ABANDONED 1958 Apache gets CHEAP makeover. WILL IT DRIVE?!

[@frankenbrain3300]

Let’s hear it for FrankenCarb!🤘🏻🤘🏻

[@PuddinsFabShop]

Dang right!

[@GWAR1982]

@@PuddinsFabShop kzbin.infoYF9IoeSA31w?feature=share

[@adamburrage4591]

Can we hear it for merchandise delivery to Australia???? I really hope so one day cause I love what you are doing. 🤘🤘

[@albertoreyes6318]

@@adamburrage4591 nnnn k oppl pi 88899999⁹99⁹99999⁹99

[@epk2027]

D

[@gilbertelliott5755]

A trick I learned from an old guy when I was a young guy: Old engines often had stretched timing chains so the lights often didn't jive timing marks. He would fill a glass with water then set it on the fender. He would adjust the distributor so the water in the glass would develop concentric circles from the center. That meant the engine harmonics were balanced.

[@joegray1155]

This is a great thing to know, thanks for passing it on

[@Blindbat1337]

Prayers for your wife and her heart monitor thing.

[@LobbyDaLobster]

Yeah. Hope everything is good

[@A_M_F_M_A]

Hope you're having a good Monday

[@mr.nobody7601]

Man it's insane how good that paint looks after the buff job!

[@That70sChannel]

This is why modern two-stage paint systems suck. You can't do that to a clear coat when it inevitably goes away. I think clear coat was invented by the paint industry to sell more paint.

[@OldsmobileCutlass1969Va]

Modern paint is super thin... Just add an equally thin clear coat... D U N!

[@ricktoole9991]

Best part of Monday,,,,,,, Puddin time

[@DStead2239]

Tuesday* You Murican's livin in the past🤣

[@Brianshrader6357]

That 58 is sweet.You two knocked it out of the park.

[@richardbabik8383]

Cool to see a mostly stock project, brining around a gem.

[@pugliesesspeedshop]

Man this thing cleaned up good!! Ole Slick's fam is gonna dig it for sure!!

[@steveoakes8824]

So rare to find a 1958 Apache out of commission in that great of condition. Many would love to own it. Slick's family is going to be so surprised to see what great work you have done to revive it to an awesome looking daily driver.

[@nastyn8te328]

The fuel pump vacuum attachment is for vacuum windshield wipers and the choke should have a hard line going to the exhaust manifold. There is usually a hole in the exhaust manifold that you push the hard line into it if it has one.

[@klc3478]

I can’t believe the condition of the body on that truck! She’s beautiful, and I wouldn’t change a thing, as far as looks go! Loved the video!

[@gerry-p9x]

If he still got it throw an alternator on it

[@e3672222]

Buffing that old paint did the trick. Great job guys.

[@TheKustomBeardoh]

What a beauty that truck is!! She shined up real nice.

[@kyleburgess6475]

When slick shows up “R Ford Ranger?” Got me busting up. Then again at the end.

[@jda79]

The man who made Monday the day to look forward too

[@j.sargent9172]

No kidding, in all of my 31 years I have never looked forward to this day until I started watching puddin like 2 years ago

[@luckyholden3213]

Hey Puddin, you got that Apache lookin so sweet that you got this Apache (WMAT) wantin it! ❤❤❤😊

[@chewyakarieckenicholas6049]

That truly is a beautiful truck I have no doubt that Slicks family will absolutely love it

[@jeffryblackmon4846]

Do a few more of these 'radical' US-made vehicles and your mistakes will go down to zero. Practice, practice, practice! Slick and you have done a phenomenal job cleaning and buffing the truck. It looks great with the whitewalls and the white rims. Merry Christmas to all!

[@bradsmn]

The "amateur weekend" comment by Slick was the best. It sure cleaned up great! You've done some nice work on it. That is one beautiful truck.

[@yjmoneypit]

Hope miss Puddin is ok and the rest of your family as well

[@wayneyoung6094]

That truck is turning out awesome! Beautiful old rig!

[@geion54]

Looks like a brand new truck, I like it.

[@lottiecooper609]

If anyone plans on becoming a mechanic they need to watch this video. If you don't have any patients, than this might not be the career for you buddy!!! Always expect the worst because most of the time things never go right. This way you will only have yourself to blame when things go wrong!!! This is why mechanics get paid the big bucks, and rightly so, they deserve every dime they make!!! Thank you to all the hard working mechanics out there for keeping us safe!!! Thank you doctor puddin for sharing, and all your hard work without two hours of talking!!!

