Achieve Expert-Level Window and Door Layout Skills

  Рет қаралды 26,114

AwesomeFramers

AwesomeFramers

Күн бұрын

Пікірлер: 125
@jimanderson4495
@jimanderson4495 Жыл бұрын
You want comments? Ok….. I’m 80 and retired, live in 55+ community in Philly burbs. I do DIY stuff around the house. A little electrical(permit & inspected), plumbing(permit and inspected) and some furniture. I love the channel and have been watching since your early days. Wish I could fly out, watch and go get coffee/pizza. Thanks Tim.
@TBird89
@TBird89 Жыл бұрын
It’s good too see the Larry Haun approach to your thought process with a modern twist. You are very efficient Tim 🥇✌️
@MrTechFreaks
@MrTechFreaks Жыл бұрын
Loved the Larry Haun videos! Tim does great work!
@purplerays6
@purplerays6 3 ай бұрын
Stud, cripple here outside Chicago. Great to see a guy from my era, started in 92, still going strong. Love your show Tim, way to bring the young guys along.
@niclindsey7790
@niclindsey7790 24 күн бұрын
I love the rapid square. Can’t wait to get one.
@lorenrickey5481
@lorenrickey5481 Жыл бұрын
I also use that layout stick for marking my electrical outlet and switch box’s height in the houses. Works great.
@DUDE72341
@DUDE72341 Жыл бұрын
nice to see small details, like guard rails that protect your workers...not just a facade to make "The man" happy!
@antoniiocaluso1071
@antoniiocaluso1071 Жыл бұрын
old builder who enjoys your videos so much, , too! those little "tips" you slip in are MUCH-appreciated, and well-considered!! If I had kids who needed to learn the craft, this channel's videos are "must-see"! thanks for the hard-work makin' them for us. Easier to watch, than to do the work! :-) Nice wood.
@Dan-oz9rv
@Dan-oz9rv 11 ай бұрын
Very well thought out. A young man could learn a lot working with you.
@fuegoman45
@fuegoman45 Жыл бұрын
I love how the Perkins crew refers to their beam saw as the Larry Haun ❤
@lawrencecorbo6586
@lawrencecorbo6586 Жыл бұрын
These guys are on top of the tech the latest technologies !! I thank the person that lead me here !! But fair is fair from what I learned Larry Han, second to nobody yes up to date is important !! Like no plumbers puddy on delta plastic plumbing fixtures old school void the warranty yes
@purplerays6
@purplerays6 3 ай бұрын
I still have flat pencils from when the lumber yards gave them out, going to try the Pica when I build my own house this fall. No seismic stuff around here, that looks like a whole different animal. I started really watching with interest in the small details you do. Sealant under the green plate, Titan screws instead of j-bolts, taping the sheathing to the concrete. I really like to see the details that matter, and don't (maybe) cost a lot to implement. I'm definitely going to miss having the forklift on my job. We always had a Pettibone on the job when I last did residential back in the 2000's. I just found my stash of JLC and Fine Homebuilding that you wrote for back then. Keep it up.
@ShallShallShall
@ShallShallShall Жыл бұрын
I absolutely LOVE watching peolle who have passion for their craft. Brings so much inspirstion! Thank you for inspiring, kind sir!❤
@Just4Ever
@Just4Ever Жыл бұрын
I'm a software engineer that has no plans to build a home, but I love watching your videos. Interesting content and your videos are always funny and enjoyable. Keep up the great work!
@franciscoestrada31
@franciscoestrada31 Жыл бұрын
Pica dry large just like you have there. I do the same layout doors first and also do walls then I’ll do studs last. Generally use a tape and I do my best to match lower and upper. You rock boss!!
@nitro1380
@nitro1380 Жыл бұрын
Nail top and bottom plates together do layout on saw horses though to avoid being bent over more. Mark centers pulling a tape and hold a sharpie on layout and scribe across both plates. Takes practice to get it accurate but its fast and efficient and saves your back.
