Tap to unmute

Acrylic glass frameless picture enlargement having glass holder 📌

  Рет қаралды 20,367

Elohim_art07

Elohim_art07

Күн бұрын

Пікірлер: 86
@HarmonyChidi-r2p
@HarmonyChidi-r2p 22 күн бұрын
Does acrylic glass has it own gum when u place it on the picture or u apply gum to the glass to enable it to lap on the picture
@elohim_art07
@elohim_art07 22 күн бұрын
@@HarmonyChidi-r2p please take your time and give a close attention on any video. And do your best to learn by watching different videos on this channel. No gum at all on the Acrylic Glass and no gum will be applied on the Glass 🚫 please 🙏🏾❤️‍🩹
@HarmonyChidi-r2p
@HarmonyChidi-r2p 22 күн бұрын
@elohim_art07 okay thanks
@EuphemiaOkoye
@EuphemiaOkoye Жыл бұрын
This video is very helpful and super easy to understand,bit please i still have a question. There was a pount where yiu first unraped the acrylic glass and placed it on the pocture, tuen yiu removed it again before placung it back on the picture agian, how vome it didnt stick to the picture, and why did yiu do that?
@elohim_art07
@elohim_art07 Жыл бұрын
First of all, the Glass is not sticky in nature. Only the paper covers are sticky. So, I remove, replace and remove and replace again to get the exact side the edges should be to be balanced
@faniyifelicia6451
@faniyifelicia6451 Ай бұрын
Did also make hole on the board ? Or you just make hole on the glass alone?
@elohim_art07
@elohim_art07 Ай бұрын
@@faniyifelicia6451 the both, just take your have another videos to understand well ❤️‍🩹
@jude_arts_
@jude_arts_ 4 күн бұрын
Name of the printer. And can it print wider than 3 feet or 36ins?
@elohim_art07
@elohim_art07 2 күн бұрын
@@jude_arts_ HP Design
@jude_arts_
@jude_arts_ Күн бұрын
@elohim_art07 no code attached? Okay. Thank you
@elohim_art07
@elohim_art07 Күн бұрын
@@jude_arts_ HP Designjet 500
@kammakaze2397
@kammakaze2397 8 ай бұрын
Pls how did you get the picture to be sparkling Also this video was very helpful thanks
@elohim_art07
@elohim_art07 8 ай бұрын
That's what lamination does... Watch other videos to see how to do lamination
@kammakaze2397
@kammakaze2397 8 ай бұрын
Ok thanks
@marvelouschukwunomso5149
@marvelouschukwunomso5149 Жыл бұрын
This video was very helpful. Thank you so much. I just subscribed to your channel 🤍
@elohim_art07
@elohim_art07 Жыл бұрын
Glad it was helpful!
@favourg2
@favourg2 8 ай бұрын
Nice job
@BenitaMonday-c5u
@BenitaMonday-c5u 2 ай бұрын
bro I love this
@UgborVictor
@UgborVictor 3 ай бұрын
What type of paper are you using to print out the pictures
@elohim_art07
@elohim_art07 3 ай бұрын
@@UgborVictor SAV printing paper
@UgborVictor
@UgborVictor 3 ай бұрын
What type of plywood can I be using please
@elohim_art07
@elohim_art07 3 ай бұрын
@@UgborVictor take out time to watch videos... Each video has an answer to your question please 🙏🏿
@Skyl4tunz
@Skyl4tunz 5 ай бұрын
Where do you purchase these acrylic glass please?
@elohim_art07
@elohim_art07 5 ай бұрын
@@Skyl4tunz the video is in this channel please... Locate with title please
@KingsleyOkowkno
@KingsleyOkowkno 5 ай бұрын
Amazing
@RaphealSaahKwabena-tb3jb
@RaphealSaahKwabena-tb3jb 10 ай бұрын
How do you fix the acrylic glass to the work piece,
@elohim_art07
