Acer Nitro 5 i5 9300H Undervolt, Undervolt almost any laptop using ThrottleStop.

[@unboxvibes2581]

Hello guys, please watch my new comparison video kzbin.info/www/bejne/oV7IgXqpqp2boNk GTX 950m vs GTX 1650 (laptop) in 2020

[@unboxvibes2581]

Checkout my game test after undervolting the cpu and overclocking the gpu kzbin.info/www/bejne/jnitnIeQaMeVmK8

[@nico._lombana]

Thank you so much, my games are going smooth af and with no more than 80° , wish I could buy you a coffee or something :p

[@mudrad1930]

Rather make coffee on your cpu😂

[@dworkforever]

Set it to -150 for the same specs as you i think it bluescreened so i set it to -100 and it works thank you still works today!

[@axelravanello7914]

Mine too

[@jeogaming9480]

thank you very much .. i undervolted -140mV and my laptop word perfectly

[@unboxvibes2581]

you're welcome

[@frogcrush8518]

Which model do you have?

[@jeogaming9480]

@@frogcrush8518 lenovo legion y540 i59300h gtx 1650

[@SR-kb4si]

@@jeogaming9480 I had my 9300h undervolted to -135 and it was stable for a for days *UNTIL* I ran an AVX workload. Be sure to stress test with AVX as well

[@Tenchi707]

Same

[@eblanueblanovich8902]

Thank you so much bro, cpu temp was 90 now it is 65-70

[@mohamedsewilam4134]

Thx man i have an acer nitro 5 an517 with 1650 and i5 9300h i undervolted and noticed that even though my power limits throttle is still there but the speed is actually higher than it used to be

[@unboxvibes2581]

you're welcome

[@MachSpeed2.3]

Saved my life man, gj on the tut!

[@grzegorzsobon6909]

Those are also best settings for me Acer aspire 7 i5 9300h GTX 1650 ti gddr6 16gb ram every game right now 78°- 82° max and 3.7ghz everything works just perfect

[@youknowwhoalready]

3.7ghz for i5 9300h us actually low.... I have i5 8300h and after undervolting (-150 mv) it still runs at 3.8 ghz and temps below 80 ( i have a Rog gl503ge)

[@grzegorzsobon6909]

@@youknowwhoalready can do 4 GHz but I set it lower to get 76° if it's on 4ghz all the time temperature is 82°-85° so it's kind a benefit for me...

[@vigneshkumar8266]

@@grzegorzsobon6909 bro I'm using same aspire 7 i5 9300h ..1650ti Can u tell what the value for lowering temperature without any issues in this model ?

[@grzegorzsobon6909]

@@vigneshkumar8266 I'm setting (-135mv ) core and cache And clocks 1- x37 2- x37 3- x36 4- x36 Let me know is it works for you

[@vigneshkumar8266]

@@grzegorzsobon6909 this didn't cause any issue on all games ? And tell ...what Turbo boost power and Turbo boost short max power limit ..U Using ?

[@firmanghani3376]

the IccMax in your cpu core and cache is different, you did that or is just there by default?

[@macandcheese1039]

155 gave me a bsod, so im probably gonna change, good video regardless

[@mr.tonkabean5829]

U are my hero!!!

[@Tenchi707]

Noice my man!

[@Fattah_yh]

Yo bro can i put the power mode to high performance or ultra performance mode while undervolting using throttlestop? Pls answer

[@varun_4125]

Thanks man, I have Acer Nitro 5 i5-9300h and -150mv is stable for me according to TS Bench. Can you tell any other tests to confirm its stability?

[@unboxvibes2581]

U can try cpu-z cpu stress test, search it in google, if your laptop is ok then it means that ur undervolt is stable

[@Pawelo0301]

You can UV Intelt GPU by the same voltage

[@fmeza0]

Thank you! you helped me a lot. btw Is it normal that ts bench gives me less time after undervolting?

[@unboxvibes2581]

Yes, it can be affected from ur undervolts. Thanks for watching 🙂

[@lorenzo_levrero]

My changes don't apply :/ any advice?

[@SinX4Lyfe]

Going to be following this video as well as use new thermal paste when my computer arrives got it for 570$ on amazon.

[@unboxvibes2581]

Wow you got it cheaper than mine lol..

[@SinX4Lyfe]

@@unboxvibes2581 lol changed my mind and went for quality... got an Aero 15 with gtx 1660ti on sale on Amazon for $1499 OK price I heard but I could afford it.