[@LimitedGunnerGM]

Those hubcaps would be a great decoration for the new shop!

[@LimitedGunnerGM]

I’d buy and daily that truck 24/7

[@mattaker896]

I've loved this series AND this ol' truck! BTW, the hub cap came from an old self-propelled rototiller "R" - but you probably knew that.

[@johnswick4593]

I really like the old Chevy iron. Nice job boys.

[@bmxspert]

Still the best on youtube

[@Johnny-jr2lq]

Omg 😆 cleaning the water pump fittings had me rolling. smh 🤦‍♂️ that’s way I love this channel great content Puddin

[@lvmychvredline7514]

Hot damn she shined up nicely the center caps are not bad neither.looking better and better everytime you guys touch it.

[@buckroger5850]

A puddin video to help my constipation 👍 THANK YOU SIR !!

[@donlandenberg8126]

Nice job! Glad to see that GM coming along. Thanks for taking us along.

[@DougGleich]

You need slick on the main channel, y’all’s banter is funny as hell and it makes the second channel that much better!

[@AaronsRandomLife]

Puddin' those fuel pumps usually go between manifold vacuum and the wiper motor. It can really go between manifold vacuum and anything that needs a good healthy source of vacuum. This was a parts store option to help vacuum options continue to work on tired old motors that didn't have any vacuum left. I had one on my 51 flathead with a giant cam and it definitely helped.

[@Danny-T87]

😮 Dang you guys made her pop!!!!✨✨✨✨✨

[@Rideaholic069]

That vacuum line does indeed go to the wiper motor and there should be a second line out of the wiper motor to the intake.

[@rickn8or]

But I no see no vakkum motor for the windy-shield wipers. (Didn't the '58's have electrick wipers?)

[@greggwalden5416]

Puddin that hub cap with the R came off a RAMLER from the 60dys!

[@ryurc3033]

@@rickn8or they came on with the switch, no motor running. Can't be

[@rickn8or]

@@ryurc3033, I thought so. My '56 Chebby had electrick wipers, so...

[@stomper2582]

@@rickn8or I know the 57 chevys’ could have either. Higher end cars had the electric and lower cost ones had the vacuum.

[@modelnutty6503]

when she's fully roadworthy she'll be a great little run around pickup. Chevy straight 6's aren't hard to come up with or to maintain, it'll give good mpg too if tuned right and you're half nice to it.

[@AaronBrevik]

Good looking truck man, that was a nice transformation. Slick seems like a good dude too.

[@hulanbailey5219]

MAN what A Shine ! BRAVO ‼

[@Rosiesgrandad]

That truck looks awesome. Great job, guys.

[@JDLR956]

She's lovely. Kick ass job guys!

[@kb9oak749]

Looks like a good 20+ years of deferred maintenance in 1 video. Nice!

[@jamessr79]

She looks and sounds great. You guys are doing a great job.

[@SpeedBumpGarage]

I had a 235 powered 55 Belair with that carburetor. It had a tube that went down and sucked heat from the exhaust manifold. Great video as always

[@steveperyer4850]

Oh yeah! A morning with Morske, and an evening with Puddin! A 2 for one day, so it don’t get much better! You did a masterful job on getting a stubborn old truck running right. It is a shame, but you see it more and more that some parts are very difficult to find for the older vehicles. Slick did his big time shine up, and when you both get ready done, she will be a sweet going to town rig, for his family to enjoy. Great job Guys! Merry Christmas 🎄🎅☃️❄️🌨️🙏🏻⛪️😊

[@CAROLDDISCOVER-2025]

A very creative forklift idea. Hey those hubcaps match the horn button on the steering wheel pretty well. You just have to love that starter plunger on the floor. Classic truck rescue you tube Rick good parts and info source 50's trucks GM.

[@trippenflippen7181]

Finally something good to watch...

[@markblackburn8685]

Should do a show, show how Slick brings the color back in the paint. Wow that looks really nice

[@vipersyl]

PUDDIN TIME!!!!!!! LETS GOOOOOOOOOOOO!!!!!!!