@robertjolliffe2612
@robertjolliffe2612 11 ай бұрын
Love the zip panel system. Australia doesn’t have it yet but will come a day. We need it. ATM our building is rubbish now as the school system has cut corners with beginner apprenticeship. Just crap here. I was spec building for 65 years. It’s been fantastic life for me. Love watching
@tealkerberus748
@tealkerberus748 Ай бұрын
I don't think we'll see all those plastics and adhesives in Australian building any time soon. It has to be bushfire safe, and half the chemicals the US manufacturers use are banned here because they're carcinogenic anyway.
@robertjolliffe2612
@robertjolliffe2612 Ай бұрын
@@tealkerberus748 interesting it is actually Australia is American dumping ground of chemicals manufacturing made & only sold in Australia. Our Australian government do as we are told by USA & moreover USA federal Reserve Bank that have controlled the Biden White House!!
@robertjolliffe2612
@robertjolliffe2612 Ай бұрын
@@tealkerberus748 go see a video Decentralized Medicine If you got the jab- you have SP 40. By Jack Kruse- assembly 2
@michaellatour9852
@michaellatour9852 Жыл бұрын
Love your videos! Working as a remodeler for the past 7 years starting out green as a sheet of zip. I use the regular pica pencil, and i love that thing. As far as layout, I just use my tape and step back depending on what thickness is needed. Thanks for sharing all your information with the world!
@hmtrimworks7148
@hmtrimworks7148 Жыл бұрын
At 14:30… I have been leaving all studs out for the wall pockets and use “The Nailer” drywall backing clips… also use the clips for the ceiling… saves time, material and gives better insulation… -I used the Dewalt roofing nailer to install them on the last house, it worked ok, but a heavy duty stapler would probably work better… I’m looking into the Milwaukee cordless fencing stapler for that.
@kmonk7853
@kmonk7853 Жыл бұрын
Hello from Canada, I’ve installed sooo many innotech windows and doors, they are good quality but not perfect. Doors were always a nightmare to get the latching mechanism to working smoothly. Also the metal clips you use to install the windows provide no thermal break as it transfers cold to the inside (minimal I admit, but still…). Anyway thanks for your awesome videos I learn a lot!
@mechanicalman1068
@mechanicalman1068 Жыл бұрын
I used a Big Foot adapter on a Skil for years then the Skil when they released their own. Now I use the cordless Makita. Better in every way.
@taylorvonwinckelmann904
@taylorvonwinckelmann904 Жыл бұрын
once again greatful for the context and information tim you rule! we use the pica dry out here in the PNW makes a huge difference when doing layout in the rain
@KrAsHtheKaRpEnTeR
@KrAsHtheKaRpEnTeR Жыл бұрын
Love those Pica's!! Love this channel!!
@KrAsHtheKaRpEnTeR
@KrAsHtheKaRpEnTeR Жыл бұрын
Also, I would love to join your crew, if you need a hand...
@lesk7427
@lesk7427 Жыл бұрын
Not a framer but enjoy your videos so much!
@ericlarkin6563
@ericlarkin6563 Жыл бұрын
I don't have one, I was a remodel guy, thank you for sharing how you do this.
@TBird89
@TBird89 Жыл бұрын
Tim…I just noticed and as usual your have installed a framers rail on the perimeter …safety first 👷🏻‍♂️👌🏻
@gregsidel3557
@gregsidel3557 4 ай бұрын
I really like your video thank you very much good job
@kellysmith3152
@kellysmith3152 Жыл бұрын
Very nice clean framing 👍
@jaywood8296
@jaywood8296 11 ай бұрын
Nice. Good to see you not over-nailing. As a remodeler, I shudder at what it will take to take apart the work of yahoos with nail guns. I mark both sides of the stud, but am not framing all the time. Looks like you are using two different speed squares- what's that about?
