provide just guides you in putting on an equal amount across the brake pad...honestly we use the Permatex brand or liquid molly and smear it across the whole back and install the pad. I use it on all brake pads and HD is the only one that even provides it or a template. Here is a small bottle or you can pick this up at local parts stores too. If you are doing pads pretty regularly you can get this in a bigger bottle as well for about 20 bucks. amzn.to/3KlKlJ4

[@bmacias]

Do you know why the Anti-squeaky juice only comes with the rear brakes?@@sikbaggers

[@franksaxton3583]

FWIW, I always just remove the pads without compressing the pistons back in. I then give the pistons a good clean to fix/prevent the brake from dragging. There's a dirt cheap caliper piston compression tool available to shove the pitons back in after the cleaning is done. Great video! Thanks for the detail!

[@kustomfxllc.switchpanels3144]

As always Steve, EXCELLENT video. I am very familiar with doing my brakes, but still watched your video that is easy to follow/understand and in layman’s terms so anyone can do it. You’re the best man!!! All the best to you & Mary! 🍻

[@sikbaggers]

Thank you sir!! Much appreciated! Really glad the videos are a help to everyone. Saving money is always good...just means more money for more parts lol

[@williamfranklin5917]

Awesome. Its like an internship watching your how to videos. I love saving money more than I do spending it. Thanks brother. You remind me of a Marine comrade I served with on the streets…..

[@sikbaggers]

yes sir! So glad to help and always glad to help save some money!! Youre very welcome sir!

[@sheepdoglogic]

I absolutely love how you said many times not to do more than one "click" on the torque wrench.. Excellent video sir, thank you. HOOAH!!!

[@sikbaggers]

aah man it drive sme nuts on youtube videos watching guys click it 3 or 4 times..yep thats on point! Well it was..now its over tight lol

[@jb0964]

One of the best mechanic videos on KZbin. Incredibly detailed with clear instructions and things to watch out for. Kudos!

[@sikbaggers]

Thank you, much appreciated!

[@bmacias]

Thank you for this video. Great job walking us through the job.

[@CTonyM]

Thanks Steve, I be changing my pads out this down riding season. So with your video and my service manual I now feel confident enough to tackle this project.

[@sikbaggers]

Thats awesome Clark! Youll save some money and get the satisfaction of doing your own work all while getting a better understanding of your sled...thanks for checking out the video and grateful to help!

[@user-qb9gj3rr5b]

Your vids are awesome! Greatly appreciate how clear and informative. Anytime I'm tinkering on the bike I look for your vids to help me along. Thank you!

[@sikbaggers]

I appreciate the support and always glad to help!

[@fawain]

Steve, thanks for sharing another excellent video with us. Very helpful and informative. I won't hesitate to do a brake job on my Freewheeler after watching your procedure.

[@sikbaggers]

Thank you and very glad it will help in the future..all about saving some money!

[@scottschiller1153]

Awesome video Steve! Great information for even an experienced member 👍

[@sikbaggers]

thank you Scott for checking it out! Im always looing for new or better ways to get things done...always trying to learn!

[@troyspidle2430]

Great video . Did all my brakes for the first time. Followed you step by step. Went really smooth👍

[@sikbaggers]

nice Troy! And you just sacved some money! Thats the best part aside from working on your own stuff. Thanks foe checking it out and glad the video helped!

[@jamesbecker5977]

This guy is the best! No joke! He explains things very well.

[@sikbaggers]

Thank you James! Much appreciated!

[@mikedanaher3413]

The most important maintenance you can do on a bike yet it’s the one that’s always overlooked. Great video Steve. 👍

[@sikbaggers]

Indeed! 100% and I hopefully with this video people can see just how easy it is to take care of them. Literally have done this a thousand times but even the first time only took less than an hour to do...super easy stuff..thanks for checking it out Mike!

[@JoeMigliore]

Steve, great video as always. Was able to knock both front and back out in an hour (including the one 'ugga dugga's'). Thanks for saving me a bunch at the local dealer.

[@Bamdoggs]

Awesome video!! Easiest brake job I’ve ever done on anything with brakes. Ur explanations made it even easier… Thx

[@sikbaggers]

sorry for the late reply...some of these slipped by me.. and thank you...always glad to help!

[@acetru7002]

Thank you, your video helped me swap pads on my 2015 road king, saved myself from going to the stealership

[@Howie2025]

Great how to video. You gave me confidence that I actually could do this myself. Love the repetition on how to do it. Saves me watching the process 3x over. Thx for the great work.

