Abaqus Explicit:Heat Generation Due to Contact Friction

[@AJ13196]

Great tutorial again. Every step was clearly explained. Kudos

[@parthsas2085]

Thanks sir, you helped me in my final year project and provided me with a bit of information regarding abaqus.

[@ramlosaclash]

Thank you, Sir, for this great work. Very helpful indeed!

[@deva8949]

great work sir, keep doing sir. thank you very much for your clear explanation

[@rashidlaghari102]

thank you sir great work, lot of learning from your tutorial.

[@bharatipp]

thank you , a very nice video can you please include the abaqus deck also in description

[@Omeninho]

Very nice tutorial video, thanks a lot Sir! Regards

[@abaqusacumen7397]

So nice of you

[@jin28ful]

Thank you so much for this tutorial, do you have a tutorial on removing friction due to contact between surfaces ?

[@phynex5555]

Hello sir, do you have any tutorial on simulating wear mechanism between 2 bodies using archard model in abaqus?

[@RichManProgram]

Hello I needed to calculate the temperature rise due to friction for aluminium plate and nylon blocks, can you provide with theoretical methods to calculate that.

[@DeutschDreams]

I liked the video. Neat and clear

[@rishikulshrestha3128]

can we see heat generation due to hysteresis in viscoelastic material ( lets say a rubber block subjected to cyclic compression load )

[@xiaoyang2530]

Thanks very much, Sir. I have a question about the unit in this simulation. If SI (mm) is used in Abaqus, the units for conductivity and specific heat should be (mW/mm/C) and (mJ/Ton/C). So I am wondering why are you using (W/mm/C) and (J/Ton/C) in your video? Would there be any difference if using different units?

[@akshittyagi5267]

He wrote units wrongly but value is correct for conductivity. Though specific heat value is wrong that needs to be 1000 times the present value.

[@yusufabdulkadir1404]

it's usefully thanks alot for your work

[@abhishekojha3893]

Sir please help me .I want to know that how can I do frictional heat generation analysis in case of crap process

[@Kaipulla_ju]

dear sir what would my units be for specific heat and density if i were to do a 2-D Analysis

[@DeutschDreams]

Hello Sir, May I ask you if you can share how to do simulation on friction between fibers on Meso scale level.

[@sunyu7942]

hello may you explain how can calculate wear in forming process . thank you in advance

[@jithinprakash957]

Sir how can v add a lubricant film in between them

[@hakancelik458]

Hello. Did you tell her everything you've done? I can't get results.

[@khanjanjoshi4531]

Hello sir, this is very useful video. But sir when I am scaling down (i.e. in L-B-H in micrometer) the geometry then it will not show any output so can you pls suggest me what should I do for that.

[@dharanikumar8821]

your videos are very helpful for me learning abaqus -can you put the video of friction stir welding with real FSW tool .

[@niravgajera3726]

I'm also doing some work in abaqus fsw , can you help ?

[@pragyanandanbanjare193]

Thermal conductivity of aluminium is 210 W/m-K or 1460 BTU-in/hr-ft²-°F so i am not able to understand how to convert it in.... W/mm-c so that it will come 0.15 W/mm-c????? I need the thermal conductivity of H13 tool steel, literature says its 24.3 W/m-K What should i use for the model

[@ramkumar-os6lc]

sir, we are doing frictional analysis project on abaqus..can you share any links or videos for learning the basics

[@sureshnalla9439]

Sir, Iam getting this error This keyword is not available in abaqus/explicit How to resolve this

[@selim_malik]

Sir i need your help I'm mtech final year mechanical student. I'm working on frisction stir welding Can i get assistance Or guidence of u sir

[@ArrojuSanthoshKumar]

thank you for quick tutorial

[@masoodamirshami7628]

Thank you, so creative

[@ireview9658]

One shot solution portal for every problem related to Abaqus 👍 Sir, which college do you belong to???

[@raghuprem693]

Dear sir, how to add translation and rotation velocities in a single step for fsw, also please make a video regarding eulerian properties for metals. Thanks in Advance

[@akshittyagi5267]

Did you got it? Please share if yes.

[@eduardojose6347]

Hi friend, I really need your help, I need to do a friction welding simulation, but I do not know how. Please help me, it's for the master's degree.

[@selim_malik]

Sir i need your assistance

[@sayadborirri]

very good, thank you very much.

[@rajnishmishra3561]

Sir please upload tutorial video on friction stir welding...Thanks

[@ibnmohammed6328]

Hello brother can you do a video on Thermal stress analysis of a riveted lap joint by using coupled temperature displacement module. I am currently having contact problems when I try to find the thermal stress due to cooling of rivet by using coupled temperature displacement. In my message file I get these problems 1)THE ESTIMATED CONTACT FORCE ERROR IS OUTSIDE OF CONVERGENCE TOLERANCES. 2) DISP. CORRECTION TOO LARGE COMPARED TO DISP. INCREMENT 3) MAX. PENETRATION ERROR 75.1979E-12 AT NODE LEFT STRIP-1.838 OF CONTACT PAIR (ASSEMBLY_LEFT STRIP-1_LEFT STRIP HOLE SURFACE,ASSEMBLY_RIVET-1_RIVET MIDDLE SURFACE) MAX. CONTACT FORCE ERROR 1.44901E-03 AT NODE LEFT STRIP-1.21281 OF CONTACT PAIR (ASSEMBLY_LEFT STRIP-1_LEFT STRIP HOLE SURFACE,ASSEMBLY_RIVET-1_RIVET MIDDLE SURFACE) Please make a tutorial on this brother, I will be grateful to you.

[@mohamedkalifa9191]

Thank you so much

[@livethelifewithpk007]

Hi Sir, First of all i would like to thank you for this video. i have a question that to move the friction pad along the full length what changes should i make ?

[@ireview9658]

Friction pad is a fixed attachment moving in vertical direction only, it doesn't move other ways👍 Only the object/wheel moves 👍

[@akshittyagi5267]

I got only one way, that is by reducing the pressure applied on the pad. But it is not fair. Do you have any other way out. Please tell if you know.

[@otonielfernandes9485]

Very helpful tutorial sir. But were you just eating an apple 8:33 ?

[@krishnamurtisingh4618]

Dear sir can you help me on wear simulation

[@MuhammadRizwan-uc5rj]

if you got or complete to find wear simulation. please let me know on [e-mail]

[@sanketneharkar5936]

sir i am working on piezo sensor on a aluminium plate where exicitation is given by varying thermal load but i am not getting the correct procedure to do can you hep me in that please give you email id or any contact details where i can connect with you