@sheltonsmith9270
@sheltonsmith9270 Жыл бұрын
I learned layout using a framing square marking edges. I think marking centers would be just as good and that layout tool is lit.
@ScatTheGat
@ScatTheGat Жыл бұрын
Lay out windows/doors, mark my first 15 1/4", tack a nail (or use my awl at the risk of getting made fun of) and pull my 16"s with X's on the right of the line. We call them jacks in Ontario, Canada and mark them as "O" on the plates. Use blocks from cutoffs to nail partition walls into 16" or 18" on centre depending on ceiling height, pulled from top for drywallers (48" or 54" sheets).
@davidflaugher7340
@davidflaugher7340 Жыл бұрын
I have the Makita 40v 10 1/4 inch beam saw I really like it! It's funny I was ordering the 7 1/4 inch 40v but accidentally ordered the 10 1/4! I decided to not return it because I've seen how much fun you have with yours! I also got the 7 1/4 too😊
@2point..0
@2point..0 Жыл бұрын
I just bought and still in the box A wonderful Makita 10 1/4 Beamer too!!!
@SteveKoppert
@SteveKoppert Жыл бұрын
Fraser valley framer, trimmers are referred to as cripples also by engineers. We don’t worry about stacking a joint on a stud it will get lapped with the top plate. We always mark to the sides of our studs always standard 16” o/c. Other than that pretty similar. For order of operations I like to load studs first, than cut cripples, at that point someone can start nailing while the other guy continues cutting headers, windows jacks and plates and than top plates, that’s also the order we build it in. If working solo I cut everything, lay it in place, than bang the whole wall off.
@mojodojo5533
@mojodojo5533 11 ай бұрын
We call them trimmers at the roof and Jack's at the walls. Cripples for short studs under windows.
@Shryquill
@Shryquill Жыл бұрын
Years ago before we had any mechanical pencils locally I imported some Koh-i-noor 5340 5.6mm Lead Holders, excellent art utensil, but rubbish for site work unfortunately, the end cap sharpener would always unscrew and fall off. Awesome video dude, one day I want to grow up to be like you. Already 27 though, so might've missed the boat there. 😁
@tealkerberus748
@tealkerberus748 Ай бұрын
That's young. You can definitely get into the building industry in your twenties.
@Flandersssss
@Flandersssss Жыл бұрын
Where can you get the adjustable layout stick? I only see the welded Bigfoot
@bobparrott9257
@bobparrott9257 Жыл бұрын
I love the tips and tool recommendations for when I build my house here in Florida... Unless you do winter side jobs on the road?
@yahmus
@yahmus Ай бұрын
I use the pica big dry as well. For 16” layouts I wear custom made size 24 boots, which are exactly 16” long heal to toe. This way I can literally step off the layout perfectly. Just kidding, but it does sound like the perfect layout tool for a company with the name Bigfoot!
@AlexofAddison
@AlexofAddison Жыл бұрын
I certainly don’t have any tips to give, but I am picking up a ton of knowledge. I laugh now thinking back to the couple of sheds and decks I’ve build over the years, without Timmy’s tricks 😂
@thomasfogerty3515
@thomasfogerty3515 10 ай бұрын
Love the shoes man! Awesome!
@CEngineering-pv8uw
@CEngineering-pv8uw 6 ай бұрын
Percentage wise, and on average, how much more does the 4X add to the cost of materials over the 2X in your area?
@Liazon098
@Liazon098 6 ай бұрын
I honestly like my kids pencils. I want a old school sharpener. Them wall types!
@MrBrianDuga
@MrBrianDuga Жыл бұрын
I have that pencil. I like it but the lead gets dull very quickly. Maybe you have found a harder lead for it.
@EzraGiesbrecht
@EzraGiesbrecht Жыл бұрын
Mark both sides of stud with framing square (surplus of info so young guys don’t make mistakes). Solo I might try just centres. Pica Big Dry, but leads and pencil quality leave me wanting. Last one lasted less then 6 months.