[@sikbaggers]

glad to help Howie!

[@AcesK9AGA]

You Rock Steve!! Always informative and to the point step by step for us dummies!! Thx

[@sikbaggers]

Always grateful to be a help! Thank you!

[@Tom-ck8hg]

Sehr starke Videos. Du hast mich schon mehrfach motiviert, Dinge an der Harley selbst zu erledigen. 1. Bremsflüssigkeit Wechsel, erledigt! 2. Vorderrad ausgebaut, mit neuem Reifen zum Reifenwechsel gebracht und wieder eingebaut! Top! Meine Harley: FAT Bob 117 cui ( nach Motorumbau mit TÜV und Eintragung in die Papiere), nicht selbst gemacht! Gruß aus Deutschland

[@sikbaggers]

Hey tom that is great!! Im glad that we can help you with your bike and you can save some money by doing it yourself!

[@imgzrona09uc72]

Excellent procedural video. A pleasure to watch!

[@sikbaggers]

thank you for checking it out! i hope it helps save some money in the future!

[@hecklerboy]

Glad I found your channel. Very informative and fun to watch.

[@sikbaggers]

I appreciate that! Thanks for checking us out!

[@paulkivi4923]

Another great video Steve. Very helpful stuff.

[@sikbaggers]

Thank you paul!

[@anthonymartin8769]

Thank you infinity for a thorough walk thru. Sooo helpful and great of you. Love your bagger by the way.

[@sikbaggers]

Thank you sir!

[@user-qw3zt9vl4n]

Great video Steve, again you make this look so easy. Thank you...

[@sikbaggers]

thank you J! Much appreciated and I hope it helps in the future!

[@Kenn1969]

Another great video. I always learn something from watching your videos. Thanks for what you do! God Bless!!✌️😎👍

[@sikbaggers]

Thank you very much Ken! I hope it helps in the future save you some money!

[@stevebauer459]

This step by step instruction video was awesome. I am not a mechanic, so it made it truly simple to understand and do. Thanks for taking the time to help folks like me who are intimidated by anything mechanical!

[@sikbaggers]

Hey Steve...glad you got it and the video helped...saved yourself some big bucks from taking it to a shop and learned some new things about your bike!

[@justanotherviewer52]

It's so easy when you watch Steve's videos. Thanks man.

[@sikbaggers]

Thank you DED.!! Much appreciated!

[@donaldhopkins1476]

Great video man! Thank you!

[@sikbaggers]

Youre very welcome Donald...thanks for checking it out!

[@hookdog8640]

Great video steve

[@houndsmanone4563]

Excellent brake replacement tutorial. Thanks Steve. 👍🏽🤠

[@sikbaggers]

thank you!

[@vinnypandolfo6195]

If im looking for informative content on how to wrench or add/remove parts on my bikes. I ALWAYS look for your content first! Thank you for just keeping it simple! Keep ya knees in da breeze Steve!

[@sikbaggers]

Thank you Vinny..glad to help man!

[@brianhinman982]

Excellent Video ! Thanks

[@sikbaggers]

thank you Brian!

[@johnchargualaf6599]

As always Steven you put out the best informative videos. Excellent demonstration👍👍

[@sikbaggers]

Than you john! Glad the videos help! Much appreciated.

[@mtlvlgmnfishing]

Love all your videos. I have learned a lot from them. Thank you for sharing you knowledge with us

[@sikbaggers]

Thank you! And glad they are helping! Be safe!

[@ericv79flh]

Excellent tutorial. Thank You

[@sikbaggers]

Youre very welcome..glad to help!

[@philp1072]

What is unbelievable video! You really did a great job at explaining and demystifying the whole brake change. Your videos are extremely helpful to someone who truly wants to learn how to service their own bike. If you ever have a class I'll be one of your first students! Thank you again

[@sikbaggers]

Thank you sir! Much appreciate and glad to help!

[@Mogenprice]

Top shelf tutorial! Speaking to (how people generally listen), not how you want to be heard. Super mindful narrative.

[@sikbaggers]

thank you very much and glad to help!

[@vermontking9060]

You are a very thorough teacher thank you.

[@sikbaggers]

glad top help and its great saving money!

[@robertturriff9836]

You do a very informative job!

[@sikbaggers]

thank you Robert! Much appreciated sir

[@JLK1978]

Great video as always. Thanks

[@sikbaggers]

Thank you sir!

[@jeffjohnson937]

Good video. I just changed my pads three weeks ago on my '18 Limited.

