Καλησπερα φιλε μου φοράω τον ίδιο κινητήρα σε Passat b6 τη σετάπ εχεις κάνει αν επιτρεπαιτε
@AGChiptuning7 жыл бұрын
What are those gauges please?
@PrithwiRay8 жыл бұрын
Nice.. what clutch are you using?
@Dikonou8 жыл бұрын
+Prithwi Ray I am lucky to have from factory a 2.0 gearbox, so I have the 240mm disc.....I have the sachs performance installed....
@PrithwiRay8 жыл бұрын
can you share the model of your engine and gearbox if possible..
@Dikonou8 жыл бұрын
+Prithwi Ray 1.8tsi CDAA and KXD gearbox
@antymechanik71917 жыл бұрын
its not factory bonus, someone was swap gearbox....lucky for you
@patrickpecha34024 жыл бұрын
ANTY MECHANIK 240mm Disc is Original
@Alfsen954 жыл бұрын
Can i ask what Electronic boost pressure regulator you are running and why? Iam having issues with overboosting after K04 swap and tune...
@Dikonou4 жыл бұрын
Are you overboosting from some rpm and above? 6000 for example? If so then you have a closing throttle body issue.... And it keeps on building pressure
@Alfsen954 жыл бұрын
Dikonou No, it seems to be hitting the limit of what the OEM map-sensor can register. It hits about 1-1,3 bar and just goes to limp mode. Logs in VCDS says it hits about 2500-2600mbpa and the oem map sensor can only register around 2580mbpa i think.... no leaks to find anywhere in the system and wategate moves, swapped N75 valve with no luck
@Dikonou4 жыл бұрын
@@Alfsen95 you should "force" via program the map sensor to "see" less pressure. That's a common thing with the 2.0 bar map.
@LeeCooper20077 жыл бұрын
what type of bov/dv is that?
@Dikonou7 жыл бұрын
It's a Forge dv FMFSITVR with Relocation foe the K04 -064 on the 1.8 tsi
@robertmitrea32514 жыл бұрын
how much power can the stock internals take safely?
@Dikonou4 жыл бұрын
Depends on the user!!!! Beiing a normal user and knowing the extention of the mods I would say about 350 hp and 450nm.... For every day use.....
@robertmitrea32514 жыл бұрын
@@Dikonou ohh ok, thank you, it s more than enough for me, I m, aiming just for S3 stock power levels.I know from other users the old 1.8T (BAM) piston rods couldn t really handle more than 350NM and I wanted to know if this is stronger.
@Dikonou4 жыл бұрын
@@robertmitrea3251 wow wait a minute.. My engine is tsi cdaa 1.8 Do you have the 20vt?
@robertmitrea32514 жыл бұрын
@@Dikonou no no.I have the CDAA too.But I mean, they are similar displacement and I though they might be similar in limitations too
@Dikonou4 жыл бұрын
@@robertmitrea3251 nope different engine, much stronger if you put the oil consumption aside...... Strangely mine does not seem to have that problem....