@ghettohey2388
@ghettohey2388 Жыл бұрын
Not a Framer but have a question on exterior wall framing. How do you determine what walls to frame and stand up first and what walls to butt up to the other wall. Do you just go with the longest walls first. Does it really matter. Btw I love watching your videos.
@michaelgarrow3239
@michaelgarrow3239 Жыл бұрын
Are your rake walls even with the top of the truss? I usually run the stem wall through and the rake wall buts, then a rafter over the rake wall. This takes care of any warping in the wood, framing error, and uneven concrete. Also I use graphite keel. It works in wet weather/wood. Sharpies don’t. Rock on!
@davepro1
@davepro1 Жыл бұрын
Always side marks! I use a plethora of marking tools all depending on required accuracy and durability. I’ve been exterior insulating since 2005. Glad to see the industry catching up. ZipR is not the answer for me, I prefer traditional structure with envelope entirely exterior. Joe Lstiburek’s (Building Science) been preaching perfect wall forever and a day.
@AwesomeFramers
@AwesomeFramers Жыл бұрын
I hear you, but if you get a chance to talk to Joe, you may change your mind....He's quite open in person.
@davepro1
@davepro1 Жыл бұрын
@@AwesomeFramers yes Joe is very accommodating and I’ve used ZipR in the past. The fastening is just a bit finicky and I don’t love the polyiso running up the wall like a fire chase inside the wall. Granted XPS on the exterior is only marginal better. When we can we exterior insulate with rock wool on 5/8” ply. The cost benefit for zipR is a wonderful value proposition and I’ve recommended it as an 80% solution to many clients as a consultant. As a builder and developer my results have been far superior with the “traditional” full exterior envelope. When building structure we reduce the amount of wood (24” OC power framing), and build the tightest frame possible. It’s part of my principle of keeping trades in their lane. One of the reason I forward your videos to my guys is your execution of sound tight framing principals. It’s not common to see craftsmen excelling at their craft now a days.
@ridgelineconstruction619
@ridgelineconstruction619 Жыл бұрын
Awesome video. Where do you get ur glasses??
@jimkeith2335
@jimkeith2335 Жыл бұрын
Wow three by material is pretty common here in SF.we often have to use it on bottom plates too.
@AwesomeFramers
@AwesomeFramers Жыл бұрын
Yeah, its annoying that it isn't common here.
@tealkerberus748
@tealkerberus748 Ай бұрын
Favourite part of this is the upstairs windows being directly over the downstairs windows. Can't go past good structural design like that.
@kierandoherty1600
@kierandoherty1600 11 ай бұрын
Hi. Greetings from ireland. Your tape looks like a milwaukee stud? How does it hold up to the rain and wet conditions?
@wesguice
@wesguice Жыл бұрын
I enjoy your videos, keep up the good work.
@joecahill8165
@joecahill8165 Жыл бұрын
Beautiful
@yuvanbaldwinew9282
@yuvanbaldwinew9282 Жыл бұрын
Awesome thanks
@lokreds
@lokreds 6 ай бұрын
I do x and o’s and c for crips
@jrdc345
@jrdc345 Жыл бұрын
How come you sometimes switch which side you mark on your stud layout stick?
@AwesomeFramers
@AwesomeFramers Жыл бұрын
Easier to see is all. I just have to make sure I adjust correctly
@pdcro1247
@pdcro1247 Жыл бұрын
How much bigger do you leave your rough openings for windows doors inside and outside, and French doors.
@khass110
@khass110 Жыл бұрын
I use the Pica-Dry 3030 pencil, but have yet to find decent refills. The Pica-Dry refills break like grandma hips, as do the Hultafors and the generic offshore Amazon offerings. Colored leads (white, yellow, red) are even worse, but I attribute that to the nature of materials used to make the colors. The ONLY "refills" I've found to be any good are the 2 sticks that come with the Pica-Dry 3030 itself, but I think it's crazy to have to buy a new $15 pencil every time I need new lead. Any suggestions? Pica company was of zero help.