[@sikbaggers]

Thank you and very nice! Always great to save some money and get the satisfaction of wrenching on your own sled...saving money part being the best lol...more money for more mods! lol

[@03roadking]

Man ..this is the best detailed video for brakes ,,, I think I can handle it ,,, Wasn't sure till this vid ,,very much appreciated I will share for sure

[@sikbaggers]

Verry gad it helped you! Its not too bad of a job..pretty easy.

[@troywillard14]

Awesome job thanks

[@sikbaggers]

thank you troy!

[@talkingrock7011]

Thanks for the brake installation tips

[@sikbaggers]

Youre most welcome! I hope it helps save you some money down the road!

[@medcook57]

Finally someone mentioned it. Good point Steve, I have never removed the master cylinder cover on motorcycles or cars when spreading the pads apart. Never could figure out why nobody ever spoke of leaving master covers on.

[@sikbaggers]

yeah Ive never done it either...there is plenty of room in there to push that little bit of fluid up..youre moving the piston about 1/2 of inch...maybe ...thanks for checking it out!

[@patsamples6452]

Great information, thanks Steve

[@sikbaggers]

Youre very welcome Pat..I hope it helps in the future save some money!

[@gregmiller8882]

Great info thanks

[@sikbaggers]

Youre very welcome Greg!

[@michaelduda3218]

Excellent Steve, my first time doing rear brakes on my 2019 FLHT and spot on. Also used the OEM Harley pads (Brembo) and they fit perfectly. Wasn't sure what to do with the "squeaky juice" so thanks. Also appreciated little tips like tilting the caliper and taking off the brake line clips.

[@sikbaggers]

Really glad to help Michael!

[@CAGraphics576]

Great video! Thank you, sir!

[@sikbaggers]

youre very welcome..glad to help!

[@stephensmith2660]

Awesome video. Thanks

[@sikbaggers]

Youre very welcome.

[@pglcontractlogistics762]

Great video your are great buddy

[@albertovitali5581]

Great video. Many thanks from italy

[@sikbaggers]

youre very welcome

[@zackbusey1465]

Excellent video. Also, thank you for the inspiration and confidence in changing the break pads myself. 😊

[@sikbaggers]

Glad to help Zack!!

[@thomasmelton4609]

Fantastic video! Great detail and information. Defiantly had to subscribe.

[@sikbaggers]

thank you sir! Much appreciated.

[@nfan883]

VERY VERY VERY smooth & clear illustration. Save for future reference and subscribed. Two thumbs up.

[@sikbaggers]

Thanks for checking it out NF! Glad to have helped!

[@JiffyTapout88]

Awesome video! Very detailed! Thank you sir

[@sikbaggers]

Youre very welcome!

[@jcjustice3786]

Best explanation ever!!!!!👍👍👍👍

[@sikbaggers]

thank you JC! Much appreciated!

[@bjornfagervik]

thanks. helped a lot. hugs from Brazil

[@sikbaggers]

Youre very welcome!

[@carlbruhn1772]

Really appreciate the video.

[@sikbaggers]

Thank you carl!

[@briankilloran138]

Great video on the brake pad replacement.. thank you

[@sikbaggers]

thank you for checking it out Brian! Glad it helped!

[@Snakebyte777]

This was an awesome video. It was very helpful. You made it so easy. Thank you brother.

[@sikbaggers]

Glad to help and thank you for checking it out!

[@artiesparty]

Great video my man. Will be replacing my pads before Tomahawk. Thx!!!

[@rhonelmadlambayan4924]

Thanks brother!

[@sikbaggers]

You're very welcome!

[@michaelmanthey9858]

Thank you

[@sikbaggers]

Youre very welcome sir!

[@User7048]

Thanks!

[@sikbaggers]

Youre very welcome Mike!

[@jedklampet4082]

You are awesome! Thanks so much.

[@sikbaggers]

Thank you jed! Much appreciated!

[@805DD]

Ugga dugga. Love that description for proper torque. I use that technique quite often 😂

[@sikbaggers]

Hahah....thanks for checking out the video DD!

[@mmonroeapbi]

Excellent video. Thank you. I just road through Smokey Mountain National Park twice, and it's really rough on the rear brakes, haha.

[@sikbaggers]

Thank you and glad to help!!

[@sureshthuseperera9346]

Thanks you are a amazing person...

[@sikbaggers]

Thank you so much for your kind words and for watching, I appreciate your support!

[@rickyhawkins7407]

Thank you.

[@sikbaggers]

Youre very welcome Ricky! Thanks for checking it out...hope it helps save some money!

