Abaqus CFD Tutorial Part 1: Defining Pipe Geometry

Рет қаралды 69,913

Күн бұрын

Пікірлер: 18

@minli-u5k Жыл бұрын

Thank you for your video. I want to know how to import pressure field into abaqus in Ansys Fluent. I want to do pressure coupling analysis, thank you

@MessaoudiKhaled 7 жыл бұрын

please we need a tuto which treated the multiphase flow please!!! and thanks in advance for this tuto!!!

@kinchitsoni 6 жыл бұрын

At 03:25, you created circle geometry in x-z plane. But in my case i'm only able draw it in x-y plane. Please help in this situation. And in many steps you following directly commands, which is very difficult to understand for the beginners. If possible could you please elaborate each steps while going through modeling? Thank you.

@helpSpaceMATLAB 6 жыл бұрын

Hi Kinchit. If you define a 3D swept solid from the Create Part dialogue, then Abaqus/CAE will make you draw the sweep path on the X-Y plane. After you've created the sweep path and you select "Done", Abaqus asks you to sketch the solid section for the sweep operation. This will always be perpendicular to the sketch path (X-Z). Make sure you start from the Create Part dialogue-creating a sketch from another context might not give you the same options.

@kinchitsoni 6 жыл бұрын

@@helpSpaceMATLAB thanks a lot for your reply!👍

@mayarmayura5614 10 жыл бұрын

Thank you for this nice tutorial keep in progress please

@logicalwolf8877 8 жыл бұрын

Thanks for the video but when creating a new section there's a option to choose category where you choose fluid but in my case all the other options are available to select except fluid. Why fluid option is not available?

@SamFred93 9 жыл бұрын

Thank you very much for this tutorial, very impressive and detailed explanation. I have one question if you don't mind, isn't the water density supposed to be in tonne/mm3 which should be written like this: 1.10231131092e-9 rather than 1000 kg/m3. This is of course because you have used 'mm' as the unit in creating the parts. Similarly for the Dynamic Viscosity which should be in 'MPa. second'.

@learner6858 6 жыл бұрын

Thank you for the video. But, is there a way in abaqus CAE that one can generate the fluid domain directly from solid domain ? In fluent , you can directly obtain fluid domain from solid domain just by subtracting solid domain from entire volume ?

@edoardofiorani836 8 жыл бұрын

Nice tutorial could you share your input decks?

@tarekfederista1198 8 жыл бұрын

Could you upload the design you used it please

@salem7627 9 жыл бұрын

hello... thank you for your video..and please let me know the way.. At 3.08 (minute), how can you change the drawing plane from X-Y to X-Z?? Thank you so much!!

@helpSpaceMATLAB 9 жыл бұрын

salem Once you've finished the sketch, click "Done" in the prompt area or mouse button 2 and the sketcher will automatically change orientation for the sweep section.