@elohim_art07 10 ай бұрын
Please do well to watch other videos in this channel. You can't learn with only one video. Every Video in this channel has an answer to your question please
@jonathanrosariofelix2081
@jonathanrosariofelix2081 9 ай бұрын
Muy bn tu trabajo
@elohim_art07
@elohim_art07 9 ай бұрын
@@jonathanrosariofelix2081 Muchas gracias
@UgborVictor
@UgborVictor 3 ай бұрын
Can I use any gum or did it has any specific gum
@elohim_art07
@elohim_art07 3 ай бұрын
@@UgborVictor use the kind of gum you are seeing on my hand please... Isostik, efostic gum etc
@OlabimitanNifemi
@OlabimitanNifemi 8 ай бұрын
Sorry pls which app do you use for the picture editing and is it normal printer ill use for printing it
@elohim_art07
@elohim_art07 8 ай бұрын
System was used to edit the picture. It's HP Design printer that printed the picture.
@funnymouthentertainment5260
@funnymouthentertainment5260 5 ай бұрын
@@elohim_art07what’s the cost of MDF board for size 14 X 18
@marvelouschukwunomso5149
@marvelouschukwunomso5149 Жыл бұрын
Okay sir the glass holder is used for holding the glass firmly to the wood right?
@elohim_art07
@elohim_art07 Жыл бұрын
Exactly 💯
@ocheketurah6280
@ocheketurah6280 Жыл бұрын
Where can I get those things am in Lagos
@elohim_art07
@elohim_art07 Жыл бұрын
@@ocheketurah6280 check out where building materials are sold?
@jacintaigwe-tk5kh
@jacintaigwe-tk5kh 9 ай бұрын
How much do sell those pictures
@olajumokeramadan2653
@olajumokeramadan2653 7 ай бұрын
Sir❤❤ Where can i get the acylic glass?
@elohim_art07
@elohim_art07 7 ай бұрын
@@olajumokeramadan2653 the video is in this channel, watch other videos bcz every Video in this channel has an answer to your question
@bakryola5381
@bakryola5381 5 ай бұрын
How much will it cost me to buy all this material....I want to make one of 2 by 4ft
@DoosuurMson
@DoosuurMson Ай бұрын
That is good but I made a mistake in the back wall holder
@elohim_art07
@elohim_art07 Ай бұрын
@@DoosuurMson Practice make perfect 😊❤️‍🩹🖼️ Keep pushing 👊🏿🖼️❤️‍🩹
@LohChia
@LohChia Жыл бұрын
Is that a normal photo paper or glassy paper printed on HP designjet
@elohim_art07
@elohim_art07 Жыл бұрын
That is HP High-gloss photo paper
@FrancisOyadiran
@FrancisOyadiran 5 ай бұрын
Please where can someone one get the materials, thanks
@elohim_art07
@elohim_art07 5 ай бұрын
The video is in this channel please 🙏🏿... Watch to have their contacts over the videos 🙏🏿❤️‍🩹
@learnwithemma6116
@learnwithemma6116 5 ай бұрын
@@elohim_art07I have watch but is there a place in Ghana we can get the acrylic glass?
@elohim_art07
@elohim_art07 5 ай бұрын
@@learnwithemma6116 of course, once you check out. You will definitely find
@BenitaMonday-c5u
@BenitaMonday-c5u 2 ай бұрын
@@elohim_art07 is possible to have this in Nigeria
@okiki-jesuolusegun-ola6479
@okiki-jesuolusegun-ola6479 Ай бұрын
Yes it is anywhere you are​@@BenitaMonday-c5u
@bampelexperience513
@bampelexperience513 Жыл бұрын
Plz sir me am scared with the galss holder hope is not going to break why doing it,also what am my going to use to dig the hole
@elohim_art07
@elohim_art07 Жыл бұрын
If u check my videos, I use scissors ✂️. Please take time to engage on videos to understand faster as you're learning
@elohim_art07
