About the LTT Screwdriver…

[@DetectiveDuck787]

Every pc building channel secretly advertising this screwdriver

[@bot2k6]

Oh not just pc builders, i saw a lot of electricians saying that it's a really good screwdriver

[@DetectiveDuck787]

@@bot2k6😂proves my point

[@noneyabizz8337]

​@@bot2k6 lol, electricians buy klein

[@danielboudreaux85]

​​@@noneyabizz8337despite how popular klein is no one in any blue collar field uses the exact same brand tools, especially something as common as a screw driver, I doubt every electrician is hard pressed to have that klein Phillips head when plenty of insulated screwdrivers exist.

[@noneyabizz8337]

@danielboudreaux85 insulated, you may see wiha. If the guy is cheap, he uses Greenlee or southwire stuff. Electricians overwhelmingly use Klein, that's an absolute fact.

[@TheTrueCollector735]

“Or get a bigger ssd or something” most zach thing ive ever heard 😅

[@Z3nryu]

Because budget brawler always need more money for ssd🤣

[@ip2theking]

​@@Z3nryulol imagine getting another $50 to spend on your PC and your first thought is getting a bigger SSD instead of upgrading the GPU you were planning on getting

[@404talentnotfound]

@@ip2thekingsorry but what gpu are you buying for just 50 dollars more than your current?

[@MoonZD]

@@404talentnotfoundrx 580 to rx 5500xt

[@MoonZD]

@@404talentnotfoundrx 580 to rx 5500xt

[@nickinderrieden7630]

I bought an 18" Phillips head and magnetized the tip and it has made pc building super convenient. All of those hard to reach places are trivial now.

[@dragonkiin]

How do you magnetize the tip the easy way

[@martindelgallego5809]

Stroke it with a strong permanent magnet like 1 from a discarded speaker you can find in a Junkshop.

[@alexturnbackthearmy1907]

@@dragonkiin Or buy the magnetizer, these things are cheap, and you can magnetize and de-magnetise whatever you want.

[@vdd1001]

Yep I was building my PC and a screw almost fell under a weird crevice below my motherboard, magnetized screwdriver saved me from that annoyance

[@Amy-kh3zl]

​​@@alexturnbackthearmy1907can i magnetize myself?

[@bcraftr]

I like the fact that every money we save he assumes goes to our pc build

[@lotni]

Why do you think he assumes that?

[@DoomGuy148.]

The PC gamer mindset 🫅

[@kmcgz]

​@lotni because he said save money on a cheap screw driver and get a bigger ssd... as if the money we save on a tool should go to more PC hardware

[@lotni]

@@kmcgz Well, if you want to make the most out of your budget, it's not bad advice

[@michalsvihla1403]

I'd rather have decent tools than some cheap chinese shit.

[@eagleboyz925]

I spent like $15 on an iFixit kit

[@Linkman8912]

Same, I might eventually buy one (llt driver) but not anytime soon, too broke for that shit

[@foserk7063]

​@Linkman8912 you can probably buy a cheaper screwdriver for better quality

[@AdamKueflef]

​@@foserk7063 As a ltt screw driver owner it's gonna be hard to find a driver of equal quality for much less cost

[@gabpeyre9065]

Its not😊

[@Linkman8912]

@@foserk7063 probably, but also it's ltt so worth???????????????????????

[@russell9995]

He makes money off the screwdriver 😂 The grind is real

[@ChristopherYeeMon]

This is accurate. I almost bought it then saw the price. The Fantiiks motorized screwdriver is only $50 and has way more bits

[@phuongluong7057]

Meanwhile, me chilling with my 2$ kit 💀

[@ColossalFailure-qv9jc]

Me chilling with the old ass screwdriver that is probably my grand grandpa's inheritance to my father 😭

[@charmzee8749]

I smell a 2TB Nvme 😂😂😂

[@o0Silverwolf0o]

I use an ifixit set. Honostly who needs a ratcheting screwdriver to build pc's when you can spin it in your fingers, ratchets are big and bulky making it difficult to get in tight areas.