[@failure705]

@@SinX4Lyfe that's a RIP off try an hp pavilion 15t (gaming)

[@vonlouistualla4601]

Why is my FIVR control locked? how to fix it

[@rrrr9195]

Thanks for the tutorial

[@josha7620]

whats your TPL settings? please reply I need help, I don't know whats the default tpl settings of 9300h, I changed it and now im getting bluescreens

[@unboxvibes2581]

I think you shouldn't change the TPL settings if your laptop bios doesn't support it, the default set it according to the laptop tdp which is 45 Watt for both pl1 and pl2

[@danielchang6914]

Hi, I've got the same model laptop, but the 2020 model with the 10300H processor, and when I launch ThrottleStop and go into the FIVR Control menu after changing the Speed Shift EPP as per your instructions, I am noticing that my CPU Core, CPU Cache, Intel GPU section (middle top box), it is all greyed out and I am unable to choose anything. How do you overcome this? Thanks

[@unboxvibes2581]

I think this feature is disabled for 10th gen above

[@bbgorl7470]

@@unboxvibes2581 i have i5 9300h i'm facing the same problem

[@olipwithluv8496]

why after i save the undervolt config the offset still at 0? i have no idea what to do

[@wisequigon]

check if Virtualisation (it apears in task manager) is Enabled, you have to disable it from Bios, delete de config file near the .exe and try again

[@sirshaganguly7706]

What exactly is iccmax Mine is set at a higher value for both cpu and cache

[@dhruvpathak9947]

Should I do the exact same steps for acer predator helios 300 i5 9300 h 1660ti?i get temp of upto 91 92c while playing fn, can you suggest the values I should use? It was by default -. 125 v out of the box, so suggest some values?

[@unboxvibes2581]

I think you can try it by adding the undervolt gradually until u get the best result. If ur PC crash and restart, it means that u have reach the maximum ammount of undervolting.

[@undyingeye]

@@unboxvibes2581 Vibing

[@redeye-2200]

For an i5 9300h and rtx 2060, how much should i undervolt?

[@unboxvibes2581]

you can try to undervolt your cpu with -100mv value, because almost all processor capable of doing it. but if u r an advanced user you can try increasing the value and find the stable spot.

[@jackcashman1257]

135 is working for me

[@Magic_racoon69]

Hey how much do i gotta undervolti have an 1660ti and an i5 9300h and a other thing is does undervolting fix stutters cuz i fixed the ram issuebut i keep having stuttersin game its really annoying

[@kishorepandian4500]

i have the same laptop but my problem is 1.if i plugged in and run stress test i get thermal throttling and power throttling immediatly 2.if it is not plugged in i dont have either of the throttling but current throttling DO you have any idea?thanks

[@kishorepandian4500]

i had the same problem try downloading throttle stop and tick the disable turbo option

[@Flymonster0953]

For me its locked i cant undervolt it

[@markangelokeyser7307]

i have a question. though i didnt not encounter any errors on my ts benchmark but my benchmark is high as 23.006. why is it some got 10 mine is a little bit higher. thanks.

[@unboxvibes2581]

That's actually good, because every cpu has its own capabilities (even for the same CPUs)

[@PrCaLeK090]

I have hp omen 15 with i5 9300h and with -135mV is not stable. I using XTU. How do you set to -150 mV and running stable? Thanks

[@unboxvibes2581]

Sorry for late reply, like i said it depends on each manufacturer and laptop, it can be different even for different laptops from one manufacturer

[@frogcrush8518]

I have a nitro 5 2060 144hz 9300 i5 with 16gb any recommendations

[@unboxvibes2581]

Undervolt -100mv at first try. Almost all CPU can handle this value.

[@glennielsen]

@@unboxvibes2581 I have a 9300h Acer Nitro, I just followed your instructions to a T (-155.3) and it didnt crash during the stress test, it did however report 4 errors..what does that mean? is everything okay you think?> should I try -100 like you recommended to him?

[@unboxvibes2581]

To test the stability, you need to try further in day to day use. In my case i try to play Heavy games (try Battlefield 5 or other CPU bound games) at least for 30min - 1 hour or you can also test it in stress test like in AIDA 64 for 30min. Because sometimes the system needs to be tested in heavy task for certain time to check the STABILiTY.

[@frogcrush8518]

@@unboxvibes2581 does these setting save even when shutting down laptop?

[@unboxvibes2581]

no, you need to re run the program every time you start the computer

[@odgallerojr]

Hi I've changed my Undervolt settings to -125 but when i Play heavy games my Temps are still between 85-94 deg. I recently repasted also my cpu and gpu with kryonaut. What should I do?

