#abaqus

[@MarufKhan-zn1qt]

Can you do a fem analysis for the rotary friction welding process please.

[@AimanZamaruddin]

What kind of material in this vdeo yaa..?

[@SumanthRemalli]

why didnt you choose jhonson cook model

[@SawanKumar-wk2pp]

Please provide the full video

[@marutidhobale3075]

Analysis is aborted because 1 nodes have dof on which velocity/displacement/acc/base motion etc. Constaints are specified simultameously. What to do plz help.

[@nicolaslutkens8854]

Look at BCs that happend when one node have 2 boundary conditions, so look at that.

[@akshittyagi5267]

Provide velocity to plates carefully. Seems you selected reference point along with the plates.

[@nicolaslutkens8854]

I try to do the same you do on vid and dont work, theres some errors that pop off; about boundary conditions.

[@nandhabalamurugan511]

the tool wont pass through the plates until you give the johnson cook damage values for both the plates.

[@NoName-qt2ly]

Can u please help me with this. I think I am applying it wrongly.

[@vasuvs4344]

Analysis is aborted because 1 nodes have dof on which velocity/displacement/acc/base motion etc. Constaints are specified simultameously. Any help?

[@arindambaruah5419]

Although I was able to simulate the process well, the temperature rise is extremely low for me. Anyone else faced a similar issue ?

[@animo3019]

Hello please send me result

[@Avinashkumar-kj7fr]

Sir. Spin welding can be simulate in ansys

[@nandhabalamurugan511]

Can you mention the material of plate and fsw stirrer

[@SawanKumar-wk2pp]

What is use of reference point 2 ??

[@muhammadipank9204]

Really well man, could you make a video Rotary Friction welding RFW, i need that one. Please brother

[@akhilaparadhi7402]

Will it possible in Ansys workbench v16.2

[@devanshujha8121]

how long did it take to get the results?

[@SawanKumar-wk2pp]

Please add audio also

[@mahmoudagour7799]

thank you so much, I need any youtube ( friction for thin film coating on titanium metal) could anyone help me.

[@didinbenhom3701]

wich method

[@PavanKumar-rn9yx]

I have done everything as you shown. But at the end when I submit the job it is saying that student edition is restricted to 1000 nodes. What should I need to change sir??

[@premkumar-cr3gn]

did you resolve this isssue sir

[@MEB158PolashKumarDeb]

You may use the crack version of abacus. Then this problem will be solved

[@AshuKumar-nt7et]

Which method ALE method? CEL method? Eulerian method? Langrangian method?

[@preethamreddy6726]

Dynamic,Temp-Disp,Explicit

[@wolferi9615]

can you share the original file? I followed the tutoral, but it cannot work.

[@Abaqus_basic]

Any model here my friend is for 5 dollars WhatsApp number 0778894272

[@LovepreetSingh-kn2wv]

@@Abaqus_basic hey mate! what's your country code?

[@Abaqus_basic]

[phone]

[@NoName-qt2ly]

@@Abaqus_basic Wrong number. This is not on whatsapp

[@Abaqus_basic]

@@NoName-qt2ly [e-mail]

[@hs-ol1eh]

Can anyone share this file of simulation

[@ankaleshpardeshi978]

An excessive temperature rate occurs in solving the heat transfer equations. This usually indicates that some elements are badly distorted or an error exists with model definition. You can check the temperature values and see if the distorted elements exist. how can i solve this

[@nicolaslutkens8854]

I have the same problem and i think its about Johnson Cook Values, because plates deformation is plastic, then the pin of the tool wont past throw the plates; but i you solve this pls tell me.

[@avezshaikh4502]

Did anyone solve this, same problem?