[@icmn316]

Old-school Buick Riviera center caps is what you have there and nice ones at that

[@christophergreen2328]

Truck is turning really nice, kinda like the caps, sorta matches the steering wheel cap. Definitely caught the quick glance on the 61 Brookwood wagon, can't wait for that.

[@joelmason8464]

Awesome truck I love old beautiful real metal trucks

[@kajuncourier]

Awesome 58 Apache,sweet looking truck. I would take her in a heart beat. Appreciate you helping Slick's family. Big heart Puddin. Man upstairs got gold stars on your record,he knows how you roll.

[@andrewcheff4035]

Beautiful truck!!

[@StirlingLighthouse]

Puddin always shows up when I need a life brake. Thanks buddy 👍

[@KristerRehn]

Yeeeeayyyy!!! Tuesday evening! Have no fear, Puddin is here😁😁😁

[@gmray7301]

I love this truck and your generosity!

[@Mister006]

I mean, I know you're not especially good with the power washer, but you make it work as its own segment! Hilarious! 🤣Taco Boy! That's half the battle! You guys did a fantastic job, it's a beauty!

[@vic745]

Looks good sounds good 👍🏼 great job boys 👌

[@robertbiggs4934]

Nice work! She'll definitely meet the requirements of being road worthy. Thanks for sharing!

[@alangovan1852]

That truck just looks absolutely amazing what a great job youse have done on it , keep up the fantastic content puddin

[@charlesmiddleton3247]

That's a hum-dinger of a beauty! Miss my "60" Chevy Apache-10 P.U. Awesome job Puddin:-)

[@dougmcknight1024]

These videos are so great. Pressure washing never gets old. Slick throwing it and you catching it off angle is too funny. I couldn't imaging doing all of the mechanic-ing you do - let alone the researching, filming and editing and a hilarious explanatory running commentary.

[@kenclark6614]

Yes truck looking good, great video as usual.

[@Treystra]

I think it's so funny, out of all your trucks you put your small econ-O-box towrolla through way more abuse than anything else! lmao love the content and the truck turned out great!

[@letsdothis9063]

I've killed a Corolla. She didn't go down easy, I'll tell you that.

[@slotterhauze]

I look forward to Monday's to see my BS meter go haywire!!! Keep up the great work. As always great entertainment!!!!!

[@bobadam7021]

I love that truck. I never wanted to own an old truck as much as I want that one. So clean. You guys did great work.

[@marcybatten1017]

Thank Ya Kindly Mr. Puddin, For Another Fantastic Video!!! That Truck Defines Awesome!!! Prayers To Mama Bear And The Cubs!!! You Got A Big Family Out Here Praying And Rooting For You!!! Hey .... What Is High In The The Middle And Round At Both Ends?????? O -HI- O , And Thats Where We're From, Keep On Rockin' It.....LOL ...You Know We Watched The Video, Love Peace, And Chicken Grease!!! Steve And Marcy!

[@campbecw]

Here we go with another good one!!

[@richardmcginnis5344]

i had a 66, half ton it was darker blue. but i sold it to my sister i shoulda kept it. that is a lovely truck i love the turquoise blue it sets it off right

[@gcrauwels941]

I really would love to find one of these in such good shape.

[@Hammbone511]

Love the channel. Best part of my Mondays.

[@ralphbalde5224]

Those s10 hubcaps look good on the Apache. That whole truck looks great. Very nice job. Looking forward to wagon next week!

[@OldsmobileCutlass1969Va]

And people will think those caps are factory. I have a few Oldsmobile 88's and they all came with 14" steel wheels and wire hubcaps... I swapped out the wheels from a 1994 Silhouette (15" aluminum) and everyone thinks they were a factory option!

[@1975napier]

Hubcaps match the horn button, l like it.

[@DoonerF]

You guys did a hell of a job on that baby! She is looking good. I’d drive the hell out of her. She’s a sweet going to town rig. ❤

[@badvoltron]

Vice grip fork lift towrolla FTW!!!

[@24Garland]

Damn Puddin, you've run into every problem that you could have with that truck.

[@OldsmobileCutlass1969Va]

At least the radiator was still solid! Sometimes they can develop a pin hole leak in a solder joint.

[@donovanhowardmusic]

Really love this truck. I think I like it better without caps at all. Love that color too.

