600+HP 2.3 Mitsubishi Evo 5-9 Short Block ASSEMBLY

So the Mitsubishi Evo 5 engine is coming together now with the short block assembly finished.
Spec:
Cp Carrillo pistons 9:0:1 ratio
Manley Tuff I beam connecting rods
Acl race main/big end bearings
Arp Main bolts
Cosworth H11 head studs
follow me on instagram for updates: / officialaaronaaron

[@AaronUnknownPerformance]

Thanks for taking time to watch this build. What you see in these vids are the easy work its all the measurements off camera that take time

[@53gsiturbo20]

Thank you for taking the time to make these videos,definitely the best on KZbin without a doubt

[@patrickdonohue7719]

Mate your work is second to known 👌👌 you know your stuff

[@shaunwest3612]

It's a pleasure Aaron 👌

[@adamsmith9132]

whoever taught you how to build engines has done a great job your work is brilliant i love watching your vids keep up the great work

[@geezawannapleaza1235]

If there was a man to build an engine one day that saves the earth then Aaron it would be you haha

[@mikescamp5610]

This geezer deserves 1m subs he’s the bollox 👌

[@kevtwist1167]

Watched many of this guy's videos. This guy knows his shit! 👍

[@joeyturb0]

By far the best channel out there man love how you get into detail with your builds.

[@nurburgringobsessed5722]

Maybe a little bit obsessed with this build 😂😂

[@markcozzie]

If you think this is bad watch "jafromobile",thats engine building 101. Says hyundi engine but its a 4g63 so i used the info when i had a evo2/3, but it's basically same from evo 1 to 9..

[@danblake8362]

Wicked mechanic right there top work Aaron 👍🏻

[@_Hangman]

Perfect Sunday night viewing...looking forward to part 2

[@br4d101]

These vids are excellent quality, your informative and don’t try to rush through explains stuff, good job 😊

[@AndrewSandilands-tk6st]

Very interesting set of videos Aaron...it’s now very obvious to me why an R1 engine rebuild a ‘’mechanic’’ helped me complete a few years back ended with an engine replacement 🤦‍♂️

[@richie9777]

Great work Aaron

[@zafiradaz]

Aaron just brilliant again love watching your vids your knowledge is just never-ending.

[@Hubsta_Evox]

Loving this series. Keep up the good work wombat..👍

[@matthale9596]

Great work, really enjoying this series 👍👏

[@blueballs_m135i8]

Fantastic mate once again your attention to detail is second to none 🤙

[@shaunwest3612]

Great video Aaron, amazing job,very informative, looking forward to the next episode 👌👍😀

[@darylkarshe7427]

As always Aaron, mint video 👍

[@jaynelson26]

Very professional work great to watch and learn 👌👌

[@53gsiturbo20]

Great video as always could watch your videos all day.Also great idea to do a spec sheet of every engine you build up for future reference,will be a very healthy engine once you're finished with it 👍

[@astravxrred1085]

Excellent work. Learn something every video.

[@deanclark828]

Love these vids, top top work

[@sean59052]

Been waiting for the next video😂 love you content 👌🏼

[@AaronUnknownPerformance]

Thanks for watching 👌🏻

[@user-ho4bz9uc1w]

Pure filth excellent work bud

[@sugar4522]

Legend

[@jasonjuggler3457]

id love to forge buld an engine myself, you have very good brains to be able to do this 👍

[@Keane-to-clean]

You know to much man 🙈 ur a wizard Harry

[@lewishill64]

You know your stuff. Love these videos. I want you to rebuild my Z20LET.

[@hi2lenduffy837]

It’s like a long magic trick watching as hard as you can to work it out, but not really able to work out what is happening, I’ll leave it to the pros like yourself 🤣

[@TheThomo25]

Cant thank you enough for the content you upload! You should join up with Haynes & do a car encyclopedia! Lol

[@mrmilner1096]

Looking sweet

[@matthammond4754]

Interested to know how you work out head gaskett thickness. Keep up the good work

[@user-xq1ms6of5t]

Dogs nuts as always 😎 😎

[@BigMin100]

Aaron you forgot to mention that ring gaps have to be 180 degree from each other so there is no blow by

[@andrew97056757]

Love the vids ! What’s the name of tool you use to guide the pistons in?

[@khemrajhsamaroo3671]

Hi, great videos I must say. What bearing clearances do u use on the 1000whp builds ?

[@thewippit2400]

Megga build 👌

[@otacon4065]

nice one geez

[@ethompson5061]

First!!! For an awesome channel!

[@LeiaCake]

So much like ❤️

[@df9834]

Aaron who do you work for? And why will you never show your face! Would be great to see the legend behind this phenomenal work 👌👌

[@CP_FPV]

That’s why he calls himself Aaron Unknown. I don’t think he wants to be known. He’s also known as the Z20let ninja lol just kidding. Looks like he works for himself at home, mechanical repairs etc

[@Hasdac1896]

When's the face reveal coming?..😀

[@jasonjuggler3457]

do you fancy men?

[@Hasdac1896]

@@jasonjuggler3457 No but ya dad does...

[@jasonjuggler3457]

@@Hasdac1896 says you lol

[@Hasdac1896]

@@jasonjuggler3457 I'd say it to ya face to...😀

[@jasonjuggler3457]

@@Hasdac1896 too bad I don't go to gay bars

[@jeronimodantas7792]

meu jovem estas peças serve no 4G93K

[@markcozzie]

Aaron do you plastigauge? ,sorry if I missed it? And what suspicion make you start looking into this engine,why did you think it mite have problems,but wow lucky you did because you caught it at a good time before did a lot more damage,👍

[@AaronUnknownPerformance]

Go check the video before this which explains everything. Plastigauge isn’t accurate enough, everything is measured using a dial bore gauge and micrometers.

[@mcjjordan]

How do you adjust the ring gap?

[@Hubsta_Evox]

Also interested to find out

[@jasonjuggler3457]

was wondering this too, maybe a file?

[@michaelmatthews8171]

IF you have to make the ring gaps bigger do you file the gaps?? if you know what I mean And the ring gaps are not in line with each oather??

[@markcozzie]

There's a special tool to use its like a wheel and with the ring flat you file from one the gaps edge,(on all rings you file same edge say if left do all from the left,)should be loads videos on KZbin....

[@markcozzie]

When installing the pistons yes you mix up the ring gaps when installing the piston in the block,there is a set way,like top ring at 12 o clock,middle ring at 6,oil ring at 15 minutes past...hope that helps..

[@michaelmatthews8171]

Thanks for that, that's what I thought...

[@michaelmatthews8171]

I had seen someone filing with a file!!!!!!

[@markcozzie]

@@michaelmatthews8171 What like a hand file??,Surely not?,then the edge would be all over the place lol.

[@TAG247]

FAKIN GEEEZAH

[@davidbeer]

Wheres the flamin wombat?

[@AaronUnknownPerformance]

On holiday 🙀

[@superbrit3845]

Are you a time served mechanic or self taught???