@lorenrickey5481
@lorenrickey5481 Жыл бұрын
How about Ox?? They make mechanical pencils too.
@khass110
@khass110 Жыл бұрын
@@lorenrickey5481 I'll give them a try
@lorenrickey5481
@lorenrickey5481 Жыл бұрын
Also…. After further research check out Lee Valley tools they sell replacement leads for the Picas that are stronger and water resistant
@jordansingle1198
@jordansingle1198 Жыл бұрын
Your 16’ material is consistent enough you can cut the side you flush up? Around here the other side could be 1/2” or more out
@AwesomeFramers
@AwesomeFramers Жыл бұрын
yep
@rfldss89
@rfldss89 Жыл бұрын
I was just about to say. Those gotta be calibrated pretty well for someone this confident cutting like that
@Spice1_
@Spice1_ Жыл бұрын
Thank you for this
@backwardsrun
@backwardsrun Жыл бұрын
I hope you make money off these videos because your worth a lot thanks for sharing your skills
@msintern99
@msintern99 2 күн бұрын
Why did you change what side of the layout stick stud you marked the line on, very confusing to watch.
@buildzilla
@buildzilla 5 ай бұрын
off topic, what's your take on 3/4" subfloor v 1-1/8"?
@AwesomeFramers
@AwesomeFramers 5 ай бұрын
1 1/8" is a waste of time most of the time, 60% of the time
@buildzilla
@buildzilla 5 ай бұрын
@@AwesomeFramers 80% of the time it's a waste, but the other half of the time it's great 😆 i guess it's all about the structure, but generally if u r using 11-7/8" i-joists @ 16oc with span
@rogerhodges7656
@rogerhodges7656 Жыл бұрын
Production framers in the south and southwest only use center marks.
@gregorymacneil2836
@gregorymacneil2836 Жыл бұрын
I like my Leica disto!
@zephyr1408
@zephyr1408 Жыл бұрын
Take it easy Tim , I still work in my 60’s but I can tell you almost blew a lung live at 5 on YT ! Just the facts Sir , Just the facts ! No news headlines “FRAMER UHLER GOES DOWN WITH BOINK IN THE HEAD VIDEO HERE”! ( sorry I slaughtered your last name). Great video!
@AwesomeFramers
@AwesomeFramers Жыл бұрын
Nah bro, no lungs close to being blown. I hit the stair master for 100 flights 3x/week. Just got back from a 10 mile hike to see the Larch trees.
@zephyr1408
@zephyr1408 Жыл бұрын
@@AwesomeFramers wow I love the high country ! Esp now! Sit down hear the wind start thru the trees a 1/4 mile off then over you! Yeah love that country your in! I am in Nor Cal between Sacto & Chico ! But I hv to say you hv a slice of Heaven! Oh? No stair master but Bike and Burpees ! Keep ‘em coming Tim love those videos ! And that twirling lay out stick was FUNNY!
@AwesomeFramers
@AwesomeFramers Жыл бұрын
@@zephyr1408 I'll try and put together some of the pics from the Lake Ingalls hike, but the larches were stunning! Bright orange and blue skies. We live in a very beautiful place.
@zephyr1408
@zephyr1408 Жыл бұрын
@@AwesomeFramers that would be great Tim maybe slip it in there. I am a fly fisher men & hv been over 30 yrs. Taught my son and he teaches his wife & girls ! I just started my grandsons ! I fish the headwaters of the North Fork of the FeatherRiver, Kings Creek out of Lassen , Warren Creek, all over ! But where u are is stunning ! Great to hear you appreciate God’s perfect canvas ! It helps clear your head for what you do! I am a retired Police Sgt (Homicide Det ) now a finish carpenter on my own ! Doing mostly cabinets , doors, custom pieces if the pay is right! Take care , stay safe , very dangerous being a framer !
