A90 Toyota Supra Air Oil Separator Install

[@octurbojoe]

Solid. I love the pre-routed hoses.

[@VerusEngineering]

They are definitely a nice touch.

[@Nismo_Zed]

Nice piece of kit. I was surprised how much oil was on the inlet pipe when I replaced the intake.

[@VerusEngineering]

Thank you!

[@Nismo_Zed]

Verus Engineering BTW, I noticed the hoses don’t require clamps, will that be an issue?

[@VerusEngineering]

@@Nismo_Zed It will not.

[@patricktan4096]

Can this fit with an aftermarket intake such as from blitz, eventuri or hks?

[@VerusEngineering]

Yes, please review the bottom of the product page for a short fitment list. It will not work with all intake systems, but it will work with some.

[@covak2002]

Why 1 pipe bleeding to 2 and then 2 back to 1 ? why not 1 in and 1 back interested to know as after 1

[@DarkTrap]

Why no dipstick ? To check amount of blow by

[@VerusEngineering]

There is a petcock on the bottom that can be unscrewed and you can check/drain the AOS.

[@TheGeneMan1]

I wish this fit with the armaspeed intake 😢.

[@VerusEngineering]

You can always swap out your intake to one that does work with it. 😉

[@verginsergin]

Are we still planning on running a drain tube from the bottom to the engine?

[@VerusEngineering]

We offer a Drain/CCV Line Kit for this exact application.

[@Memoira]

How often should you manually drain the AOS if you don't have the drain/ccv kit?

[@VerusEngineering]

Just depends on how much blow-by you are seeing. We advise checking it every time you put gas in the car. If there is not much blow-by, then check it less often.

[@st.augustine_90]

So if we don’t have the auto circulate is there anything else to connect?

[@VerusEngineering]

Nope. You will just have to manually drain the AOS ever so often.

[@becool565]

do the offer a set it and forget it kit now since this is 2 years old?

[@VerusEngineering]

Yes. I believe I just responded to your email regarding this. We have an optional drain kit.

[@becool565]

@@VerusEngineering yes sorry thank you

[@lIlIllll1]

@@VerusEngineering can you provide a link to this? Im checking your website but I think im just blind and can't locate that kit lol

[@VerusEngineering]

@@lIlIllll1 Please see the video description. It is listed there.

[@lIlIllll1]

@@VerusEngineering Is the link in the description the "set it and forget it kit" that Grow is referring to in his comment (as well as me)? Or the "optional drain kit" as you referred to it as in your original comment to Grow?

[@smilinjoe23]

So is this like oil catch can ?

[@VerusEngineering]

Similar, but catch cans do not have the option to recirculate the separated oil back into the engine. Our AOS kits offer a drain back option that makes it a worry-free system. Catch cans must be maintained and drained on a normal basis.

[@JDM_eastcoast]

I have the BMS one similar routing hose. Have you collect any oil on the catch can? I havent seen much on my oil catch can

[@VerusEngineering]

Very little from our testing out at the track. That's just the sign of a healthy engine I would say.

[@JDM_eastcoast]

@@VerusEngineering yea i havebeen driving on my car and i havent seen any..which is a good sign but i also hear this is not the only port that comes out from crank. there is a secondary port at the bottom which does brings out blow by oil back to the turbo inlet. Can you guys confirm if this is true?

[@VerusEngineering]

@@JDM_eastcoast Yes, there is.

[@JDM_eastcoast]

@@VerusEngineering please check this 2ndry port because apparently my buddy ran oil catch can still seeing oil blow by at the turbo inlet..which quite possibly coming from 2nd port. it would be good to get this 2nd port routed to oil catch can as well. thanks guy. keep up great work

[@VerusEngineering]

@@JDM_eastcoast We'll keep it in mind!

[@jrlim7615]

Please make one for the porsche 987 cayman. The stock aos is prone to failure

[@VerusEngineering]

We can sell the AOS separate from the kit. Once customer has actually done this with his 987 already.

[@LaoTYang]

Is the automatic drain kit available yet? It’s been 2 years…

[@VerusEngineering]

Yes. It has been available for some time. www.verus-engineering.com/shop/a0299a-aos-drain-crank-case-vent-line-kit-mk5-toyota-supra-1870

[@Ghostinthe90s]

Any way you can make a bracket for us guys that use the LGmotorsports Aux fuel pump kit? They have a brackets positioned in the same spot. Much appreciated

[@Ghostinthe90s]

For reference I’m speaking about this kit and it’s at the 10:35 marker kzbin.info/www/bejne/nKXSg6yMmdKbb9E

[@VerusEngineering]

Unfortunately, we most likely will not be offering a secondary bracket. The AOS can still be utilized from mounting in a different location, you just wouldn't be able to utilize the pre formed hoses.

[@AndrewMoore1]

Have you had anybody install this on a 340i? wondering about the bracket fitment as well as hoses. Thanks

[@VerusEngineering]

The AOS itself would work, but the mounting bracket and hose routing most likely will not work.

[@AndrewMoore1]

Thanks. I would love to see some of your B58 products for the 340i.

[@defender1nation929]

Is the resonator delete still necessary if we have an Injen 2300 closed box CAI already installed? Probably not but making sure, thanks.

