Accsoon CineView HE & Quad: Cost-Effective & Beginner Friendly!

The Accsoon CineView HE and CineView Quad are perfect for live streaming and on-set monitoring, as they allow you to send a 1080p60 camera signal to the included receiver, as well as three mobile devices. These versatile wireless video transmission systems provide a cost-effective way of allowing four people on set to monitor an HDMI camera signal. You can transmit to any mix of up to four receivers and iOS/Android smartphones and tablets using dual-band wireless signals.
Order the Accsoon CineView HE Multi-Spectrum Wireless Video Transmission System at B&H: bhpho.to/3OW15GT
Order the Accsoon CineView Quad Multi-Spectrum Wireless Video Transmission System at B&H: bhpho.to/39xdZe1
Shop @ B&H:
www.bhphotovid...
Subscribe to the B&H Photo KZbin Channel
- bit.ly/Subscrib...
Head to our B&H Event Space KZbin channel for more seminars! bhpho.to/BHEve...
Follow us on Social Media
- / bhphoto
- / bhphoto
- / bhphoto
- / bhphotovideo
#Accsoon #FilmmakingGear

[@BandH]

What are your thoughts on these wireless video transmission systems?

[@chrismsisya]

Is this good for livestreaming Like connecting to atem min pro?

[@skymakai]

Very nice review! Looks like they're all out of stock!

[@ChanninHesapene]

Is this system capable of viewing multiple Accsoon TX’s on the Accsoon Cineview App at the same time?

[@CrabappleKing]

Will this work as an OBS Studio input?

[@BandH]

the Accsoon CineView HE model does have USB/UVC output for streaming

[@clkxb1]

I am installing this in an event center that is 163 feet by 95 feet wide, connected to that room is an IT room and in that room is the connections to both projectors that are installed in the event room, what i would like to do is be able to connect a laptop anywhere in the event space to the transmitter, and send the signal back to the IT room where the projectors are connected. will this work with what i am trying to do?

[@DC-pt1zr]

Curious about this too. @BandH any idea if something like this would work?

[@abd21karimabdelkarim74]

Hi! Can i pair a cineeye 2spro transmitter with a cineview HE receiver

[@BandH]

Yes, The Accsoon CineView HE has very similar specifications to the Pro 2 in a more compact solution. Please note that HDMI is only supported.

[@ekphotography]

I just got mine and I bought an Ipad 6 generation just for my clients to monitor bc from all the videos I have seen it seemed to work pretty great, but on my iPad there is a lot of LAG and kind of jittery even from 10 feet away? even on Speed setting over HD, is there something I am missing or an do to improve it?

[@BandH]

Try a "Network Reset". On the transmitter: Access the" Network Reset" menu. Press the menu button to enter “Network Reset” → Select “Yes” → Press the menu button to confirm → Select “Yes” → Press the menu button to reboot. The SSID and password of the 5G WiFi will be reset to factory settings. Note: CineView HE has two WiFi signals, one is 2.4G and another is 5G. Please confirm that the mobile devices are connected to “Accsoon_****" 1. Please be sure to update the firmware. Please ensure that your mobile devices can access the Internet via WiFi. Open the Accsoon Go App, select “CineView'', then tap the “Firmware Update" button. The App will automatically search for the latest firmware update on the server. Once a new firmware is available, tap “Download" to download the latest firmware to your phone. 2. Update: Once the new firmware has been downloaded, connect your mobile devices to the CineView HE → Tap “Next” on Accsoon Go App to update. Note: 1. Make sure the battery level of CineView HE is above 50% before updating. 2. No power cuts should occur during the upgrade process. 3. The CineView HE will reboot automatically when the update is complete. 4. If you have any questions during firmware update, please refer to “Accsoon Go App Tutorial - Firmware update” video on Accsoon's official KZbin channel. If these tips do not remedy the issue, please contact us:[e-mail] >Mark

[@ekphotography]

@@BandH Thank you very much for answering, I have tried pretty much all those steps, but when I click on firmware after a few seconds it pops up, you are not connected to the internet ? what I do not understand and think maybe the problem, if I am connected via wifi to the Accsoon, how is my iPhone all to be connected to wifi at the same time? And I have 4G iPhone , so I should not have to be connected to wifi? I have tried 10 times, if I have my wifi connected to my phone, it says I need to be connected to the transmitter and when I connect to it it then says please check your network? What the heck?

[@ekphotography]

PS> Finally got it , thanks, You have to connect to wifi first then when the app says connect to device you have to, while keep the app open, then connect to the device when it asks... But it finally worked and updated in about 10 seconds... Not sure what improvements have been made but I am wondering why so many report that transmitting to an apple decide usually has less lag but mine is pretty terrible when connecting to an iPad from 5 feet away.. any suggestions on how to improve this? it is almost non useable. I have an iPad version 6