@bravo5997
@bravo5997 Жыл бұрын
So the most important tool on the construction site that everyone has is a folding rule. The best are those from the company Adga from Mainhardt Germany
@user-hz9om3zy9o
@user-hz9om3zy9o Жыл бұрын
yo what shoes are those? Great video thanks for sharing!
@user-hz9om3zy9o
@user-hz9om3zy9o Жыл бұрын
Nevermind I found them, Keens. they look nice.
@bwillan
@bwillan Жыл бұрын
Why do you make your marks as a 'v' instead of a just a tick mark?
@AwesomeFramers
@AwesomeFramers Жыл бұрын
I'm not sure. I think I was taught that so the tip of the "v" is the actual measurement.
@user-hz9om3zy9o
@user-hz9om3zy9o Жыл бұрын
I like my Zebra .5 mechanical pencil but that's for finish work : )
@highdesertjohn
@highdesertjohn Жыл бұрын
I have had the bigfoot 10 1/4" beam saw, i currently have the skill sawsqwatch 10 1/4" which i like better than the Bigfoot. I deffenitly want the makita cordless 10 1/4"
@baja613
@baja613 Жыл бұрын
My least favorite layout tool was the “tool” that used to work for me and would “lay out” every time I really needed him!
@AnthonySomes
@AnthonySomes Жыл бұрын
Wood or metal studs. I prefer side layout.
@2010stoof
@2010stoof 29 күн бұрын
Ame link for tools you recommend broken
@AwesomeFramers
@AwesomeFramers 28 күн бұрын
works not, thanks!
@stevew9563
@stevew9563 Жыл бұрын
Maybe you should do a layout all in MM for the international viewers?
@AwesomeFramers
@AwesomeFramers Жыл бұрын
Its all about principles, the unit of measurement doesn't matter.
@rulowth4815
@rulowth4815 Жыл бұрын
😊
@sam_fujiyama
@sam_fujiyama Жыл бұрын
If i remember anything from this video, it will be the moment at 9:30 😂. Also something about 16" on center blah blah....
@AwesomeFramers
@AwesomeFramers Жыл бұрын
Right? I forgot I had that clip until I got to that part of the voiceover. Searched my Google Photos for the gym location and found that. Truthfully, my favorite part of the video
@sam_fujiyama
@sam_fujiyama Жыл бұрын
@@AwesomeFramers In all seriousness, great video with lots of useful and time saving tips. I'm not a professional framer, but very much enjoy watching Larry Haun's videos for his gentle nature, generosity, wisdom and mentorship. You have those qualities as well, in addition to the cool gear, cinematography, humour, and stunning good looks.
@mojodojo5533
@mojodojo5533 11 ай бұрын
As a professional draftsman, is there anything you would want to see on the plans that would make life easier for you and your crew?
@AwesomeFramers
@AwesomeFramers 11 ай бұрын
More dimensions is always a good thing. I've been working a plan this week and the architect has the dimensions nowhere near where it makes sense. I have to go to the to the foundation plan to find the dimension that should be on the floor plan. I couldn't find the porch dimension for the piers on the foundation plan. It seems quite obvious to me this architect has never had a conversation with a framer or foundation sub. Additionally when I scroll the pages in PDF, the floor plan is always in a different place on the page, so I have to navigate around. Its a little thing, but makes it hard when nothing I need is on the right page. Its organized very oddly.
@mojodojo5533
@mojodojo5533 11 ай бұрын
@AwesomeFramers thanks for the reply. We usually have foundation /floor framing, main and upper level plans, then roof plan and framing in that order. Followed by elevations and sections. Typically dimension porch piers to centerline in case builder wants to change pier size. We get some who complain that we don't have window rough openings on plan, but more times than not window mfr changes so our windows sizes are nominal.
@AwesomeFramers
@AwesomeFramers 11 ай бұрын
@@mojodojo5533 nominal on windows is good. Too much changes between drawing and actual construction.
