New AC Infinity T series 6" Inline Fan for grow tent
Пікірлер: 46
@lorenzomatterhorn44053 жыл бұрын
39 dislikes?....probably the competition. Great video!
@KBGgrow5 жыл бұрын
I can say the accuracy is better than I said in the video, I forgot to take the protective rubber piece off of the temp/humidity probe. Ooops
@DigitalN8v3 жыл бұрын
@18:00 are your probes close together or are they far apart..? Or different height? If probes are in different area and/or different height level they will definitely give different readings reguardless of accuracy. As hot air rises the upper probe will read higher than lower probe and depending on lighting type they can fluctuate tempurature in growing environment.. Id recommend that, if you do want the same or very close matching readings, that sensors/probes should be next together and at same level, Unless, you want to read seperate zones then I'd recommend using three sensors, one up high, upper canopy, and one at root level...and the middle one is what you base your readings off of as it is at same level as the plant.
@KBGgrow3 жыл бұрын
The ac infinity probe is humidity and temperature in one probe. The other probes are from my inkbird controller
@wolfbane47115 жыл бұрын
fantastic setup , i just oredered the 4 inch fan looking forward to setting it up :0
@KBGgrow5 жыл бұрын
Awesome, loving mine right now
@motoholyness87955 жыл бұрын
What do you think if it so far?
@KBGgrow5 жыл бұрын
@@motoholyness8795 It is working great
@motoholyness87955 жыл бұрын
@@KBGgrow I'm thinking if the s4 but I have concerns once a carbon filter is added that it will be too much stress for the fan to be able adequately cool and filter the tent
@KBGgrow5 жыл бұрын
@@motoholyness8795 The 6" fan is fully adjustable, you can turn it from a super low speed to a very high speed, no problem pulling air through the filter.
@saucedoector5 жыл бұрын
My opinion .it would be better if you install the inline fan inside the tent so it can work more efficient
@andrewoughton8543 жыл бұрын
Do you use the trigger features? Are these fans running continuously? Wondering if it’s best to keep the intake fan at 5 and the exhaust at 6 or if I will need to turn up the speed. Thanks in advance.
@KBGgrow3 жыл бұрын
Turns on and off when humidity gets to what you set it for and temp also all automatically
@alonzonino7504 Жыл бұрын
I keep mine running all the time 24/7
@LAndre28743 жыл бұрын
KGB I watched your installation video I need your help Where is the four-prong thing that goes into the control panel? Is it A Separate Piece or is it connected directly to the motor? I'm going to have to return mine I cannot find the 4 prong only 3.5 temperature sensor
@canoeshoe3 жыл бұрын
What is that wall unit that tells you the temp and humidity? (not the AC infinity one)
@KBGgrow3 жыл бұрын
Inkbird temperature and humidity
@mathquik18724 жыл бұрын
Dude I thought I have a fly in your headset at 2:40 shuueesh
@TeW33zy3 жыл бұрын
U shouldn't have to disconnect the damn motor
@Gmill3r3 жыл бұрын
You really don’t have to. It depends on the set up, I just used zip ties to hang it from the aluminum ceiling bars and I was able to also adjust them to the perfect height I needed them to be for the 6 inch exhaust opening on the side of the tent
@mrdetails3625 жыл бұрын
Sick dude.
@anthonycaprio64894 жыл бұрын
When Mode is set to "On" is there a way to manually set the fan speed without using any trigger mode settings? Just want to use this as a continuous exhaust fan but do not want it set to maximum speed (want to run at speed 5 or 6).
@KBGgrow4 жыл бұрын
Yes there is
@heno1415 жыл бұрын
hey great video ! does does come with a UK 3 pin plug or if not can it still be used over in Uk-Ireland ? And also , can you change the setting to Celsius ? Thank You!!!
@KBGgrow5 жыл бұрын
You may be able to order it with that plug. You'll have to look on the ac Infinity website. I'm sure it has Celsius and Fahrenheit
@heno1415 жыл бұрын
@@KBGgrow I ordered on amazon but yes I think I can order a plug Adapter which takes the American plug . Thanks !!
@edjedrums4 жыл бұрын
Hi marcus. Already bought 1?
@asha72444 жыл бұрын
Do You use a carbon filter with that infinity
@KBGgrow4 жыл бұрын
Yes a carbon filter for 6 inch ducting hanging in the top of the tent
@irishpatriot67964 жыл бұрын
Hey man what size would be best for 4x4
@KBGgrow3 жыл бұрын
6 inch
@scarcorleon3 жыл бұрын
@@KBGgrow how about a 3x3?
@YouTube_can_ESAD3 жыл бұрын
@@scarcorleon I am putting in a 4” AC infinity cloud line today actually but already wish I had the 6” because I could run it at slower speeds and pull just as much cfm.
@perezoso21174 жыл бұрын
What kind of heater u have?
@KBGgrow4 жыл бұрын
Just an old ceramic one with a built in fan, only use it if nighttime temps in the tent get 61 or below and shut it off at 64 degrees with an inkbird controller
@CC-jy4gr4 жыл бұрын
what do you like better now bud ink or cloud?
@KBGgrow4 жыл бұрын
I like the ac infinity because the fan is so quiet but the inkbird has its uses too, I use it for a small heater but could also be used for an air conditioner or a humidifier or dehumidifier
@greenprospecting34602 жыл бұрын
It's not that quiet it could have had a better programming...
@jesusmalverde6124 жыл бұрын
Will this replace my dehumidifier?
@KBGgrow4 жыл бұрын
it might, it would have to be taking in air in that is lower humidity
@TheJam7114 жыл бұрын
I’m not installing my T6 for a grow room. I’m installing mine in my craw space to push heat towards the coldest part of the house. Where exactly will I install my probe? I have the new one that does temperature and humidity.
@KBGgrow4 жыл бұрын
I would put the probe in the room your trying to heat warmer, set it for the temp you want to heat it too.