[@odgallerojr]

I also have the same specs of Nitro 5

[@s1mo]

bru get a laptop cooler and increase fan speed to 80-90% only where you need it

[@Bilalraza12]

bro my disable turbo auto ticked, when i tried to unchecked it turns into blue screen of death with whea uncorrectable error

[@unboxvibes2581]

It could be your motherboard or cpu

[@riotthomas5504]

Hi! i UV at -120mv on acer nitro 5 i5 9300h & gtx1650 but it make crash my game when i play cod warzone, its the only game who do that. Any solution ?

[@user-ej1yx4rw3y]

lower it

[@durbarmandal4714]

Do u have a discord channel or any where i can talk with u i need to under volt my laptop but want to know is it risky and what are troubleshotting i need as i got this laptop after 1 year of seeing it

[@unboxvibes2581]

No sorry man

[@lsd3322]

Good vid but u know why it doesn't apply the voltage after i hit apply? I tried deleting the ini config file but it didn't work

[@unboxvibes2581]

It could be locked from your laptop's bios

[@lsd3322]

@@unboxvibes2581 true, I ask in the ts forum and the guy told me it was locked

[@zferct]

Bro the temperatures in the nitrosense were sometimes up to 71 ° C, not if it is not calibrated with the undervolt but it was worrying to see those temperatures in the nitrosense without doing almost anything just doing normal things being on google Tell me the nitrosense is not calibrated and gives different temperatures?

[@unboxvibes2581]

You can check your temperature using other programs, such as hwmonitor and hwinfo. These programs give the accurate temperature :)

[@nikhilharpale8639]

I have the same laptop brother...but even after undervolting it by -155.3 to -175.9 too the temperatures do not change and the cpu thermal throttles...what must be done to overcome this :)

[@unboxvibes2581]

I think it's from the manufacturer (acer), they set the pl1 and pl2 for the short and long turbo

[@janssenericpoda7470]

Can i just undervolt the cpu? not the gpu? or needed to undervolt both of them?

[@unboxvibes2581]

Yea, the CPU actually that really needs to be undervolted

[@pijehfacun7000]

hello in my hwmonitor it shows only -0.051v only is it okay? i followed all your steps

[@unboxvibes2581]

It is okay

[@teja1428]

Mine is Nitro 7 i5 9300h 1660 ti What are the best settings for this one?

[@unboxvibes2581]

I think you can try -100mv, it's stable on almost all devices i tested

[@teja1428]

@@unboxvibes2581 i have no idea about undervolting Can u give some details? Plz.

[@patrickjn]

Will undervolting reduce gaming performance?

[@unboxvibes2581]

No, if you don't undervolted too much

[@patrickjn]

@@unboxvibes2581 ok btw how to overclock instead of undervolting

[@unboxvibes2581]

@@patrickjn if u have a laptop, it is not possible, because of the power limit that laptop has. But in pc u can overclock it from bios if u have K series intel or Ryzen CPU

[@patrickjn]

@@unboxvibes2581 i have laptop :(

[@patrickjn]

How about gpu? Can you make video about overclock gpu

[@plabon7821]

I have the same laptop with same spec.. After shutting down the laptop it reset to default.. If i open throttlestop app then it works again.. Any solution?

[@adarshm305]

Use intel extreme utility.

[@unboxvibes2581]

Yeah try using XTU

[@adarshm305]

@@unboxvibes2581 What is the best voltage on XTU i can set on same i5 9300h?

[@unboxvibes2581]

You can reduce it gradually until your windows crash and restart

[@forsaken6658]

My i5-9300h speed keeps fluctuating like urs sometimes 3.3ghz sometimes 1.2ghz Is it normal ?

[@unboxvibes2581]

It's normal because cpu will drop its speed when not really needed

[@jeogaming9480]

you can change some setting in power plant ... the cpu speed stay in 4 Ghz

[@beatzzc1t]

@@jeogaming9480 that’s not healthy bud.

[@divilthakur4671]

W8 5.6k people watch this video and this is working video and subscribers r only 15 😵 🇮🇳

[@unboxvibes2581]

Thanks man for checking out my video

[@Damtrax666]

What about the performance? Today the laptop is running normally and stable? Thanks for ur explanation, nice video (y)

[@unboxvibes2581]

Yeah, i am still running it with -155 mV and it is very stable. Btw, i also changed the thermal paste with Thermal Grizzly Kryonaut, so it becomes very cool compared than before. Thanks for your comment...