@benfowler2127
@benfowler2127 Жыл бұрын
I too had hair in 2006 😂
@arthurkilmon
@arthurkilmon Жыл бұрын
Bigfoot all the way. I make both sides of the studs with a pica
@MatthewHunting-ui9oj
@MatthewHunting-ui9oj Жыл бұрын
I love lumber crayons 🖍️ 🖍️
@yahmus
@yahmus Ай бұрын
I don’t have a beam saw… yet
@billyslocumb7265
@billyslocumb7265 Жыл бұрын
What happened to the old Kyle?
@richardkoontz831
@richardkoontz831 Жыл бұрын
Why not trash containers, handle cut offs once
@AwesomeFramers
@AwesomeFramers Жыл бұрын
We have one but it hadn't been moved close to the house yet. Machinery was operating
@richardkoontz831
@richardkoontz831 Жыл бұрын
Sorry pet peeve of mine, second only to the guy who throws it BESIDE the trash can ..😅
@josehuertainsb
@josehuertainsb 11 ай бұрын
Here's a pro tip never ever line up your plates they should be staggered
@mechanicalman1068
@mechanicalman1068 Жыл бұрын
Hey. Not directly related to the video but I’m guessing I’m not the only one getting private responses to my comments saying to “get rid n touch. I have something for you.” Looks like a scam. Hoping Mr. Awesome Framer will chime in with an official heads up.
@Overkillutube
@Overkillutube Жыл бұрын
so glad that went in the trash. I'm not the one, but woulda done the same.
@highdesertjohn
@highdesertjohn Жыл бұрын
Trimmers!! Not jack stud
@charlesviner1565
@charlesviner1565 Жыл бұрын
👍🔨📐
@DORNJustDORN
@DORNJustDORN Жыл бұрын
If you are gonna quote movie lines at least quote it right, "There can be only one!" rotflmao "I hate it when they get the words wrong..."
@AwesomeFramers
@AwesomeFramers Жыл бұрын
Its also a highlander reference.
@nickfish3545
@nickfish3545 Жыл бұрын
Gotta be 30 or older to get the highlander reference
@mattkennerson1060
@mattkennerson1060 10 ай бұрын
M77
How to Install Windows Properly | Step-by-Step Guide |
19:12
AwesomeFramers
Рет қаралды 13 М.
Expert Tips: Building Your Own Deck
27:06
AwesomeFramers
Рет қаралды 89 М.
Family Love #funny #sigma
00:16
CRAZY GREAPA
Рет қаралды 17 МЛН
小蚂蚁会选到什么呢!#火影忍者 #佐助 #家庭
00:47
火影忍者一家
Рет қаралды 126 МЛН
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18
Project 150 Episode 4 Framing Out the Crawlspace
28:55
AwesomeFramers
Рет қаралды 115 М.
How to Install a Prehung Door FAST
16:17
AwesomeFramers
Рет қаралды 29 М.
WRB Details - Ep. 9 - Timber Frame Build Start to Finish
12:26
Lange Custom Builders
Рет қаралды 1,3 М.
Warning: How to Fix A Sagging Beam
33:05
AwesomeFramers
Рет қаралды 415 М.
Roof Framing 101 Scotch Valleys & Snub Hips
29:21
AwesomeFramers
Рет қаралды 70 М.
The Right Way to Install Subfloor #quality
39:23
AwesomeFramers
Рет қаралды 67 М.
Wall Framing Connections and Corners - A Lesson from our Framing course - TEACH Construction
14:06
TEACH Construction Community Education
Рет қаралды 630 М.
Framing Pro Tips
17:28
Essential Craftsman
Рет қаралды 3 МЛН
How to Frame a Roof
32:15
AwesomeFramers
Рет қаралды 81 М.
Family Love #funny #sigma
00:16
CRAZY GREAPA
Рет қаралды 17 МЛН