[@VerusEngineering]

No, because a CAI deletes this already.

[@xplizitremix]

Do we need to clean this after use? If so is there a how to?

[@VerusEngineering]

No. We have been running one of these AOS units on our shop BRZ for over 7 years now with the original filters and mesh media. If for some reason you need replacements over time, feel free to email us and we can sell replacements.

[@tonyrodriguez1622]

Would it fit a m340i

[@VerusEngineering]

No, this kit is very specific to the Mk5 Supra. It might be able to be modified to work, but you would most likely have to source your own hoses and figure out a mounting bracket solution.

[@peterbiviano747]

Do you think I need 1 I Dnt do track days at all but I do have stage 2 tune atm thanks

[@VerusEngineering]

It would still be useful, simply for the longevity of the engine.

[@BoostedAP1]

Does this one catch oil? I have been researching reviews on oil catch cans and some people with the Forge and Mishimoto cans are bone dry, no oil.

[@VerusEngineering]

Yes, it can, but it is much the same case as not all motors will have oil in the catch can.

[@jamiemanalo5929]

Is this the one will help to my pure800 oil leak?

[@VerusEngineering]

It's not going to help with an oil leak, but this will keep oil from getting into the intake system. We are also working on a drain back kit that should help this issue.

[@fullracesti]

You think this will fit on a rotated turbo?

[@VerusEngineering]

Possibly, depending on the setup.

[@marioa9310]

will the a90 turbo shield work with my 2021 gr supra?

[@VerusEngineering]

Most likely not, but we have not had it confirmed one way or the other.

[@JoeyD215Philly]

Should I buy this setup now or wait for the upgraded one 😬

[@VerusEngineering]

You will still need to buy this setup. Anything else will be an add-on kit.

[@JoeyD215Philly]

Verus Engineering I ordered it this morning LoL thanks and can’t wait !

[@VerusEngineering]

@@JoeyD215Philly Should be able to get it shipped out on Monday!

[@Collector1296]

How often should you drain it after install?

[@VerusEngineering]

Just depends on how much oil the AOS collects. We suggest checking it initially every time you fill the car up with gas. If you check it and there is little to no oil collected, then you can elongate the time in between checking/draining.

[@Collector1296]

@@VerusEngineering Good to know. I literally just got done installing it on my 2022 A91-CF Edition and it makes the engine bay look that much cooler. Keep up the great work over at Verus 👍

[@VerusEngineering]

@@Collector1296 Awesome to hear! We certainly appreciate the support.

[@Nota2jz21]

Will this fit with an aftermarket cold air intake?

[@VerusEngineering]

Yes, but not all aftermarket intakes. We have a short fitment list available on the product page on the website.

[@beethoven8256]

Can I install this on my ‘22 GR Supra? I haven’t done any mods yet. And is it safe enough not to void my warranty?

[@VerusEngineering]

Yes and no it will not void any warranties.

[@beethoven8256]

@@VerusEngineering I have an MST air Intake, and I’m skeptical about its fitment.

[@VerusEngineering]

@@beethoven8256 we have had a handful of customers get it to work. As our fitment list mentions, for the MST Intake to work, you have to push the intake box as far forward as possible and even then the bracket will slightly sit on top of the rubber padding from the intake. It has been done a handful of times by customers but does require some finagling.

[@beethoven8256]

@@VerusEngineering I just got this today on my front porch. Was wondering if we still need a tune when this one is installed?

[@VerusEngineering]

@@beethoven8256 no tune is needed for installing an AOS.

[@stockkid8515]

HI is this for PCV or CCV side ?

[@VerusEngineering]

CCV

[@trnql_noir]

​@@VerusEngineering Didn't Eric say the CCV side was in development? Therefore this AOS is currently PCV Side? Correct me if I am wrong. Thank you

[@lesRassembleursEventCars]

Very nice

[@VerusEngineering]

Thank you!

[@B.C.SUPRA420]

doesn't work with hks full carbon race intake...heat shield is in the way..... just saying

[@VerusEngineering]

So have you tried to install the AOS with this intake? If so, we will update our fitment list on the website.

[@B.C.SUPRA420]

yes. Unfortunately, with the "full carbon" kit. i.e. the carbon box/shield that the intake sits inside of...the mounted heat shield on the exterior prevents proper mounting.@@VerusEngineering

[@VerusEngineering]

Any chance you can trim the box/shield to work? We have updated the website to reflect this.@@B.C.SUPRA420

[@B.C.SUPRA420]

I suppose someone could cut the shield to fit but would require specialty tools I do not possess so as not to mangle it and then a clean-up or respray to the edge(s) of the heat shield, If you don't care about the looks of the thing after modification (I do) then yes you could.@@VerusEngineering

[@B.C.SUPRA420]

I think the race kit w/o the box (the red mushroom) comes with a smaller heat shield so it mat be possible to fit that one with your a.o.s.kit. my currently installed kit name and pt# Dry Carbon Racing COLD AIR INTAKE FULL KIT Suction intake kit GR SUPRA -HKS -70026-AT002@@VerusEngineering

[@biggusbestus551]

$56,000 dollar car that needs to be modified ? Good job Toyota and BMW ...

[@VerusEngineering]

The car doesn't have to be modified, but many people enjoy doing so.