28- Access Remote Plants or Machines with Siemens SINEMA RC! A complete Beginner's Guide & Live Demo

[@Ind4.0]

Sounds like a great solution for remote connectivity! Thanks for sharing.

[@blociot]

Thank you for watching.

[@whynot16384]

Very good video

[@WillPark98]

Hi, I have a very similar setup. I can connect to the S615 through Sinema RC Client but it only gives me access to the IP address of the S615, not the rest of the local network with the PLC. Do you have to set up static routes on the S615 to map traffic between internal and external?

[@blociot]

Hi Will. Exactly. You need to allow traffic between internal ports and the external port. Also, you need to define the participants groups and Subnet (your PLC IP address range) on your server under Devices and Network setting.

[@WillPark98]

@blociot hi, thanks for the reply. I managed to get it working. On SINEMA RC server, I selected NAT mode 1:1 for the device and entered the IP subnet and now its working. Thanks, great video

[@blociot]

Awesome. Thanks for watching. All the best

[@eng.muntadher]

dear sir thank for your explanation but have few question :- 1- i have two projects one have (s7-315 2pn/dp ) and 2nd ( 1214 DC/DC/DC ) , which SENIMA REMOTE CONNECT SHOULD BUY , can candidate for me ( which article number i choice for my case ) 2- after purchase and already install SINEMA remote , how login , how get RC server name , RC SERVER URL , is all that information will found it with license CD copy or find it on SCALANCE S615 LAN router need more details how configure and create account on SINEMA remote connect client . i know you explain very good but some configration are not clarified like how create account , and how configure SCALANCE S615 LAN . hope can help me with my issue . regards .

[@blociot]

Thank you for watching. I wanted to create a video for configurations, but I noticed Siemens already has two videos for them. Please watch this video for server configurations: kzbin.info/www/bejne/g3OQdJqImLScbLcfeature=shared and this video for the client configurations: kzbin.info/www/bejne/qJe5loFmadyoY5ofeature=shared I hope this helps.

[@eng.muntadher]

@@blociot big thanks for your help 🥰😃😃

[@blociot]

@@eng.muntadher Good luck with your project

[@christiancastillo1887]

So for this solution you installed the SRC in a Virtual machine in the cloud, right?

[@blociot]

Hi Christian. Yes. It's in a cloud VM. There is a documentation for installing SRC on AWS. Same applies for other clouds. Overall, the installation is straighforward.