After watching your channel for a while, I am so relieved I got rid of my vessel a few years ago. Best to have a friend with a boat. I am happy to bring a bottle of wine !!
@Vinnie101a2 жыл бұрын
David is a cheapskate.
@Andrew-ep4kw2 жыл бұрын
One safety issue at the start of the video. Always disconnect the power line at the dock source fist. That way, there is zero chance of accidently falling in the water while holding a live plug.
@jayflaherty18922 жыл бұрын
I think I should start a support group for Braden… so much to deal with 😉🤣
@ronniebowers12412 жыл бұрын
A support group these people have millions
@jerryfrost43442 жыл бұрын
Y’all are hanging in there - no panic just getting it done one step at a time with little humor in the mix - Enjoying you sharing these adventures 👍😊
@hobie6952 жыл бұрын
Nice to see everyone laughing during stressful mechanical problems. Hope you get the problem solved soon.
@samcoop20742 жыл бұрын
Been following you for a bit. The Part 2 video of your boat tour clinched my fondness for your videos. You've a great life and family. Keep going! :))
@AdamWrightReviews2 жыл бұрын
That SeaKit looks awesome!
@Adogsmate42672 жыл бұрын
A stethoscope will help find elusive noise's Braden, plus you can listen to your bearings running, you'll know when one is off song before to much damage is done. Fair winds into 2022 Mermaid Monster.
@ThoughtfulWander2 жыл бұрын
That sea kit is pretty cool! 👍👍⚒️⚒️🔨🔨
@surthrivelife88922 жыл бұрын
Get that Diver some Cipro - STAT !!! Nasty, nasty water. This a wonderful episode that shows what Boat Life is really like :)
@michaelwiggins92522 жыл бұрын
Another great video Brooke. Just so you know what you guys are calling stuffing is called packing. They make it in different sizes and materials. I feal sorry for Braden after seeing whats floating in the water. I hope you will tell us what it turns out to be the problem.
@ABOARDMERMAIDMONSTER2 жыл бұрын
Enjoy the show! How was everyone’s holiday season?!
@ThoughtfulWander2 жыл бұрын
Had excellent time with my better half and the family! Hope yours was great Mermaid Monster crew! Be safe!
@grahamelvey48332 жыл бұрын
Nice and quiet thanks just me the Mrs and two teenager daughters, hope yours went well
@hobie6952 жыл бұрын
I am about over Covid pneumonia including a 3 week stay in the hospital, so I am anxious to have a blessed 2022. Hope your holiday season was special.
@zzzxxzzz32482 жыл бұрын
Ah , a cliff hanger to keep us in suspense ! The solution will bug me all week :-(
@dennisgrones47452 жыл бұрын
When this happens to me I turn up the radio.🤗
@MVSKOOKUM12 жыл бұрын
Boat life is stressful sometimes, it’s just not always pretty floating around. It seems right when you feel everything is okay, something mechanical happens! From down to ice makers, condensation, noises , smells lol. So true!
@garyandre51402 жыл бұрын
Good luck with you're repairs🙏
@seakitsessentials2 жыл бұрын
Nice kit!
@ABOARDMERMAIDMONSTER2 жыл бұрын
I wonder who gave it to us?! Haha 😉❤️
@deanrussell67632 жыл бұрын
One of your best, thanks
@Corvette_pilot2 жыл бұрын
Yeah! I’m definitely not jumping in that water with the floaty thingy just hanging out waiting to come stick to my face or something! lol 😂
@matthewboliver85972 жыл бұрын
My solution: turn up the stereo😀 Just kiddin…hope it is an inexpensive repair. Happy new year. Matt
@neuvella2 жыл бұрын
Thanks for another great video. Since the thumping sound goes away when you lower the RPM, your problem could be the cutless bearing. Have a very Happy and Safe New Year!
@ABOARDMERMAIDMONSTER2 жыл бұрын
True true.
@rebbuckley2 жыл бұрын
Ahh, the dreaded Scaleless Trojan fish
@MVSKOOKUM12 жыл бұрын
Hahah this comment made me chuckle 🤣
@HeavyHaulKen2 жыл бұрын
Everything mechanical will eventually fail... Looks like a good emergency kit in a nice box! Does the putty have an expiration date? Spill kits we have in trucks have fuel tank putty that is only good for a year or so...
@tubamansmom70122 жыл бұрын
Happy New Year! Flies! If you look on you tube there is a great DIY with a 2 liter bottle (although Ive done it with a smaller bottle too) and some apple cider vinegar to trap and kill the flies. It does work, I swear!
@shawnalexander80092 жыл бұрын
The stuff that you're guys just pulled out is called a packing gland That only lets a little bit of water in but not much and the reason why is to lubricate the propeller shaft Because if you do not lubricate that shaft with water it will get hot And usually you will have to pull the boat out of the water and replace the packing land if it starts to come apart
@rickytimms18512 жыл бұрын
This is so funny if you know and I know but I wont tell...ENJOY ! LMAO !!!