@elohim_art07 Жыл бұрын
Take time to watch the video and other videos very well
@ocheketurah6280
@ocheketurah6280 Жыл бұрын
How do you make the hole since is glass
@nineclanculture
@nineclanculture 6 ай бұрын
Hi What kind of glue is that!?
@elohim_art07
@elohim_art07 6 ай бұрын
@@nineclanculture isostik glue
@jennypearl3280
@jennypearl3280 10 ай бұрын
Pls how do I get the glass holder
@elohim_art07
@elohim_art07 9 ай бұрын
Check out other videos in this channel to have your answer please 🙏🏿... Every Video in this channel has an answer to your question
@JustinaOde-l9j
@JustinaOde-l9j 6 ай бұрын
Please what type of paper do u print on
@elohim_art07
@elohim_art07 6 ай бұрын
@@JustinaOde-l9j SAV printing paper
@IshiekweneVictory-o1f
@IshiekweneVictory-o1f 10 ай бұрын
Please sir what is that name of the printed picture
@elohim_art07
@elohim_art07 10 ай бұрын
SAV printing
@Diamondlart
@Diamondlart 11 ай бұрын
The oil gum name is what?
@elohim_art07
@elohim_art07 11 ай бұрын
Check the video on short feed in this channel please
@SaviourIsaiah-l4d
@SaviourIsaiah-l4d 7 ай бұрын
What's the glass holder stuff called
@elohim_art07
@elohim_art07 7 ай бұрын
@@SaviourIsaiah-l4d Glass screw /holder 📌
@turkanak.e551
@turkanak.e551 6 ай бұрын
Mmetucheza😂😂
@bigkingstudio5166
@bigkingstudio5166 5 ай бұрын
Please the board name
@elohim_art07
@elohim_art07 5 ай бұрын
MDF board
@bigkingstudio5166
@bigkingstudio5166 5 ай бұрын
How am I going to print the photo is it in sticker form
@elohim_art07
@elohim_art07 5 ай бұрын
@@bigkingstudio5166 watch other videos to see how photos are printed and laminated, thanks
@Sunnyblesstv
@Sunnyblesstv 2 ай бұрын
Is sticker good for frame also?
@elohim_art07
@elohim_art07 2 ай бұрын
Yes, definitely
@elohim_art07
@elohim_art07 2 ай бұрын
Yes, definitely
@elohim_art07
@elohim_art07 2 ай бұрын
Yes, definitely
@BlessingBliss-w4t
@BlessingBliss-w4t 6 ай бұрын
If you don’t want to put glass holder in d frame nko
@elohim_art07
@elohim_art07 6 ай бұрын
@@BlessingBliss-w4t your choice The video is in this channel.
@Clef-mw9ij
@Clef-mw9ij 10 ай бұрын
You video is not stable 😒
@elohim_art07
@elohim_art07 10 ай бұрын
Pele
@UgborVictor
@UgborVictor 3 ай бұрын
Can I use any gum or did it has any specific gum
@IfeomaOkafor-v3j
@IfeomaOkafor-v3j 3 ай бұрын
Nice job
@Diamondlart
@Diamondlart 11 ай бұрын
The oil gum name is what?
@elohim_art07
@elohim_art07 11 ай бұрын
Efostic or isostik You will find the video on short feed in this channel
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН
how to frame enlargement pictures
9:08
Bkz TV
Рет қаралды 10 М.
tableau personnalisé PVC complet
12:19
INDUBITABLEGRAPH
Рет қаралды 3,7 М.
How to Make a Picture Frame 3 Ways | DIY Woodworking
11:03
Fix This Build That
Рет қаралды 2,8 МЛН
How to frame pictures DIY (full video) #frame Enlargement
12:25
Mycode Software Solutions
Рет қаралды 1,1 М.
How to Make a Canvas Print - Watch the Canvas Being Made
2:09
PosterBurner Custom Poster Printing
Рет қаралды 387 М.
Wholesale Picture Frames - How To Make Picture Frames For You(https://valen.en.alibaba.com)
1:51
Hualun Guanse Factory Frame Moulding King Zhang
Рет қаралды 125 М.
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН