Рет қаралды 135,249
My #Audi #A4B8 2011 dorectal, audio system Audi Concert
The list of url encodings, which I've included in this video:
1: 09-shooter Test
2: 13-battery Status in CAR menu
3: 54 - Graphic Parktronic (if there are only rear sensors)
6: 05-oil Temperature and stopwatch (only since 2010)
8: 09-emergency brake Indication
9:18 - Comfort closure-opening Windows
10:10 - off-Time multimedia
11: 14 - alarm sound (not working)
12: 42-TPMS tire pressure Monitoring (not earned)
==========================
A link to the forum Audi Club www.audi-club.ru/threads/faq-...
==========================
Read more about #coding
1) arrow Test [17-instrument Panel]
[Coding - 07] - [long coding] - Byte 1 Bit 0 - Change 0 to 1
2) Activation of battery charge indication for non-MMI.
[56-Radio] [Adaptation-10] - Channel 39
To the existing value, add the number 16( Battery Status), save, in the CAR Menu will display the battery charge. The new value is 65535 (the original - 65519)
3) Activation of the graphical sensors, if the car originally equipped with rear Parking sensors and no graphics only CORESTYLE:
[10 - Parking Assistant] [Login II - 16] Enter the code 71679
[Coding - 07] - [long coding] - Byte 4 Bit 0 - Change 0 to 1
4) Stopwatch + engine oil temperature (oil temperature is displayed only since 2010 m. g.)
[17 - Dashboard] [Coding - 07] - [long coding] - Byte 1 Bit 3 - change the 0 to a 1
5) indication by turn signals and / or brake lights in case of emergency braking
[46 - comfort pack] [Coding - 07] - [long coding] - Byte 8:
Bit 0 - emergency brake indication with turn signals (1 = On)
1 Bit - indication of emergency braking by stop-signal (1 = Enabled)
6) Comfortable opening / closing of glasses. When you press and hold close/open on the remote, the Windows will close or open accordingly.
[46 - comfort pack]
[Coding - 07] - [long coding] - Byte 2 Bit 2 - Change 0 to 1
Then on the CAR menu toolbar "Windows conv. open" (for front and rear Windows, optional)
7) MMI or Audi Concert shutdown Time after ignition off
[56-Radio] [Adaptation-10] - Channel 03, change 10 to any value, up to 99 (in minutes)
turn on the double beep when removing the alarm
8) Enable double beep when removing the alarm (if this option is available)
[46 - comfort pack]
[Adaptation-10] - Channel 63-Add 4 to existing value.
For example, if it was 40, the new value should be 44.
9) tire pressure Monitoring (TPMS)
-for Non-MMI-
[56 - Radio] [Coding - 07] - [long coding] - Byte 8 Bit 6 - Change 0 to 1
for MMI 2G-
[07-Control Head] [Adaptation-10] - Channel 01 add 16 to current number
-for MMI Plus (MMI 3G)-
[5F - Information Electr.]
Car - Cardevicelist - RDK (mark)
Car - Carmenuoperation - Tire pressure control (set 5).
Reset MMI
Next, all configurations are the same:
[03 - ABS/ESP] [Login II - 16] code 61378
[Coding - 07] - [long coding] - Byte 1 Bit 3 - change the 0 to a 1
[17-instrument Panel]
[Coding - 07] - [long coding] - Byte 4 Bit 0 - Change 0 to 1
Then, "learning" through the menu, on a flat surface!
==========================
Additionally, the video is not included-disable the control of reversing lamps, rear turn signals, rear fog lamps.
If for some reason you need to disable verification of the backup lamps (for example, put the led/xenon to be, etc.).
Disabling control of the backup lamps.
[46 - comfort pack] [Login II - 16] Code 16017
[Adaptation-10] - 181 channel-subtract 3072 from the value, test-save.
(Example: for option "sedan" was 65535 became 62463).
Disable control lamps rear turn signals.
[46 - comfort pack] [Login II - 16] Code 16017
[Adaptation-10] - 181 channel-subtract 12288 from the value, test-save.
Disabling control of rear fog lamps.
[46 - comfort pack] [Login II - 16] Code 16017
[Adaptation-10] - 181 channel-subtract 768 from the value, test-save.
All, there are no errors neither in memory nor on the panel, but also test / control lamps ZH no.
If you have installed replaced the reversing lights, rear fog lights and rear turn signals-the value in the 181 channel should be: 49407
Off control backlight rooms
[46 - comfort pack] [Login II - 16] Code 16017
[Adaptation-10] - 192 channel - subtract "1" from the value, test-save.
The idea is to get the value " 2 "instead of"3".
===================================
My blog on DRIVE2 www.drive2.com/r/audi/a4/5375...