[@kmeades43]

Great video Steve... So detailed, thank you. Ride safe from Sydney Australia 🤘🤘

[@sikbaggers]

Thank you Kevin!! And thank you for checking it out man! I hope it helps in the future!

[@johnburk5748]

Great video, thanks

[@sikbaggers]

thank you John!

[@Samoan_D]

Steve ty your the man ty for your videos helped me many times

[@sikbaggers]

glad to help!!

[@samval2879]

THESE GUYS ARE ON TOP ON EVERYTHING, ESPECIALLY HD TOURING MODELS. LISTEN TO THEIR EXPERIENCE. THANK YOU.

[@sikbaggers]

Thank you Sam! Much appreciated! I hope this helps you in the future to save some money!

[@samval2879]

@@sikbaggers My Wife from Marion I know your, area Well. I bought from Campbell's and Diamond . I have 15 SGlide Charcoal. Bad dad Bags do my own work

[@sikbaggers]

@@samval2879 you know when someone knows there when the bring up Campbells..so many years ago and man I spent a lot of money there...ever down this way again look us up!

[@samval2879]

@@sikbaggers I like to. Advise on woods Or Best cams mid range I have it with stock cam . I have V H FP3 Tuner, no cat, slash Vance Hines duals with stock crossover. Heavy Breather HD best ..Runs great. But I should leave it be? Never any problems. I do my own wrenching. From 1989 on my FXRS Evo. I have a O3 Deuce, Complete HD Scream Eagle cams 211. Heads 95 inch Pulls close to 98 hp. 96 Torque. Running Mikuni carb 45 believe me I blow up a lot of bikes with that thing but everything breaks on that freaking thing enjoy and I'm still into the twin cams the bastards wants so much money at Harley for a f****** new bagger it's ridiculous they need to step up production so these guys are flooded so they'll deal on this s*** again

[@badbob]

Great job. I have ABS. It still very helpful. Tnx.

[@sikbaggers]

yeah not much difference on the abs systems just a wheel speed sensor...glad you got it worked out and the video helped! be safe!

[@sidneysnottley6414]

Nicely done ... Cheers.

[@sikbaggers]

thank you!

[@daver8298]

Nice video. Answered my questions. Liked and subscribed. Ride safe!!

[@sikbaggers]

Glad the videos helped!! And thank you very much for the like and sub! Much appreciated!

[@thomasfrawley5798]

Another good video I've done brakes on my 78 shovelhead but not on my 2017 heritage softail But I think I'll do it myself next time.T hanks again .TOM F

[@sikbaggers]

youre very welcome Tom! Glad to help!

[@darrellswaney1064]

Thanks a lot very good

[@sikbaggers]

thank you Darrell

[@ridefitnation]

You are the man. Thank you for this video

[@sikbaggers]

Thank you sir!! Much appreciated!

[@donaldwelch4755]

Thank you sir

[@sikbaggers]

Youre very welcome sir..hope it helps in the future save some money!

[@josephweaver9674]

i learn so dang much watch your videos.. Thank you!

[@sikbaggers]

Youre very welcome Joseph!

[@2147crew]

Good stuff!

[@sikbaggers]

Thank you sir!

[@nuffdoggiggey4103]

Nice bike .

[@sikbaggers]

thank you!

[@Bagrman-kt1ot]

I’ll keep this video on file .. thnks 👍👍

[@sikbaggers]

Awesome!! Hopefully saves you some money down the road!

[@crossfitpersevere5987]

Freaking awesome thanks man!

[@sikbaggers]

youre very welcome!

[@crossfitpersevere5987]

@@sikbaggers before I changed my pads I had a bad screech from the back breaks. After the pad changed the screeching is minimal but still there. Do you have an idea what is causing it? Or Is this normal?

[@sikbaggers]

@@crossfitpersevere5987 you should be able to eliminate all noise from the rear...key is clean and lubed. But it also could be the type/brand of pad you used...was it the HD pads?

[@crossfitpersevere5987]

@@sikbaggers yes HD pads, and no I did not clean or lube the calipers. I thought to myself I forgot the break cleaner oh well…. Well nothing like doing things twice.

[@skiphavener4688]

Great instructional video Steve but I cover the exhaust and frame area and lay the caliper on it rather than letting it hang on the brake hose

[@sikbaggers]

Thanks Skip...I have a S hook I made and couldn't find...well of course until after I shot the video..lol But yeah specially on older bikes with a bit more brittle lines you for sure want to support it. thanks for checking out the video!