[@KiwiStag74]

That is one good looking truck, mate. Her blue and white paint job really works well and the white wheels and white walls just set her off. All that work - it's got to make you feel good moving her around under her own steam (and stopping!) when she was in such a state when she first rolled off the trailer. Yeah - finding parts for the old beasts (especially something like the original) isn't as easy as it was 20 years ago, but they will be out there.....although it stands to reason why people have thrown brakes, spindles, rear ends etc off later model vehicles into them just to keep them on the road. Like you, I'd drive the tyres off of the beast just as she is. A vehicle like that - and especially being so original - she needs to be out and about and seen for the gem she is. Great work, mate. Hope you find the parts you need to finish her soon. All the best.

[@Rollormotor]

Oh yes, cant wait for the 61 wagon, the 58 Apache is looking sweet, looking forward to the oil and brake leak repair video and then the family reveal.

[@jjryansea]

Besides all the humor, your ingenious workarounds, (slop out of the distributor) are some of my favorite repairs you do. Thank you. Also love when your emotions get the best of you and you don’t try to hide it.

[@jjryansea]

@@Robrt32 to paraphrase the opening on nearly every video on the first channel, “.....they’re just having fun. It may not be for you buddy”

[@shanesine6639]

Truck looks amazing guys!!

[@777Timberwolf]

B.E.A.UTILFUL truck you got there, looking forward on the return to Slick's family. That'll be Slick's Christmas gift to his Family. Great Job Mr. Puddin' and Slick's polishing work.

[@richardbates2367]

I love it as a long bed sweet looking truck!!

[@randymcgee9176]

You nailed it’s amazing how you make a old truck come back to life with a lot of work thanks I’m sure he will greatly appreciate it

[@flav2534]

Thats slick as hell, them hub caps you put on match the horn EXACTY. Thats awesome

[@MichaelMaddog3584]

Great show! The R hubcap is from a Rambler American, probably mid-60s. I had 3 of them (the cars not the hubcaps) as a teenager in the mid-70s. Mostly reclaimed will-it-runs. One of them several different times. (We traded cars a lot in my group of friends.) I think my first one cost me $25.00 at the salvage yard.

[@rayward3835]

From a Rambler Scrambler, Cross Country.

[@bruceshook1781]

That truck looks fantabulous!! as far as the outside i wouldnt chang a thing.

[@SchysCraftCo.]

It’s Time for your daily dose of Puddin y’all. Wowsers this turned out beautiful. Can’t believe it. Can’t wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Fab On. Weld on. Keep Making. God bless.

[@MIKEH.777]

That truck is Beautiful, the hub caps match the horn on the steering wheel. You guys did a fantastic job on that truck I would love to buy it . Those hub caps that you took out of the bed of the truck you should clean them all up and hang them all on a wall or even make a boarder around the top of the walls with them that would be sweet to see . But keep up the great work and God Bless you and your families. 🔥💯👍👍🙏🙏🇺🇸

[@pauld3638]

Lovely truck guys. Would love that!

[@melvinnoble8552]

WOW! That truck looks AMAZING! You guys did a great job!

[@nastyn8te328]

When doing the timing with a vacuum advance u should disconnect the vacuum line in your case the hard line when turning the distributor the vacuum advance can throw off your initial timing so you're supposed to adjust it with it disconnected anyways so it would be much easier to spend the distributor with the disconnected like you should anyways

[@davidcollver6155]

I am really glad and relieved you found that set of break tools. It makes life a lot easier, especially on your knuckles. Enjoy, because I'm enjoying watching and listening to you explain everything you do. I hope your family is doing all right, take care, be safe.

[@brianandlindafairchild1237]

I'd be proud to own that truck .

[@joshuamarshe4964]

What a heck of a difference! Great work, keep ‘em coming.

[@stevee30m3]

Very nice!! Beautiful! Gratulation! Good job! ❤

[@chuckieswickedgoodfab]

Truck looks amazing!!! Great work fellas!!!! Amazing content as usual.

[@markelliott6370]

I love this rig. Wish we had em in Australia

[@billstreber5194]

This truck without a doubt is my top rescue Love those old Chevy pickups and this one seems to be in fantastic shape perfect candidate for a complete restoration Don't get me wrong I would drive the wheels off of it right now lol Great job you guys