[@charmzee8749]

They are good to have for tight spots where you can’t quite use a normal one. You can move just a tiny bit and it still works. I prefer ratcheting wrenches and screwdrivers over anything nowadays, they make things a tad faster and more convenient for all the things. You don’t need one, it’s just a comfort item for 99% of the buyers.

[@jojo_da_poe]

brett mention 🗣️🗣️🗣️

[@andrasgraff5984]

I bought a screwdriver in a random shop with the same features as the ltt one for like 7 bucks. 90% cheaper

[@Vidar93]

Huskey makes a wonderful specialty screwdriver kit for 15$ and their long and short combo standard screwdrivers with bits in the handles are what I use for work daily. Absolutely wonderful and a great price.

[@dominicaccardo8050]

the brett reference was appreciated

[@Ari_Fudu]

Zach and UFDTech is the collab we didn't know we want but we need it.

[@EraseableCrab]

I use a hart ratcheting screwdriver which is bulkier at the handle but it works just as good. And it also stores bits in the handle.

[@ravakahr]

Honestly a good business model would be to just make a ztt computer assembly set. Sell it like they do on product tear downs. I’ve had a pc building kit my parents bought me 25 years ago and I use it every week around the house. It contains a screwdriver with 40 attachments, pliers, 4 permeant screw drivers that I use a lot. And needle nose. If I could send you a photo I would.

[@NukaOrQuantum...]

Zach is trying to break the algorithm with a $70 screwdriver. Respect the hustle

[@noobstoriesyoutube-xe5uf]

That is the most popular screwdriver I have ever seen anyone use for PC building.

[@DumaPlays]

Dont watch important channels like this when being stoned or drunk. You probably hear more rgb colors than LTT. Great channel and i got my pc with tips from this channel.

[@Ayospylt]

Hey Zach love ur vids

[@howdoiplaydis8460]

I use mine every day for work. I work for a cable company. Had it for about a year and a half and it does everything I need it to do. It’s been a great screwdriver and it does some tough work

[@somebody700]

I have a set I bought 7 years ago for $14 and has every bit you need for PC and phone repair. Sure it may not be the highest quality out there, but it offers more utility at less than a quarter of the price, and it does the job perfectly right. Built several PCs with it. However, if you're building PCs for a living, then a high quality driver will make a ton of difference because it'll speed things up dramatically, and in such cases time is money so the driver pays for itself. It's really depends on your use case

[@acenewholland564]

UFD Tech the GOAT!!! Looks like a good guy to have in your neighbourhood

[@ap_jaeger6164]

A screwdriver as a conversation piece is code for "a joke of a merch". 😂😂😂😂

[@Nightshades_Facts]

Love your vids❤❤❤

[@varonick]

$70?? That's like how much my entire set up is worth

[@silverstring4046]

“It’s really only something for the true ballers”, bro just called yall broke for not having one

[@GrantSoundsGood]

Easily the one product I want advertised as much as possible that screwdriver is absolutely perfect like they got literally every single feature perfect on it. It works amazing. I've used it well over 1000 times now and it still works like the day I bought it. Nobody makes a screwdriver better than this screwdriver.

[@nottheo603]

Tbh screwdrivers are like starting equipment I’ve never seen anyone buy one you just have them

[@annieworroll4373]

I was on a tight budget and bought one anyways... It's definitely expensive, but it really is extremely good. I've seen some side by sides and it even holds up against the more expensive Snap On equivalent. And barring dropping it from a silly height(rolling off the table you're building on it can handle fine), the thing is quite sturdy, so if you're a bit clumsy as long as you're not like on a roof and drop it onto concrete it might even save some money in the long run compared to cheaper ratcheting drivers.