[@jeffhennings6579]

U sir make the best videos plan doing mine on my 2020 ultra limited in spring currently sleeping for the winter here in upstate NY 🥴😢

[@sikbaggers]

Thank you jeff and glad to help! Save a ton of money by doing it yourself and also get to learn more about your bike. WIN WIN..happy holidays!

[@paulg5835]

I love the channel. Your videos are always so helpful, informative and easy to follow. I’m just curious on why the grease is used for the rear and not the front? Is it because it accumulates more grime etc?

[@sikbaggers]

Trust me...at first I had the same question...asked a HD tech that had been there for literally decades and he said I dont know...swear to god...he said thats the way its always been and he just follows the service manual lol it wont hurt anything to add it if you want though..and honestly I usually use EBC pads and none at all on the front or rear..never had a squeak issue.

[@timothypuccinelli2815]

Great video!!! Putting front and rear pads on my bike this winter. Glad I found this video. I do as much DIY maintenance as possible thanks for putting out this quality video. Whose bars are on the bike in the video.

[@sikbaggers]

thats awesome man...glad to help! They are the Road 6 Customs Naked Bars. I have a video here on the install. kzbin.info/www/bejne/aIHdq2OChM5rfJIsi=r5Y-qbe7_geFyq1m

[@timothypuccinelli2815]

Thanks again. I will check out the bar install video.

[@donaldwelch4755]

Is the a.b.s tuchy like some cars when you decompress the pistons it messes with the a.b.s system

[@sikbaggers]

Ive never had an issue on HD's decompressing the pistons...abs or non abs. The service manual actually tells you to do it.

[@sirsloth8579]

Steve...as ways GREAT VIDEO brother..One other thing you might want to cover is a BRAKE FLUSH. Most riders dont realize the importance of changing that fluid out.

[@sikbaggers]

Yes sir...ill be doing that soon! Its on our list! Thanks foe cheking it out too man.much appreciated!

[@robertbenz]

Great video. Thanks for doing this. Is the same with the ABS system?

[@sikbaggers]

Yes..you will have an ABS sensor but other than that it is exactly the same. Make a mental note of how the sensor is on and put it back the same way. There is nothing you need to do extra because it is abs.

[@nelsonm7036]

Great video. Easy step by step. I'm putting on new tires and will reference this video to do the brakes as well. Would you happen to have 2012 touring service manual? Thank you Sir!

[@sikbaggers]

Thank you and yes I do...click the link and itll take you to the my personal google drive upload of the 2012 service manual. top right corner should be a down arrow ...just click that and you can download it drive.google.com/file/d/1sNp1TtHaO6vusKMTkLyBURMzhLqqOBkv/view?usp=sharing

[@robertcurtis9449]

Just bought new brake pads for my 2019 Road King. I didn't like the feel and new pads made a big difference

[@sikbaggers]

Nice! Pretty easy fix if the pads that you have are worn or maybe the wrong pads for your riding style!

[@hookdog8640]

Steve, I would recommend throttle body salvent cleaner that's safe for rubber and plastics. Most solvent cleaners expand rubber.

[@sikbaggers]

Great tip ill check that out!

[@rosekransconst.2495]

Great job I always wondered how hard this is to do ! Pretty sure I can handle it hope to run across ya in sturgis!

[@sikbaggers]

Absoutly...if you see us out make sure to stop and say hey! We will be at the Advanblack tent on the 12, 13th for a live tin swap for sure..other than that we will be kind of all over the place lol thanks for checking out the video!! Glad it helped.

[@rosekransconst.2495]

@@sikbaggers 😂 I’m just now reading this I was the one who talked to you upstairs’ at the old picture photo shoot in deadwood Tuesday morning hope all went well and can’t wait for the sturgis videos!

[@sikbaggers]

@@rosekransconst.2495 LOL yeah pretty crazy meeting there...but was nice meeting and chatting...everything went smooth and ill be doing a live feed I think Saturday night to talk about Sturgis and maybe put out a video of some of the riding.

[@RB-tx4mn]

Question. The "anti-squeaky juice".... can you use the extra on the front pads or is it a no-no?

[@markkramer2908]

Thanks Steve for the video. Wondering about the service manual, Do I need a 2 manuals if I have a 2021 Road Glide Special and a 2022 CVO Road Glide Limited? 1 Shop said I need 1 for each bike and another shop says no I don't. I should just get the 2022 service manual with the CVO extra manual. Thanks for all the video's you do to help us save tons of money

[@sikbaggers]

All touring models are covered under the same manual...so its by year...however there is little to no difference between the 21 and 22...so significant changes.