[@unboxvibes2581]

Yeah undervolting will make your CPU easily boost at max speed

[@zackralph793]

I did undervolt like ur video we have same spec. My temperature goes down to max 75 but my fps drop as well -20 fps. Why??

[@unboxvibes2581]

How much did you undervolt ur cpu ?

[@zackralph793]

UV Review -150.4. Epp I set to 0. Turbo ratio limit 41 40. And turbo boost power limits 24 24 28. Temperature is getting better than before. Max is 75c but the problem is my fps in gaming drop drastically. For example game csgo was 120-144 fps as my screen 144hz. Now its running very low max 108fps and sometimes fps drop to 60fps. Any helps?

[@unboxvibes2581]

Is that only in csgo or also in other games ?

[@zackralph793]

UV Review all games. Dota 2 was 90 fps now barely to reach 70 fps

[@unboxvibes2581]

Sorry for late reply, but i think you shouldn't lower ur cpu power limit

[@EithanMcGarrity]

My acer nitro 5 won tlet me unlock adjustible voltage what the heck do I do?

[@unboxvibes2581]

What is ur cpu, intel or amd version ?

[@jayllana4625]

how to reset back coz we have same specs but i keep getting blue screen.

[@unboxvibes2581]

If an undervolt is failing it will shutdown and automatically reset to the original setting. To get the best undervolting value you need to reduce it gradually, for example you reduce 10 mv then do stress test for at least 5 minutes, repeat this step until you get the max possible undervolt

[@anshmehra7268]

bro how we can get default settings back??

[@durbarmandal4714]

I cannot install throttlestop it was showing mfc120u.dll not found

[@unboxvibes2581]

Sorry, i think it should be fixed with reinstalling directx and mscnfig

[@patrickjn]

I have i5-10300h and rtx 2060 how much should i undervolt

[@unboxvibes2581]

u should note that some undervolt is disabled in some 10th gen intel laptops. If you open throttlestop and it shows locked menu, this means it is disabled

[@patrickjn]

@@unboxvibes2581 ok but my cpu and your cpu are lne family xD

[@unboxvibes2581]

@@patrickjn try using throttlestop first. Then if u get into any problem ask me 😉

[@patrickjn]

@@unboxvibes2581 thanks for help

[@patrickjn]

@@unboxvibes2581 will undervolt reduce cpu temp

[@nickkerr6068]

What cinebench score do you get ?

[@unboxvibes2581]

814

[@nazihkhaireallah1557]

@@unboxvibes2581 i tried cinebench and i got 900 my config is legion y540 i5 9300h + gtx 1660ti and m getting less than 30 fps playing valorant still do you know what' the problem ?

[@unboxvibes2581]

@@nazihkhaireallah1557 what is your cpu Temp ?

[@nazihkhaireallah1557]

@@unboxvibes2581 45 c

[@unboxvibes2581]

@@nazihkhaireallah1557 maybe valorant is using only your integrated GPU (Intel graphics), try changing it to geforce 1660ti inside Nvidia control panel

[@justadi2273]

I'm gonna buy the same laptop so should I go for your exact same values?

[@unboxvibes2581]

Yeah maybe you can try it

[@maheshpadala4036]

This is not working i got blue screen errror and laptop start restarting continously

[@unboxvibes2581]

it is working for almost all laptop, what is your specifications ?

[@Brian-qo8kd]

Thx bro

[@mank004]

My laptop runs at 100°C while charging and playing...and 80C on battery Suggest me the mV i5 9300H + GTX 1050

[@unboxvibes2581]

Try changing your thermal paste with Thermal Grizzly Kryonaut and then undervolt -120mv

[@mank004]

@@unboxvibes2581 ok thanks 🙌😊

[@unboxvibes2581]

@@mank004 your welcome 🙂 please consider subscribing to my channel 🙏

[@TravoyFox]

Do you have discord i have same pc and setup want to know how well yours is doing thanks

[@unboxvibes2581]

No man, im so sorry

[@jeffrychristian4423]

Give me the difference with undervolt and without undervolt please

[@unboxvibes2581]

sorry for late reply, you can see the result here kzbin.info/www/bejne/rGTLnaJripd4i8k

[@fredmicayas3747]

Bro is it the same if my ram is only 8GB?

[@unboxvibes2581]

Yea, undervolting doesn't affect the ram, it affect CPU

[@fadhilarfinza5186]

i just click on apply and my laptop restart automatically, then i open the throttle app it still 0 volt but the 32 speed is already changed. how it can be?