[@sjoerd8706]

I bought the LTT screwdriver, they released the Noctua screwdriver and bought that too :)

[@henloisiyu]

Zach's tech turf where turf stands for tutorials unboxingz reviews and fuuuunn

[@D-a-t-o-s]

Me rocking a 5€ screwdriver

[@SoftyBun]

i knew all of these tech-tubers are in labors with each other!! I bet they have a headquarters with a super computer that scours the internet for tech related things to make videos on.

[@whaddyamean99]

At first i heard $7 and thought "thats not very expensive for a screwdriver... Then i watched it again

[@possiblyflynn8445]

I almost had an aneurism when you said you didnt pay for it. Thought LTT sent you one.

[@LunarList]

Bro you can get a full i fix it kit for the same price as the ltt overpriced screwdriver

[@hink3042]

The value for money is legitimately there when you compare it to the screwdrivers it’s is actually designed to compete against

[@ZuperPotato]

we got Zach talking about screwdriver price to performance before GTA6 💀

[@Stoney_Eagle]

The screwdriver is worth it, it's really good.

[@SuperMCal]

my Matco ratcheting screw drive cost me about the same but i think the LTT one has a better way of holding spare bits

[@glamglams]

my pc was working completely fine then suddenly it said something was wrong with my cpu

[@haydenho154]

Bro just called a Milwaukee cheap .-.

[@sinful4569]

You can get a craftsmen motorized screwdriver + bits for half the price. And a good amount of ratcheting screwdrivers hold bits as well. 70$ for that is only for supporting the creator and nothing else

[@Borp56]

The only SnapOn tool I own is a ratcheting screw driver and I love that thing lol.

[@matthewferraro8020]

Even the original MegaPro driver which LTT heavily modified is a good screwdriver (the ratchet isn't AS low friction but it's still good for PCs)

[@rawr__uwu__]

He said he had control from the start 💀

[@sergeantzero9168]

LTT/ZTT 🤔

[@Hansen_pcs]

Day 12 pls recommend cable extensions and make the wall box art

[@samarthhota7375]

Fun fact That is the same sad I use

[@Frozn.12]

There’s this one that h bought a while ago called the easy tight and I think it’s works great it’s magnetic and stuff and it has a ton of sizes I’m not trying to promote it I’m just saying I think it works great

[@Im_Shadow2310]

screwdiver philips covered with epoxic resin with yellow finishes flat point made of metal

[@your_name_here-oi6zv]

The handle looks very similar to the snap-on ratcheting screwdriver

[@lblackstormoriginal]

Sri lankans when they hear LTT 😂

[@T38dy]

Nah, imma just use the screwdriver that came with my desk

[@Jrrslingshot2]

I’ve got the set that you showed

[@Gooseissmoking]

Hi got a Interesting question my CPU is 0 c / 32 f i have a i7 12700kf and a rtx 3080 and its a alinwear LOVE YOUR VIDS

[@Sgt.Shirou-no2vi]

Aint no way man said cheap then showed Milwaukee

[@Sgt.Shirou-no2vi]

In all fairness that Milwaukee driver is only bout 30 bucks rn but there's still cheaper options Milwaukee is definitely not a budget brand, and you could spend ten more dollars on a set from a cheap brand called strebito that features 2 drivers (1 precision 1 with storage in handle) both with interchangeable bits (120 different precision bits, 44 1/4 hex bits) in all the styles you'd ever encounter and plenty durable for basic electronic work ive personallly used their kit for repairing consoles phones and my laptop, aswell as useing one of the 1/4 bits in a drill to take apart a deck for repair

[@flynntaggart8549]

it's an algorithm boosting piece

[@JavierRodriguez-jq4ul]

I’m fine building my pc with my snap on tools thank you very much 😭😭😭

[@GigaGuy95]

zach rate my build i9 9900k and rtx 2080 with 32 gigs ddr4, I use my pc for gaming at 1080p.

[@dominicaccardo8050]

not that it’s relevant to the video, but i just ordered an aw2725df (360hz qdoled display) and im SO excited to get it in

[@Oroborus710]

$70 Is a lot of money for a BAD screwdriver. You get what you pay for with the LTT driver, if they lowered the price any more then they would have ZERO ROI!