@Drake-ct2we2 жыл бұрын
I have a screwdriver just like that, and I never thought to use it as a nut driver. That’s a great idea. Also, it looked like your shaft had excessive axial vibrations (moving back-and-forth). You might want to look at your thrust bearing.
@bradeb32 жыл бұрын
That was a very memorable swim for sure
@jayflaherty18922 жыл бұрын
Once again you jump in…. Next I vote Brooke goes for a swim!
@HeavyHaulKen2 жыл бұрын
That water sure looked filthy! How far could you see with the flashlight? How deep was it there?
@ABOARDMERMAIDMONSTER2 жыл бұрын
💩 to you Jay
@jayflaherty18922 жыл бұрын
Lol oh really??? Ya know those batteries we have for you?? 😂
@juniinc402 жыл бұрын
Stuffing?😅 Your flax in the stuffing box looks pretty good. That sound is coming from the transmission output shaft flange...
@joetabone29022 жыл бұрын
HAPPY BELATED NEW YEAR FROM AUSTRALIA
@gebi4pejo12 жыл бұрын
Got watch out for those “White Pointers”🤢🤮🤑hope Braden wasn’t harmed in anyway!
@ABOARDMERMAIDMONSTER2 жыл бұрын
He’s A ok! And it’s Braden not Brandon but that’d be funny wouldn’t it! Haha
@gebi4pejo12 жыл бұрын
Oops 😬
@billmcgarrity12412 жыл бұрын
Good Sunday morning!! Missed y’all but this week’s news seems a bit distressing on your end. I noticed Branden mentioned a probable cause being the cutlass bearing. In the vid you removed the shaft packing but I didn’t see if you used a dial indicator on the shaft once it was removed to see if there was any excessive play. I know you had the boat on the hard last year doing the bottom and drive inspection and from the looks of the props, nothing was done at that time. Hopefully you’re in warmer climate to get pulled out to have all bearings replaced and shaft inspection. Sorry to hear the season is starting off this way for you. I know you’ll be headed into uncharted waters and want everything seaworthy. As always, thank you for a peek into your life experiences weekly and May 2022 be your best year yet!! Be safe and much ❤️!!
@michaelrhodes60332 жыл бұрын
It’s the hole in the water again, you know, the one you drop money in.
@thomasmotley56162 жыл бұрын
Looks like a "coney island whitefish". They don't bite...
@TheBigWWI2 жыл бұрын
Hudson River Whitefish. They usually swim in schools. Disgusting place to go for a swim. But you guys need a dial indicator to put on the shaft. It sounds like the flex coupling is going bad. Hope it’s not that but at least with the dial indicator you can monitor if the shaft wobble is getting worse.
@fekkim12 жыл бұрын
I lost it when I saw the condom in the water....😂
@ABOARDMERMAIDMONSTER2 жыл бұрын
Sooooo bad.
@mysticwolf28422 жыл бұрын
Hope the problem was an easy fix. Hope all on board MERMAID MONSTER had not just a MERRU CHRISTMAS but a HAPPY NEW YEAR as well.
@gregchrist50902 жыл бұрын
Well I believe it is your Port stabilizer. We shall see next week if my guess is correct. I think it is loose and when you are hit by a following sea on port it lifts the boat on the port side and causes it to shift slightly and drops down and as it adjust to compensate for the roll it has slack and makes a noise as it gets to the right position.
@ABOARDMERMAIDMONSTER2 жыл бұрын
It’s not the stabilizer, we do know that ☺️
@gregchrist50902 жыл бұрын
@@ABOARDMERMAIDMONSTER Well since this video was taken in September I hope you got it fixed
@uniesse48aurora2 жыл бұрын
Happy New year , all the best
@momorrison51882 жыл бұрын
happy new year you guys and gals also Braden please strap your dive knife to you calf easier to access in a hurry. hope your all doing well
@ronniebowers12412 жыл бұрын
It's ok just pull out another million and all will be ok
@markhancock66942 жыл бұрын
My guess is a Cutlass Bearing? Is there any movement in the shaft if you shake it? Did Brandon do that when he was under the boat in the "Condom Sea"?? That was gross!!
@flynfishak2 жыл бұрын
Going under the boat, flip that dive knife over handle down on your upper arm. Its much easier to access and replace and cut yourself free if there is web in your wheel. IF there is stuff in the wheel, the knife will get wound in it. Murphy guarantees it. Since it only happens when under changing load, you might check the oil in your reduction gear. See if there are metal flakes. Your description sounds like gear meshing noise and that gearbox has helical cut gears that take the full load under power. It would also get much quieter (4:1 reduction or thereabouts) when you bring the throttle back.
@johnfaciane17622 жыл бұрын
Hope you found the issue. Had the same issue and it was the coupling had shifted. Well Merry Christmas and Have an amazing New Year!
@Colinpark2 жыл бұрын
Was that the Red Elvis playing for the diving scene?