[@unboxvibes2581]

It might be the bios version, you can try updating ur bios from acer website and update the bios to the latest version

[@fadhilarfinza5186]

@@unboxvibes2581 allright then lemme try

[@lukey3980]

Why don't you undervolt the intel gpu?

[@unboxvibes2581]

i tried to undervolt the iGPU, but it doesn't affect anything ( no changes in thermal performance)

[@shashankb1971]

Can I do this for msi gf65 i5-9300h

[@unboxvibes2581]

Of course

[@ayanmaity2605]

Bro I did -165 and it crashed and it's stuck in a bootloop

[@unboxvibes2581]

you undervolted too much. Did you run the TSBENCH everytime you increase the undervolt value

[@ayanmaity2605]

@@unboxvibes2581 yes bro I restarted and it fixed but when I kept the value at -155 core it ran fine in tsbench but after some time it automatically crashed

[@ayanmaity2605]

@@unboxvibes2581 also while running cinebench the temps go up to 95° but tsbench temp don't cross 85° on 100%

[@unboxvibes2581]

Oh in that case, please try playing games. I suggest AAA games for checkin the stability of ur undervolt (try games such as Battlefield 5 etc).

[@kevinlopes01]

When I test the undervolt the number I get is in red but the computer does not restart, is it safe if the computer keeps on during the entire test even if the result is a red number?

[@unboxvibes2581]

it is ok, just make sure the PC doesn't get blue screen, if it crashes then you need to lower the undervolt values

[@patrickjn]

Will undervolt reduce cpu temp?

[@patrickjn]

Pls can it?

[@unboxvibes2581]

Yes it can

[@patrickjn]

@@unboxvibes2581 btw why the ratio is not minus it still 0 even tho i undervolt already apply already and set to auto save voltage setting

[@unboxvibes2581]

u have to keep the throttlestop running. but for 10th gen intel cpu u must be sure that ur laptop allowed for undervolting, because some of them are locked from the BIOS

[@legoatjames7897]

Bruh this messed up my computer, making it freeze and I had to reset smh this is BS

[@jovintonpalayaban1879]

how about i5 9300 1660ti?

[@unboxvibes2581]

It's just the same, u can apply this settings

[@KobraXVI]

Settings crashes acer nitro 5

[@lucascontreras1486]

i do with the same i5 but i cant with 155 mi pc trows blue screen XD but it changes it to 110 and now I can play with the highest capacity of my processor but it still reaches 80º but without thermal throttling

[@unboxvibes2581]

that's great, the most important thing is removing the useless throttling :)

[@AlejandroGarcia-pn3oz]

Use at max 115 in both voltages or 110. I checked and they were the most stable values.

[@AlejandroGarcia-pn3oz]

@Steven Search in the folder the config file and delete it before open the program

[@dontbestupid6664]

Same processor. Didn’t do anything. Still shows 0.000 no matter how many times I do it. Ran as admin.

[@kostyaryapolov5533]

The latest BIOS update has cut down the ability to use undervolting on laptops..

[@nachosoto4568]

Me sale pantalla azul

[@vends4481]

My laptop crashes every time i try this

[@unboxvibes2581]

Maybe you undervolted too much

[@Smart_boy2001]

Just disable turbo and you will be fine

[@unboxvibes2581]

ya that will fix most cases :) , but it is also means that your PC will execute task slower (only stuck at 2.4 GHz)

[@Smart_boy2001]

@@unboxvibes2581 I disable it from bios above one year ago and my PC still working like a charm

[@zackralph793]

Temperature drop and fps drops as well hmm

[@zackralph793]

PostConsolePeasant no. Fps same either the lowest undervolt nor max performance still fps same

[@zackralph793]

PostConsolePeasant i mean is fps still same to whatever undervolt voltage i set

[@elerteeffi60]

@@postconsolepeasant6538 By doing it well you can increase a lot the fps too.

[@elerteeffi60]

@@postconsolepeasant6538 Side or direct effect it's still better for the fps, when we'll done. Even if it's only + 1 or 2.

[@jack4293]

@@elerteeffi60 undervolting is just done to reduce temperatures by compromising a little amount of performance. Some values increase the fps too for some reason I don't but performance drop is expected. Also, did you get better fps after undervolting?

[@Deshawnb13]

Why you incognito 🤔🤭

[@rrrr9195]

Thanks for the tutorial