[@Debauchery_Tea]

I built my first PC w a dollar tree screwdriver & used the rest of the money for a 6-pack lol

[@PandaBear97]

I got my 3 screwdrivers for PCs from an op shop. $4 total for all 3 lol

[@CrinkledSoul]

My dad with his 10+ year old wurth screwdriver doing the same exact thing

[@cecilb7927]

I put myself through college working on cars at dealerships. When I compare the price of the LTT screwdriver to what a small set of Snap-on cost, the LTT is cheap. Don't get me started on $125-200 ratchets.

[@baconstorm2259]

GF gave me one. Its fantastic, hard to justify outside of gift giving tho imo

[@CrocoDylianVT]

70 bucks for a screwdriver is crazy

[@kevinlund-up3lq]

I spent like 130 on a snap on ratcheting screw driver set

[@theoverseerknowsall6619]

I have one and honestly use my makita more.

[@santydoesreviews767]

Day 1: what a good build for 700$?

[@MemeShip.1]

Make a ZTT SCREEDRIVER 😂😂

[@noneyabizz8337]

Project farm did a review/comparison, no others are needed.

[@TheDuckMVP]

For a prebuilt PC would you say a good choice is NZXT’s player one base build?

[@Maxim_9867]

Can you recommend a 3060 ti pc build for gaming

[@bobandweave9009]

I’ll keep using my snap-on set.

[@a1henstv]

Best screwdrivers for budget: $0- your dad or neighbors random screwdriver $20-40 I fix it screwdriver $50-100 LTT

[@zwtsch]

I can't even buy it because the customs will tax it so hard💀

[@radh_XZ]

Hey Zack what does the cl30 in ram stand for

[@Decaycrazz]

Its pricy but its worth it if you can afford it, if not you are fine without

[@user-zq6rc5ht3e]

What is the best budget GPU for Ryzen 5 4600g 16gb and 650w power supply pls

[@clipsking1119]

For my gaming pc, should I get the rx 7700xt or rtx 3080 or rx 6800 in 1080p? Please make a video comparing them.

[@Really_Broke]

Yoo I bought the exact same thing for like 15€ from the local store

[@user-el5ge6xk3k]

QUESTION: should buy a amazon renewed motherboard or should I not trust renewed items?

[@SnowTheKitsune]

Glad i'm not only one who thinks LLT screw driver is to expensive.

[@Trickster-co8qm]

Hello I am from India and I have a question does your motherboard affect upgrading to windows 11

[@PaarthGupta-lw2kf]

Zach, is a hp z220 and an rx 580 good for an ultra budget build?

[@afrozajasmin513]

which gpu should i buy for free competitive fps and some AAA titles in budget pc. The ARC A750 OR THE RX 6600. (They r the same price. I cant buy more expensive) 😅 BROOO QUICKLY REPLY. IM BUYING A PC IN 7 DAYS

[@afrozajasmin513]

Bruh someone reply

[@Batsboem1]

When will the ztt screwdriver release 😂😂

[@rajinmaster]

3rd time asking Zach to review the Nvidia gtx 1650 gpu

[@123jacobe6]

W vid

[@teclishighloremasterofhoet7488]

70 dollars for a screwdriver pretty much sums up what you get from Linus these days.

[@dharmabliss867]

use the Milwaukee version next time

[@ConnorMcInerney-fk8vc]

I use a 5 dollar screwdriver kit from amazon

[@Polski_lisel]

I won't buy his screwdriver for him to make a video about a 100k pc. Screw you Linus.

[@potipots695]

16$ on a redmi ratchet screwdriver, solid imo

[@fade2black001]

You can get a screwdriver that acts and functions the same for 5 bucks

[@Walmat]

i dont think this man can say 70$ is a ton after blatantly advertising “budget” 700$ oled monitors.

[@davesway1170]

You can buy something similar for a quarter of the cost

[@AndriiVozniak]

Where is the 'paid promotion' tag