Acer Aspire 5738 - Disassembly and cleaning

[@zirak93]

Thanks a lot man!. But I would really appreciate if you could also show how to assemble the computer once you have cleaned the fan. I know it's pretty obvious, but it's a bit annoying that you have to skip the whole video backwards to do it very correctly. After spending 3-4 hours to disassemble and assemble the whole computer I finally managed to clean the inside. Obviously it have worked since the computer is faster and according to core temp. the temperature have decreased from ca. 70 Celsius to 30-40 Celsius, which is a decrease with 30-40 degrees which is pretty good. Again thanks a lot. This helped me even if I didn't had the right tool. :P PS! I highly recommend anyone to unscrew the screw around the cover of the fan and clean inside with a box with compressed air. This helps a lot. I had much dust inside which one couldn't clean by just spraying on the fan on the outside. :) That's a tip from me. :) Another tip is if you go the cheap way, use the edge of a screw to get the white chips which is holding the white and the red cables (07:44).

[@mukeshverma2786]

Very very helpful video I cleans fan of my lappy by the help of video Finally 5 screws are left dont know from wher😂

[@ferryicker7554]

Thanks a lot. my old laptop is running again, Now its time to use linux with my old fast Laptop ;-)

[@yo.izho46]

Does Linux makes aspire fast again?

[@shinposting]

depends on what you intend to use it for but generally speaking yes, it does

[@nielsgrote]

i hate the ing´s who designed this laptop ! ! ! hard work to clean the fan ;-) THX for this video ! ! !

[@zirak93]

I know right. I used 3-4 hours to disassemble and assemble the whole computer. That's not a joke. :P

[@evangmu8082]

All is well, there is thermal issues with this laptop, graphic chip has to be reflowed, shouldn't you clean the fan?

[@ivangroznica725]

Staubsauger einschalten und vor dem Staubsauger, mit pinsel den Ventilator von der CPU putzen.

[@nflehnen]

TKS

[@fltunow]

Good video

[@milolomi5600]

I need this screwdriver... I have those with the spinning top, metal handle (always swiping in my fingers and it hurts) and its a little blue box with a kit of those screwdrivers ...

[@evangmu8082]

There are smal magnets inside HDD 2.5 in drives, you kan use...

[@talismancentury7535]

What model version number is it (vga ati/amd)? Along side with (vga_2 intel) gma 4500hd. The hdmi intel or ati/amd? From acer hardware detectation tool. Thank you for your efforts in this video.

[@TheBoostedDoge]

Is it possible to remove the cover without taking of the screw at the end of the L HDD cover, I'm servicing one, but the client rounded the screw now I can't take it off

[@jsoe23]

does it support dual channel for RAM? I cant see it so good

[@zirak93]

Yeah, I think so. At least my model support two channel for RAM.

[@breaKKwave23]

Yes

[@johnckodrw4913]

Cum se schimba pilula baterie pentru a menține ora.....?.

[@wanderlusttravellers1010]

Does Acer 5738 supports 16gb ram? And i3 processor?

[@sohamprajapati1068]

I have also this question

[@paulmcstay4617]

@@sohamprajapati1068 No

[@allendaniel7720]

No. max 8gb ram (2x4gb ddr3). No for the i3 processor.

[@อนันต์กิจรุ่ง]

@@allendaniel7720เอเชอร์5738zGใช้ แรมDDr3ตัวละสี่กิ๊กสองตัวหรือครับ

[@eacruz108]

where does the bluetooth module go?? thanks

[@PSYCHVlogs]

Is wifi and Bluetooth card same here

[@vionom2627]

Can I disassemble the keyboard without removing the screws?

[@vinigame7490]

Yes

[@sohamprajapati1068]

I can use core i3 processor in my acer aspire 5738?

[@vinodmane4824]

No

[@breaKKwave23]

You can only use the processors of Core2Duo only like core2quad extreme

[@อนันต์กิจรุ่ง]

แรมชนิดอะไรครับ

[@xanienam6511]

errhhgg i badly wanna clean my laptoppppp!! full w dirtssss

[@alabama1974]

thanks, is this pure copper on cpu and gpu? I want to put liquid metal paste.

[@NotebookCenterTV]

Yes it is copper. You should put thermal grease.

[@alabama1974]

Notebook-Center why? I want better cooling, lower noise

[@michaelbrandonsienes5350]

Sir need help i cleaned my laptop the same way you did step by step then the screen turned something red but still have display.

[@NotebookCenterTV]

You should checkk all cable connectors.

[@vinigame7490]

Ich bin so dumm.... Ich dachte, ich müsste meinen Laptop zur Reparatur bringen, weil ich nicht wusste, dass man die Tastatur abnehmen kann🤦‍♂️🤦‍♂️🤦‍♂️

[@PoseidonDiver]

damn this has to be the worst laptop to disassemble

[@Adityapade12]

This is so old laptop so it is wrost in 2020 but it was best in 2010

[@PoseidonDiver]

@@Adityapade12 my brothers just died after 10 years. Took it apart to re-use all the bits. I cant believe how complicated they made things

[@Adityapade12]

@@PoseidonDiver are you talking about your laptop of Acer ? Although it's totally depend on our use

[@breaKKwave23]

@@Adityapade12 Exactly

[@breaKKwave23]

@@Adityapade12 Yes bro

[@redCrambler]

Hi, I have one of these laptops but it was destroyed in a flood. However, I did manage to salvage the touch screen. I bought a LVDC driver board and the display is perfect. So I want to use it with my raspberry pi 3 and I want to be able to use the touchscreen function. Can anyone tell me how I can get the touchscreen to work? I assumed that it would just be a case of connecting the touchscreen to a usb cable and then plugging that into my RPI3 USB port but I can’t find the touchscreen connection. I’d appreciate any help from you. Thank you in advance.

[@r2r051]

I hope cleaning helps me turn it on its been stored in my old house for many years

[@kaanferikel]

did it work

[@r2r051]

@@kaanferikel yes using it now without batteries (the one in the motherboard and the one for the laptop). Laptop turns on automatically when plugged in and turns off as it should. At least I have pc to study. Ill take it to proper tech service once the virus is gone. The keyboard is also damaged its like crazy ghost, so I disconected it and use external keyboard

[@breaKKwave23]

@@r2r051 bro don't give your laptop to any technician you just send it to service center of acer

[@deleon777aj3]

I have a problem crewing the last bolt in the left where the panel the hard drive is located what type of scew did u use for it?