@GaryHardyInc2 жыл бұрын
I'd bet if Braden were put in an empty room, given a notepad & pen, and asked to create a "SeaKit" he'd come up with 90% of what's in that box... at a fraction of the cost. OOPS! Hope that wasn't a Christmas gift from Brooke. 🙃
@ABOARDMERMAIDMONSTER2 жыл бұрын
Nope. Sponsor.
@GaryHardyInc2 жыл бұрын
@@ABOARDMERMAIDMONSTER Double oops! I'm sure it's a wonderful product.
@DirtyDeedzSpeedShop2 жыл бұрын
I’m trying to identify that rare jelly fish species!
@ABOARDMERMAIDMONSTER2 жыл бұрын
😂🤣
@precogtrade90992 жыл бұрын
Good luck finding the gremlin… 🍀
@gerhardvanwaltsleben89442 жыл бұрын
Lekker man lekker
@Rancidtimes2 жыл бұрын
Watched a few episodes so far and I like the size of it.. But when I was looking around for one's that might be on sale I came across a 2011 Nordhavn 55' model and it was only 124,500 pounds or 62.25 tons fully loaded.. I liked that yours was 75 tons.. Guess I'll have to look to a larger size for that weight..?
@ABOARDMERMAIDMONSTER2 жыл бұрын
Was the one you looked at a twin engine?
@jeff1616o2 жыл бұрын
Yeah, you definitely want to keep your mouth close when in that water. 🤣🤣🤣🤣🤣
@ThoughtfulWander2 жыл бұрын
Lol that water reminds me of the water in Naples Italy lol yuck... 🤮🤮
@jonsie10832 жыл бұрын
When did you last replace the cutlass bearings?
@ABOARDMERMAIDMONSTER2 жыл бұрын
Not long ago
@bayardtaylor29902 жыл бұрын
Damm. That kit cost more than my car ,,,
@larrydicenzo38262 жыл бұрын
Yes, many times if you sleep on it you will figure it out.
@dougjohnson11992 жыл бұрын
Hi From NW Washington! Happy New Year to you, and the crew. Just a thought, but you could use a small Vaccuum cleaner to suck up the flies. I taught my daughter to use one on spiders as she is arachnaphobic, Worked well, and stopped the screaming.
@royyoung34562 жыл бұрын
If exhaust is below the water line maybe its the exhaust coming out of the water. Well its not that.
@MyTube4Utoo2 жыл бұрын
I don't think Nordhavns "break." They just, "cease to function in the desired manner." *lol*
@ABOARDMERMAIDMONSTER2 жыл бұрын
😂
@billdomb2 жыл бұрын
What was the water temp when inspecting the props?
@ABOARDMERMAIDMONSTER2 жыл бұрын
Cold. Lol
@gfroese47992 жыл бұрын
Start checking the thrust bearing
@jeff1616o2 жыл бұрын
I think you have a bushing going out..... 🤔
@robertkleiman15022 жыл бұрын
Yeah, gross. But look at it this way. Maybe, just maybe, you got the ‘gross one’ out of the way for 2022! (Maybe!) 😳yuk. Red Alfa Man
@clementgoetke23852 жыл бұрын
packing looked dry didnt see any water drip on the shaft coming out of the stuffing box thats no good
@barryholiday89982 жыл бұрын
Good thing Brooke didn’t go in the water or she might have ended up pregnant 🤭🤣
@ABOARDMERMAIDMONSTER2 жыл бұрын
🤣
@thomasbrown7822 жыл бұрын
I'm guessing cutlass bearing.......
@gjurczyc2 жыл бұрын
Dry Dock and get that shaft seal replaced. Why risk it?
@ABOARDMERMAIDMONSTER2 жыл бұрын
Cuz it doesn’t need to be replaced ☺️
@donmassey74922 жыл бұрын
Just how many showers did ya take yuck. Not sure there is enough hot water to clean that off..
@doc86832 жыл бұрын
Comment
@stevemyers20922 жыл бұрын
I guess your marriage is breaking down or you are feeling slighted - so then you mention he is wearing a woman's shirt...nice - good wife great partner - pass. i will unsubscribe due to that comment alone.
@ABOARDMERMAIDMONSTER2 жыл бұрын
Sad to see you go. Braden and I love each other so so much. We like to tease one another. He does the same thing right back at me. Maybe you don’t understand our humor. It might not be for everyone. ❤️ hopefully you stick around!!
@billmcgarrity12412 жыл бұрын
@@ABOARDMERMAIDMONSTER it seems Steve’s panties are a little too tight on his sense of humor. 🤣
@jayflaherty18922 жыл бұрын
For what it’s worth, the amount of time I’ve spent Brooke and Braden, they have a VERY healthy relationship. During this episode I was literally LOL during story time. Totally felt like I was in the conversation with them, I was thinking how well they do with each other.
@mwrcrft2 жыл бұрын
Dude went into sewage to try and fix his family's boat that is true love.