aces wild card efi review on my 57chevy and bloopers at the end

Edited by VideoGuru:videoguru.page...
multi port fuel injections on my 57 with a mild 350 and roller cam

[@robsdeviceunknown]

Atleast you eventually got it going. I REALLY want to suppor t them as a great affordable fuel injection system alternative to Holly's super expensive set. But i have yet to find anyone happy with it. IF they get it working it does not last long and usually plagued with problems. I hope they get it worked out soon.

[@rockcustoms1695]

I had some problems to start with but its running pretty good and I'm having to figure out the computer part of the system because I'm not very tech savvy

[@wyattmartin7413]

are you still running this system? Thinking of putting one on my Mustang.

[@rockcustoms1695]

It is still on the car but I'm getting ready to ls swap the car. It is a better system than fitech but I think the factory efi is better If you do get a ace's efi the directions are awful, basically lock the distributor out like you would for a msd( they don't tell you to do that ) hook it up how you think it should go and start there

[@DadsOleGarage-jz3hw]

iF THE SHOP FLY WOULD HUNG ON FOR 30 more seconds

[@rockcustoms1695]

Lol you know them shop managers so dramatic

[@79seirra]

Still happy with the system? thinking about the Joker for my 383 but still on the fence about it.

[@rockcustoms1695]

I had the problem with it when I first installed But sent the ecu back and after that it's been pretty good. I really like the system and I'm getting ready to install a 383 lt1 with a vortec supercharger so we are going to see what this system can do..

[@nsmturbo5902]

I've got a few timing lights that look like that lol

[@rockcustoms1695]

I get them cheap so when I melt them down it doesn't hurt my feelings lol

[@DadsOleGarage-jz3hw]

Hey bro i have the handheld and ecu back from Aces I think after seeing yours after a reflash reload reboot I think this will be a great system I hate to sell Incase I ever do something else But I need to recoup some money from the Ultra Ram and Install I'm gonna get some pics up 1600 for the system I have a new coil In the Box and a spacer and Throttle bracket I will let go with it 150 if anyone should need the system comes with new k&n air filter Really good deal and two used 02's they are cheap enough if someone wants new ones- all 1750 great deal

[@rockcustoms1695]

Good deal man I will let my buddies know. how is the Camaro running now?

[@DadsOleGarage-jz3hw]

Running great been doing short trips this dang oil leak It go's in sept 6 see if they can find out where it is coming from get it on a rack I have been playing with the prime shot trying to find a sweet spot @@rockcustoms1695

[@10mmMotorsports]

Is that a one piece rear main block you’re using? If so , are you using a one piece rear main flex plate? Reason I ask, is because the starter doesn’t sound happy when cranking.

[@rockcustoms1695]

When I pulled the engine and transmission out of the 94 chevy 2500 I never pulled them apart and same thing for the starter... so should be all stock. I think some of the sound was because the timing was a little low

[@earljurgeluks3387]

Hey Rocky, I am looking at this system for my Camaro. After all your experience with this system would you still recommend it. Do you feel that the components will hold up?

[@rockcustoms1695]

Well I have only had my wild card running on my car for about a month now . But I really like it and it seems to be performing well. From what I've seen/read the aces efi use good quality sensors and when I had a problem with my ecu they wanted to help me. They sent me a new ecu no questions and when that didn't work I sent them both in and it turned out that there was a software problem, but they fixed it. If you have a problem call them they want to help, if they're efi has a problem they will fix it. Far as holding up I didn't know that yet but I don't have any concerns so far

[@earljurgeluks3387]

@@rockcustoms1695 Thanks, I was bummed you didn’t film the install ☹️. Maybe do a follow up of how you did the wiring. I’m curious of how you did the fuel delivery as well. Come on Rocky, your audience is waiting.

[@rockcustoms1695]

@@earljurgeluks3387 lol I screwed up and deleted some of the videos but I didn't spend a lot of time on the wiring. Every thing is labeled really well. You will have the map sensor, iac, air temp, water temperature, distributor , o2 sensors and the the 8 injectors that's about it for the engine. then there is a power and ground that go straigh to the battery And last is your keyed 12v power. Last is the ecu, 2 big plugs and mount it some were out of the way. It's not bad

[@rockcustoms1695]

@@earljurgeluks3387 the fuel system took a while because every time I needs a fitting I had to order it and wait for the mail. This was my first time using AN fittings and line on one of my cars so I didn't have pices in stock

[@rockcustoms1695]

@@earljurgeluks3387 if you want me to make a video covering this make me a list of what all you have questions about and I will see what I can do for you

[@ITSNOTMEITISYOU]

See you put the sticker on! Lol

[@rockcustoms1695]

I did. It's a cool sticker

[@hoonbag548]

I was curious if you had to tune it through there controller, or can you use a laptop, if you can use a laptop, what tuning software is used?

[@rockcustoms1695]

You can use both. And it comes with it's own tuning software ,but i don't know what they call it. You can tune it with a laptop for custom tunes or you can use the handheld for modifying the tune . I have not had to use the laptop at all . Hooked everything up did the wizard setup on the hand held and it has run pretty good. Getting ready to install a v2 supercharger, going to use the hand held to change the tune for that. They have great customer service so give them a call I'm sure they would be happy to answer any questions

[@DadsOleGarage-jz3hw]

They are great guys I have met with them They do care I think I may have been the 1st one out the door with the Joker system I had few missuses on my end One i have my batt in my trunk I used same size wire with the ecu WRONG it was dropping voltage Then i had the bungs welded in by the shop here He put them in the collector caused an issue as well The owner is great guy he and a tech Came in to the house He lapped top tuned it, it was running great the next day nothing I feel he did not save it to ecu I did reach back out I just went with the fitec ultra ram I had the ecu and handheld re booted upload new Sofware in the ecu and handheld I think they did same with Ricks his seems to be running great I have no doubt that the system will be good

[@hoonbag548]

@@DadsOleGarage-jz3hw eh few days too late already invested in another brand. hope everything is going well for you

[@DadsOleGarage-jz3hw]

@@hoonbag548 no problem keep us posted